İşgören performansı dikkate alınarak U-tipi montaj hatlarının dengelenmesi
Balancing U-shaped assembly lines by considering worker performance
- Tez No: 389335
- Danışmanlar: DOÇ. DR. ŞULE ITIR SATOĞLU
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Endüstri Mühendisliği Bilim Dalı
- Sayfa Sayısı: 109
Özet
Montaj hatları seri üretim sistemlerinde çok miktarda, hızlı ve yüksek kalitede üretim gerçekleştirmek için kullanılan en önemli üretim araçlarından biridir. Günümüz rekabet koşullarında, montaj hatlarının etkin ve verimli bir şeklide kullanılmasının önemi giderek artmıştır. Bu nedenle, işgücü, malzeme, donanım ve diğer girdilerin işletmenin amaçları doğrultusunda ne kadar etkili ve yeterli kullanıldığı belirleyici bir unsurdur. İşletmeler için en önemli üretim planlama faaliyetlerinden biri Montaj Hattı Dengeleme çalışmasıdır. Bu konu hakkında, araştırmacılar tarafından çok sayıda çalışma yapılmış ve farklı çözüm yöntemleri önerilmiştir. Bir montaj hattının ilk kurulumu ya da yeniden tasarlanması yüksek miktarda yatırım gerektirdiğinden, hattın yerleşim planı karar vericiler için büyük öneme sahiptir. Endüstrileşme sürecinde, Tam Zamanında Üretim (Just in Time) ilkesinin uygulanmasıyla birlikte U-tipi hat yerleşimi yaygınlaşmış ve birçok avantajından dolayı bu hatların kullanımı giderek artmıştır. Montaj Hattı Dengeleme (MHD) çalışmalarının çoğunda problemin çözümünü kolaylaştırmak amacıyla birçok varsayım yapılmaktadır. Bu varsayımlardan en önemlisi ve dikkate alınması gereken faktör işgörenlerdir. Klasik MHD çalışmalarında, her işgörenin her işi gerçekleştirebildiği ve iş öğelerinin işlem sürelerinin işgörenlerden bağımsız olduğu varsayılmaktadır. Bu nedenle, literatürdeki birçok çalışmanın gerçek hayata uygulanabilmesi mümkün olmamaktadır. Bu eksikliği gidermek amacıyla iş öğelerinin işlem sürelerinin işgörenlerin performansından bağımsız olmadığı bir matematiksel model önerilmiştir. Bu modelde deneyimsiz ve dezavantajlı işgörenler de dikkate alınmıştır. Bu çalışmanın özgün yönü, literatürde işgören performansı dikkate alınarak istasyon sayısının ve işgören atamasının eş zamanlı olarak optimize edildiği ilk çalışma olmasıdır. Bu çalışmada, işgören performansı dikkate alınarak tek modelli U-tipi Montaj Hattı Dengeleme çalışması yapılmıştır. Amaç, belirli bir çevrim süresi için, eş zamanlı olarak istasyon sayısının minimize edilmesi ve işgörenlerin optimum şekilde istasyonlara atanmasını sağlamaktır. Böylelikle, işgörenlerden ve istasyonlardan optimum faydayı elde etmek, dolayısıyla maliyetleri azaltmak hedeflenmiştir. Bu amaçla, Urban'ın (1998) U-tipi montaj hatları için önerdiği Tamsayılı Doğrusal Programlama Modeli temel alınarak yeni bir Doğrusal Olmayan Tamsayılı Programlama Modeli geliştirilmiştir. Bu modelde, literatürde olmayan bazı kısıtlar modele dâhil edilmiş ve bazı kısıtlarda işgören performansı dikkate alınarak değişiklikler yapılmıştır. Önerilen model, GAMS (General Algebraic Modeling System) modelleme sisteminin BARON (Branch-And-Reduce Optimization Navigator) çözücüsü kullanılarak iki örnek problem için test edilmiş ve sonuçlar işgören performansının dikkate alınmadığı durum ile karşılaştırılmıştır. Uygulama çalışmasından elde edilen sonuçlar, işgören faktörünün dikkate alındığı durumda daha iyi bir hat dengesinin elde edilebildiğini göstermiştir. Bununla birlikte, önerilen model işgören performansının dikkate alınmadığı duruma göre daima daha az sayıda istasyon kurmayı garanti etmemektedir. Bu model ile optimum ve sürdürülebilir bir hat dengesinin elde edilebileceği ifade edilmektedir.
Özet (Çeviri)
Assembly lines are flow-oriented mass production systems where the productive units or stations perform the operations. An assembly line consists of a sequence of m stations through which the product units proceed. Each station performs a subset of the n operations necessary for manufacturing the products. Assembly lines have been used for faster, cheaper, more quality and more production in industrial systems. Therefore, assembly line balancing is a very important production planning activity for the production systems. The design of an assembly line requires tasks to be grouped into stations such that the precedence relations among the tasks are satisfied and some performance measures are optimized. This problem is known as Assembly Line Balancing Problem (ALBP). Generally, in ALBP studies, there are a lot of assumptions for simplifying the solution of the problem. As a result of several simplifying assumptions, this problem was called Simple Assembly Line Balancing Problem (SALBP) (Baybars, 1986). Traditionally assembly lines are arranged in a straight line. However, the implementation of Lean Manufacturing and Just in Time Production (JIT) systems entail U-shaped assembly line (Chiang, 2006). The associated line balancing problem is called UALBP, which was introduced by Miltenburg and Wijngaard (1994). Compared to traditional straight lines and parallel lines, U-shaped assembly lines have lots of advantages in terms of performance of workers and production system. Especially, by means of U-shaped layout, improved balancing of assembly lines can be achieved (Scholl and Klein, 1999). This is due to the fact that precedence constraints of the U-shaped lines are more relaxed than those of the straight lines, such that, a task can share a station with any of its predecessors and/or any of its successors (Scholl and Klein, 1999). This provides solution of the problem with a better line efficiency and lower line imbalance. The implementation of Lean Manufacturing systems entail U-shaped assembly lines, since one-piece flow can be implemented by this type of facility layout (Satoğlu et al., 2010). Due to high capital requirements when installing or redesigning a line, its configuration planning is of great relevance for practitioners. Cheng et al., (2000) proposed the following factors that enhanced the wider acceptance of U-shaped lines: • U-shaped line is preferred to a straight line because of its volume flexibility. By increasing or decreasing the number of operators on the line, a company can adjust the production rate as required. This level of volume flexibility is harder to obtain with a straight line. Besides, since walking distance is shorter in a U-shaped than on a straight line, it is easier for an operator to oversee several workstations. • Another advantage of U-shaped line is that the number of workstations required is never more than that required by a straight line (Scholl and Klein, 1999). There are more possibilities for grouping tasks into workstations on a U-line. Moreover, a U-line eliminates the need for special material-handling equipment such as conveyors and other special material-handling operators that are necessary in straight line. Instead, production operators move products from machine to machine. • Moreover, U-shaped lines offer organizational and social advantages. The operators are expected to become multi-skilled and they are able to manage several tasks, which provides job-enrichment. This prevents the daily activities of the operators from becoming routine. Since the operators can see the end product, they are motivated to achieve a higher quality level (Scholl and Klein, 1999). Moreover, a better visibility, communication and teamwork can be achieved by means of the U-shaped lines. This facilitates a sense of belonging, and increases responsibility and ownership compared to a straight line. For solving the UALBP, Miltenburg and Wijngaard (1994) employed a dynamic programming formulation to solve small problems with up to 11 tasks and proposed a heuristic to solve larger problems. Urban (1998) presented an integer linear programming formulation to solve small to medium sized U-line balancing problems with up to 45 tasks by using standart mathematical programming software CPLEX. Scholl and Klein (1999) developed a branch and bound procedure called ULINO to solve problems with up to 297 tasks. Becker and Scholl (2006) extended the problem by integrating practical and relevant aspects, like parallel lines or processing alternatives. In spite of these efforts, there is a wide gap between the academic discussion and practical applications (Boysen et al., 2007). An important issue in U-shaped assembly line balancing problem is the consideration of human factors. Since U-shaped lines are concerned with manual assembly operations, human factor plays a major role in production systems. However, there is a limited literature on human factors in line balancing. These are; • Ergonomic aspects such as physical effort of operators and the risks that they face (Choi, 2009; Otto and Scholl, 2011; Xu et al., 2012), • Learning effect (Costa and Miralles, 2009; Toksari et al., 2008; 2010), • Fatigue (Digiesi et al., 2009) and • Workers' skills (Miralles et al., 2007, 2008; Wong et al., 2006). Worker performance must be considered in line balancing, because as a worker becomes more experienced in performing a specific task, in other words his/her cumulative production quantity increases, his/her task time per one piece of product decreases in a non-linear sense. Therefore, task times are not independent from workers' performance. Another fact is, that every worker cannot perform every task at the same processing time. In addition, every worker cannot be able to perform every task in producton systems. These facts can significantly cause actual task times differ from the preassumed standard times. However, most researchers assumed that the time of task is independent from workers performance. In this study, a Nonlinear Integer Programming Model that intends to assign tasks to the operators of a U-shaped assembly line is developed. Thus, the worker performance that is a significant human factor was reflected to the U-shaped Assembly Line Balancing Problem (UALBP). This is a unique aspect of this study. To the best of the author's knowledge, there is no past study that considers simultaneously both minimization number of workstation and optimization of worker assignment while balancing the single model U-shaped assembly lines. The thesis is organized as follows: First, assembly lines and line balancing problem are explained. Then, a detailed literature research is conducted. The proposed mathematical model is explained in section 4 and computational experiments are conducted in section 5. The study is completed with a conclusion, suggestions and further research.
Benzer Tezler
- Zaman yönetimi ve performans değerlendirme arasındaki ilişkinin öz değerleme ile tespit edilmesi: İstanbul ilinde bir araştırma
The relationship between time management and performance evaluation determination of with self-assessment: A research in İstanbul
ARZU ÜNAL
Yüksek Lisans
Türkçe
2019
TurizmBalıkesir ÜniversitesiTurizm İşletmeciliği ve Otelcilik Ana Bilim Dalı
DOÇ. DR. SEDA ŞAHİN
- Performansla ilişkili ücretlendirme ve kamu hastanelerinde uygulanan performansa dayalı ek ödeme sistemine yönelik hekim tutumlarına ilişkin bir araştırma
Performance related pay and a research on attitudes of physicians toward performance based payment system applied in the public hospitals
RIZA DEMİR
- Hastanelerde performans değerleme ve özel hastanelerde performans değerleme çalışmalarına yönelik bir araştırma
Başlık çevirisi yok
NURİ ERKILIÇ
- Ücret yapısının işgören tatmini üzerindeki etkisi
Infuence of wage structure on employee satisfaction
VAHDET SOYLU
- Spor işletmelerindeki yöneticilerin örgütsel stres kaynaklarının incelenmesi
Studying the source of organizational stress for the managers in sport business
CEMİLE NİHAL YURTSEVEN
Yüksek Lisans
Türkçe
2016
Sporİstanbul ÜniversitesiBeden Eğitimi ve Spor Bilimleri Ana Bilim Dalı
DOÇ. DR. BİLGE DONUK