Geri Dön

Analytical modeling of piezo-SMA composite as an actuator and energy harvester

Başlık çevirisi mevcut değil.

  1. Tez No: 400317
  2. Yazar: ONUR CEM NAMLI
  3. Danışmanlar: PROF. MINORU TAYA
  4. Tez Türü: Doktora
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2012
  8. Dil: İngilizce
  9. Üniversite: University of Washington
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 163

Özet

Özet yok.

Özet (Çeviri)

Piezoelectric materials and shape memory alloys (SMAs) are very common materials foractuators and sensors; however their composites as electrical generators are leastexplored, although the use of piezoelectric materials as the mechanical energy harvesteris becoming popular. In this dissertation piezoelectric material and SMA are used asconstituents for an active composite of two types; one is a composite of piezoelectricmaterial and SMA as an actuator and the second one is a composite as a thermal energyharvester. The analytical modeling and experimental study related to Piezo-SMA activecomposites are examined for both cases. Eshelby?s inclusion problems are combined intoa single model to treat the coupled behavior of electro-mechanics inherent in the piezo-SMA composite where the piezo is matrix phase and SMA is filler phase. SMAundergoes phase transformation such as stress-induced martensite transformation andtemperature induced austenite transformation. Basic design and experimental work doneon active composite are discussed in the areas of material characterization andmechanical modeling.

Benzer Tezler

  1. Modeling for vibration analysis of thin non-uniform plates using Heaviside Functions

    Ince düzgünsüz plakaların titreşim analizi için Heaviside Fonksiyonları kullanarak Modelleme

    MEHMET MURAT GÖZÜM

    Doktora

    İngilizce

    İngilizce

    2018

    Makine MühendisliğiKoç Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. FATMA İPEK BAŞDOĞAN

  2. Advanced concepts of piezoelectric patch-based energy harvesting and locally resonant bandgap formation in thin plates

    Pirometredeki piezoelektrik yama tabanlı enerji toplama ve lokal rezonant bandgap oluşumunun ileri kavramları

    AMIRREZA AGHAKHANI

    Doktora

    İngilizce

    İngilizce

    2018

    Makine MühendisliğiKoç Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    Assoc. Prof. Dr. IPEK BASDOGAN

  3. Esnek sistemlerde aktif titreşim kontrolü

    Active vibration control of flexible systems

    ARZUMAN CAN KUTLUCAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesi

    Kontrol ve Otomasyon Mühendisliği Ana Bilim Dalı

    PROF. DR. AFİFE LEYLA GÖREN SÜMER

  4. Finite element modeling of a piezo patch energy harvester and equivalent circuit modeling on a thin plate with AC-DC conversion

    İnce bir plaka ve piezoelektrik yamadan oluşan enerji üretecinin sonlu elemanlar modelinin ve AC-DC dönüşümü içeren eşdeğer devre modelinin oluşturulması

    BUĞRA BAYIK

    Yüksek Lisans

    İngilizce

    İngilizce

    2016

    Makine MühendisliğiKoç Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. FATMA İPEK BAŞDOĞAN

  5. Development and control of an active torsional vibration damper for vehicle powertrains

    Taşıt güç aktarma sistemleri için aktif torsiyonel titreşim damperi geliştirilmesi ve kontrolü

    ALİŞAN YÜCEŞAN

    Doktora

    İngilizce

    İngilizce

    2021

    Mekatronik Mühendisliğiİstanbul Teknik Üniversitesi

    Mekatronik Mühendisliği Ana Bilim Dalı

    PROF. DR. ATA MUGAN