Effect of bucket size on lead time discretization error in multi-level production planning systems
Çok seviyeli üretim planlama sistemlerinde dönem uzunluğunun tedarik zamanı kesiklileştirme hatası üzerine etkisi
- Tez No: 409236
- Danışmanlar: DOÇ. DR. ZEKİ CANER TAŞKIN
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 70
Özet
Özet yok.
Özet (Çeviri)
Production planning systems are models that hold and analyze planning and controlling of physical transformation and transferral processes in production systems. These systems consist of various planning models such as Material Requirements Planning (MRP) and Job Shop Scheduling (JSS). These models generally use a discretized time frame to determine replenishment times of items or starting times of operations. To discretize time frame, planning horizon is divided into time buckets such as shifts, days, weeks or months. Length of time buckets may not be equal to Greatest Common Divisor (GCD) of the lead times, and they are typically larger than GCD of the lead times. This phenomenon results in errors in rounding of the lead times of the items or operations. In this thesis, we propose a mathematical model that can be applied to problems that have an acyclic Bill of Materials (BOM) structure, or precedence relations with minimization of sum of all cumulative errors objective. Hence, we aim to make optimal rounding choices of the lead times that result in less errors for all items and less error fluctuations through item chains. We also develop a constructive heuristic for the optimal rounding problem. These approaches are applicable to MRP-type problems but thay are not applicable for JSS type models since rounding of processing times does not give sucient sequence information for JSS problems. There may occur some ties between starting times of the operations. Thus, we develop a second phase model that consist of a mathematical model and a heuristic. We compare the results of second phase model with JSS model in terms of error introduced and Central Processing Unit (CPU) time of the solutions. Our results show that the model can have good discretization scheme with an acceptable rate of errors for the sake of less CPU times. There is negative correlation between bucket size and solution quality in general.
Benzer Tezler
- Alaşımlı beyaz dökme demirlerin mikroyapı analizi ve aşınma özellikleri
Microstructure analysis and wear properties of alloyed white cost irons
ÖZGÜR AKDEMİR
- User experience and physical space analysis for sustainable campus planning: Case of Yildiz Technical University
Sürdürülebilir kampüs planlaması için kullanıcı deneyimi ve fiziksel mekan analizi: Yıldız Teknik Üniversitesi örneği
GİZEM AYÇA AKSOY
Yüksek Lisans
İngilizce
2019
Şehircilik ve Bölge PlanlamaYıldız Teknik ÜniversitesiŞehir ve Bölge Planlama Ana Bilim Dalı
PROF. DR. BUKET AYŞEGÜL ÖZBAKIR
- Determination of nanotoxicological effects of silver (Ag0) and aluminium (Al0) nanoparticles on microbial community structure in activated sludge
Gümüş (Ag0) ve aluminyum (Al0) nanoparçacıklarının aktif çamurdaki mikrobiyal yapıya olan nanotoksikolojik etkilerinin belirlenmesi
ELİF BUKET PARLAK
Yüksek Lisans
İngilizce
2013
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. İSMAİL KOYUNCU
- Effects of anisotropy and size on the assessment of diggability of Seyitömer Marl for bucket wheel excavator
Döner kepçeli ekskavatörler için kazılabilirlik tayininde anizotropi ve boyut parametrelerinin etkisinin Seyitömer Marn'ında araştırılması
OĞUZ ŞENER KONCAGÜL
Yüksek Lisans
İngilizce
1990
Maden Mühendisliği ve MadencilikOrta Doğu Teknik ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
DOÇ. DR. NACİ BÖLÜKBAŞI
- Yeraltı kömür madenciliğinde alçıtaşlarının yangın barajı malzemesi olarak kullanılabilirliğinin araştırılması
Başlık çevirisi yok
ZEKAİ TUNCEL
Doktora
Türkçe
1997
Maden Mühendisliği ve Madencilikİstanbul Teknik ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
PROF. DR. ERDİL AYVAZOĞLU