Fracture resistance and failure modes of endocrowns constracted with different materials
Başlık çevirisi mevcut değil.
- Tez No: 443809
- Danışmanlar: YRD. DOÇ. DR. FUNDA EROL
- Tez Türü: Yüksek Lisans
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Dental materyaller, Dental porselen, Dental restorasyon, Dental stres analizi, Endodonti, Dental materials, Dental porcelain, Dental restoration, Dental stress analysis, Endodontics
- Yıl: 2016
- Dil: İngilizce
- Üniversite: Yeni Yüzyıl Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Abstract Purpose: The purpose of this in vitro study is to compare the fracture resistance and modes of fracture or failure between different endocrown restoration materials as lithium disilicate ceramic (IPS e max press) and indirect composites (Solidex &Gradia) performed for endodontically treated mandibular molars. Materials and Methods: Forty sound human mandibular first molars (N =40, n = 10 per group) were selected and randomly divided into four groups.Group1was left intact (control). Group 2 endodontically treated teeth (ETT) restored with endocrown made of lithium disilicate ceramic (IPS e.max press, Ivoclar Vivadent, Schaan, Liech-tenstein). Group 3: ETT restored with endocrown made of Solidex indirect composite (Shofu inc. Japan) Group 4: ETT restored with endocrown made of Gradia indirect composite (GC Corporation, Japan).Fracture resistance (N) was measured using a universal testing machine. Load was applied parallel to the long axis of tooth till failure. Fractures or failures were divided into two groups repairable (favorable) and irrepairable (unfavorable). The mean loads of fracture of each group were statistically compared using ANOVA p<0.001. Results: The mean fracture strength (N) of IPS e.max group had significantly higher mean fracture resistance value (3320±961) when compared to Solidex (2222±938) and Gradia (2366±420) indirect composite groups. There was no significant difference between mean fracture resistance of Solidex composite and Gradia composite groups. As regard to failure modes the results showed that 80% of the Solidex composite groups exhibited repairable failure, also that 60% of Gradia composite groups exhibited repairable and only 10% of IPS e.max press group exhibited repairable failure. Conclusions: The lithium disilicate ceramics endocrowns exhibited higher fracture resistance when compared to indirect composite endocrowns. Indirect composite endocrowns exhibited more repairable failure mode when compared to lithium disilicate ceramics endocrowns.
Benzer Tezler
- Comparison of butt-joint endocrowns and ferrule prepared endocrowns constructed with different CAD/CAM materials in terms of fracture strength and failure mode, an in vitro study
Farklı CAD/CAM materyallerden butt-joint ve ferrül preparasıonu ile hazırlanmış endokronların kırılma dayanımı ve kırılma tipi açısından karşılaştırılması
MOHAMED A A ALTIER
Doktora
İngilizce
2021
Diş HekimliğiYeditepe ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. TEMEL KÖKSAL
- Üç boyutlu yazıcıyla ve farklı bilgisayar destekli tasarım ve üretim (CAD-CAM) bloklardan üretilen endokronların kırılma dayanımlarının karşılaştırılması
Comparison of the fracture resistance of endocrowns fabricated using three-dimensional printing and various computer-aided design and manufacturing (CAD-CAM) blocks
KÜBRA NUR HEKİMOĞLU
Diş Hekimliği Uzmanlık
Türkçe
2025
Diş HekimliğiErciyes ÜniversitesiEndodonti Ana Bilim Dalı
DOÇ. DR. SALİH DÜZGÜN
- Açık apeksli üst çene ön dişlerde revitalizasyon tedavisi sonrası uygulanan indirekt restorasyonların kırılma dayanımı üzerine etkisinin karşılaştırılması: İn-vitro çalışma
Comparison of the effect of indirect restorations on the fracture resistance of open-apex maxillary anterior teeth following revitalization therapy: An in-vitro study
ALPEREN FAHRİ KEREMİT
Diş Hekimliği Uzmanlık
Türkçe
2025
Diş HekimliğiEge ÜniversitesiEndodonti Ana Bilim Dalı
DOÇ. DR. BURCU ŞEREFOĞLU POLAT
- C şekilli kök kanal yapısına sahip 3 boyutlu model dişlere uygulanan farklı restorasyon tekniklerinin kırılma dayanımlarının değerlendirilmesi
Evaluation of fracture strengths of different restoration techniques on 3d teeth replicas with c shaped root canal structure
MELİS SILA ÇETİN
Diş Hekimliği Uzmanlık
Türkçe
2019
Diş Hekimliğiİnönü ÜniversitesiEndodonti Ana Bilim Dalı
DOÇ. NESLİHAN ŞİMŞEK
- Comparison of different dental implant thread shapes in terms of fracture strength and failure mode under static load
Farklı yiv şekilli dental implantların statik yükleme altında kırılma dayanımı ve başarısızlık şekillerinin karşılaştırılması
FAISAL R A AL ABEIDI
Doktora
İngilizce
2021
Diş HekimliğiYeditepe ÜniversitesiAğız, Diş ve Çene Cerrahisi Ana Bilim Dalı
DOÇ. DR. EDİZ DENİZ