Geri Dön

The effects of five repair systems on shear bond strength between composite and two different infra structures after thermocycling

Başlık çevirisi mevcut değil.

  1. Tez No: 443810
  2. Yazar: SIRAGEDDIN MOHAMED AMER AL-HMADI
  3. Danışmanlar: YRD. DOÇ. DR. FUNDA EROL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2016
  8. Dil: İngilizce
  9. Üniversite: Yeni Yüzyıl Üniversitesi
  10. Enstitü: Sağlık Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 108

Özet

Özet yok.

Özet (Çeviri)

Abstract: Purpose: The purpose of this in vitro study was to evaluate the effect of five ceramic repair systems on shear bond strength between composite and two infrastructures (zirconia and nickle chromium alloy) and to determine the mode of bond failure after thermocycling. Materials and Methods: Disc-like specimens (N=100) were made of two dental ceramic infrastructure materials (zirconia, nickle chromium alloy). All the specimens were polished with silicon carbide paper, prepared for bonding by surface modification with airborne particle abrasion. Each infrastructure groups were divided into five subgroups (n=10). They were bonded using five repair systems: 1. Bisco intraoral repair kit, 2. Clearfil repair system, 3. Ceramic repair system(ivoclar), 4. Ultradent ceramic repair system and 5. single bond adhesive. All specimens were repaired with hybrid composite. Bonded specimens were stored in 37°C distilled water for 24 h and were thermocycled at 5–55°C for 1200 cycles with a 30-sec dwell time and 5-sec transfer time. Shear bond strengths were determined with a mechanical testing device. And mode of failure was recorded for each group. Results: Infrastructure groups displayed the following values in megapascals: Zr (clearfil) =18,61±5,37, Zr (bisco) = 18,91±4.33, Zr (ultradent)= 6,63±1,5. Zr (ivocar) = 15,24±5,30, Zr(singlebond)=3,63±0,62, N-Cr(clearfil)=17,37±4,46, Ni- Cr(bisco)= 20,93±,2,63Ni-Cr(ultradent)=8,17±2,48, Ni-Cr (ivocar)= 17,37±4,46, Ni-Cr (single bond )= 10,33±3,55. Every repair system have no significant difference on repairing both Zr and Ni-Cr except single bond. Single bond was weekest for repairing Zr samples. The three repair systems (ivoclar, clearfil and bisco) had both mixed and adhesive failures. For single bond and ultradent groups all the spicemens were failed adhesively. The mode of failure result also supports that the three repair systems (ivoclar, clearfil and bisco) were better than single bond and ultradent repair systems. Conclusion: The three repair systems (ivoclar, clearfil and bisco) were more effective than the other two systems for repairing both infrastructures and their mode of failures were both mixed and adhesive.

Benzer Tezler

  1. In-vitro evaluation of the effect of two surface treatment techniques and three adhesive systems on the shear bond strength of aged composite resin repair

    İki değişik yüzey hazırlığı ve üç farklı adeziv sistem uygulamasının yaşlandırılmış kompozitlerde yapılan tamir işleminin makas kuvvetlere karşı dayanımının in vitro incelenmesi

    AML AL MAGTOF MOHAMED SHABAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2018

    Diş HekimliğiYeditepe Üniversitesi

    Restoratif Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. ALİ KAĞAN GÖKÇE

  2. Effect of using different bonding systems on shear bond strength of a repair composite to a feldspathic ceremic

    Farklı yapıştırma sistemlerinin kullanılmasının bir tamir kompozitinin feldspatikseramiklere kayma dayanımı üzerindeki etkisi

    SEYED ESMAEİL POURABBAS KİADEEİ

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Diş HekimliğiMarmara Üniversitesi

    Diş Hastalıkları ve Tedavisi Ana Bilim Dalı

    DOÇ. DR. RİFAT GÖZNELİ

  3. 15 katlı betonarme bir yapının projelendirilmesi

    The design of 15 storey reinforced concrete building

    CEMALETTİN ERBAŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    1997

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. HALİT DEMİR

  4. Betonarme yüksek yapılarda sönümleyici bağ kirişleri

    Damper coupling beams in hige rise reinforced concrete structures

    SERHAN ALTUN

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Deprem Mühendisliğiİstanbul Teknik Üniversitesi

    Deprem Mühendisliği Ana Bilim Dalı

    PROF. DR. İHSAN ENGİN BAL

  5. Betonarme binalarda zemin kat yüksekliğinin farklı olması durumunda dolgu duvarların etkisinin incelenmesi

    The effect of infill walls in reinforced concrete buildings with different ground floor heights

    ÖZGE ATEŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. TÜLAY AKSU ÖZKUL