Geri Dön

Patlayıcı maddeler ile basamak kazı tasarımı parametrelerinin incelenmesi ve patos uzman sisteminin denenmesi

Researching for bench blasting desing parameters and testing the 'potas' expert system

  1. Tez No: 46619
  2. Yazar: ORHAN COŞKUN
  3. Danışmanlar: PROF.DR. ERKİN NASUF
  4. Tez Türü: Yüksek Lisans
  5. Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1995
  8. Dil: Türkçe
  9. Üniversite: İstanbul Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 97

Özet

DZET Madencilik ' de üretimin başlangıç noktası olan patlatma ekonomiklik ile çok yakından ilgilidir. Ekonomiklik ve verimi yükseltmek için daha mükemmel tasarımlara ulaşmak maksadıyla bir çok araştırma yapılmış, teoriler geliştirilmiştir. Bu tez çalışması kapsamında öncelikle patlatma tasarımı için geliştirilmiş çeşitli teoriler anlatılmış, tasarımda kullanılan parametreler incelenmiştir. Daha sonra yeni bir bilgisayar yazılımı olan Uzman Sistemler ve özellikleri anlatılmıştır. Son aşamada ise patlatma tasarımı amacıyla geliştirilmiş PATAS isimli uzman sistem tanıtılarak denemesi yapılmış ve pratik olarak kullanılabilirliği araştırılmıştır. vııı

Özet (Çeviri)

RESEARCHING FDR BENCH BLASTING DESING PARAMETERS AND TESTING THE“PATAS”EXPERT SYSTEM SUMMARY The use of explosives for rock blasting began in 1627 in the gold mines of Hungary with black powder. The use of black powder to break rock was much faster and more efficient than the traditional methods of firs setting which had been used before that time. Blasting has become an accepted technique for rock fragmentation worldwide. Most mining and construction operations use blasting. The feasibility and economy of many types of mining ventures and costruction projects depend the use of explosives. The blasting industry is rapidly chancing with new theories, products and techniques. Many blasting procedures and technique have been proposed since blasting began. This thesis concentrates on surface blast design. When blasting first began, there was little known about the side effect of blasting. Now, explosive users want to break rock safely, efficiently and economically with the minimum amount of air blast,ground vibration and violence. Many theories have been proposed as to how and why rock breaks as a result of an explosion. Two seperate and distinct mechanism occur. The explosion first induces a stress wave, which is compressional wave, into the rock surrounding the charge, IXExpert systems salve problems that are normally solved by human“experts”To solve expert-level problems, expert systems need access to substantial domain knowledge base, which must be built as efficiently as possible. Expert systems also need to exploit one or more reasoning mechanism to apply their knowledge to the problems they are given. Then they need a mechanism for explaining what they have done to users who rely on them, Expert systems are being used in a wide variety of applications including diagnosis, planning, forecasting, design, interpretation, control, status, monitoring and instruction. In third chapter, the history of Expert systems, basic concepts of expert systems, the structure of expert systems, types of expert systems, advantage and disadvantage of expert systems, how expert systems work, which problems can solve with expert systems are tried to be explain. At the end of the third chapter some expert system application had been introduced which are used in mining industry. Knowledge is very important for expert systems. Because they use knowledge for solving problems. Know ledge base shows the power of the expert systems. So knowledge acquisition is most important for the expert system. In fourth chapter methods and ways of knowledge acquisition had been explained. At the end of this part the research of knowledge acquisation had been discussed. One of the most important knowledge acquisation method was searching the application of bench blasting in Turkey. For this reason a special question sheets had prepared and sent to the mines which uses blasting techniques. XIExpert systems salve problems that are normally solved by human“experts”To solve expert-level problems, expert systems need access to substantial domain knowledge base, which must be built as efficiently as possible. Expert systems also need to exploit one or more reasoning mechanism to apply their knowledge to the problems they are given. Then they need a mechanism for explaining what they have done to users who rely on them, Expert systems are being used in a wide variety of applications including diagnosis, planning, forecasting, design, interpretation, control, status, monitoring and instruction. In third chapter, the history of Expert systems, basic concepts of expert systems, the structure of expert systems, types of expert systems, advantage and disadvantage of expert systems, how expert systems work, which problems can solve with expert systems are tried to be explain. At the end of the third chapter some expert system application had been introduced which are used in mining industry. Knowledge is very important for expert systems. Because they use knowledge for solving problems. Know ledge base shows the power of the expert systems. So knowledge acquisition is most important for the expert system. In fourth chapter methods and ways of knowledge acquisition had been explained. At the end of this part the research of knowledge acquisation had been discussed. One of the most important knowledge acquisation method was searching the application of bench blasting in Turkey. For this reason a special question sheets had prepared and sent to the mines which uses blasting techniques. XIAt the end of the thesis, it has discussed that the“PATAS”could use in mining industry. Blasting theory is perhaps one of the most inte resting thought- provoking, challenging and cantrol- versial areas of mining industry. It encompasses many areas in the science of chemistry, physics, thermodynamics, shock wave interaction and rock mechanics. In broad terms, rock breakage by explasives involves the action of an explosive and the response of the surrounding rock mass within the realms of energy, time and mass. In spite of the tremendous amount of research conducted in the last few decades, no single blasting theory has been developed and accepted that adequately explains the mechanisms of rock breakage in all blasting conditions and material types. There is as yet no consistent and widely appli cable theory of blasting. But the porpose of the science is find the new, reach the excellent. This thesis prepared for this reason. X11XExpert systems salve problems that are normally solved by human“experts”To solve expert-level problems, expert systems need access to substantial domain knowledge base, which must be built as efficiently as possible. Expert systems also need to exploit one or more reasoning mechanism to apply their knowledge to the problems they are given. Then they need a mechanism for explaining what they have done to users who rely on them, Expert systems are being used in a wide variety of applications including diagnosis, planning, forecasting, design, interpretation, control, status, monitoring and instruction. In third chapter, the history of Expert systems, basic concepts of expert systems, the structure of expert systems, types of expert systems, advantage and disadvantage of expert systems, how expert systems work, which problems can solve with expert systems are tried to be explain. At the end of the third chapter some expert system application had been introduced which are used in mining industry. Knowledge is very important for expert systems. Because they use knowledge for solving problems. Know ledge base shows the power of the expert systems. So knowledge acquisition is most important for the expert system. In fourth chapter methods and ways of knowledge acquisition had been explained. At the end of this part the research of knowledge acquisation had been discussed. One of the most important knowledge acquisation method was searching the application of bench blasting in Turkey. For this reason a special question sheets had prepared and sent to the mines which uses blasting techniques. XI

Benzer Tezler

  1. Sınıf 1 tip patlayıcı maddelerin taşınmasında ve depolanmasında emniyet uygulamaları ve patlama etki alanlarının analizi

    Safety applications in the trasportation and storage of class 1 type explosive materials and analysis of explosion impact areas

    BURHAN IRGAT

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Mühendislik BilimleriÜsküdar Üniversitesi

    İş Sağlığı ve Güvenliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ RÜŞTÜ UÇAN

  2. Sivil patlayıcı maddelerle çalışmalarda riskler ve risklerin değerlendirilmesi

    Risks and risk assessment in working with civilian explosives

    ÖZGE GÜLER

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Maden Mühendisliği ve MadencilikDokuz Eylül Üniversitesi

    İş Sağlığı ve Güvenliği Ana Bilim Dalı

    DOÇ. DR. METE KUN

  3. Eti Maden Kırka Sarıkaya ocağında patlatma kaynaklı parçalanmanın değerlendirilmesi ve çok sıralı patlatma tasarımı

    Evaluation of rock fragmentation by blasting and designing multi-row blats for Eti mining Kırka Sarıkaya mine

    ENVER FERAH

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Maden Mühendisliği ve Madencilikİstanbul Teknik Üniversitesi

    Maden Mühendisliği Ana Bilim Dalı

    DOÇ. DR. TÜRKER HÜDAVERDİ

  4. Büyükşehirlerde yangın risk değerlendirmesi: Sakarya ili örneği

    Fire risk assesment in metropolitan cities: Sample of Sakarya province

    YAVUZ BALCI

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Mühendislik BilimleriSakarya Üniversitesi

    Yangın ve Yangın Güvenliği Anabilim Dalı

    PROF. DR. HÜSEYİN ALTUNDAĞ

  5. Azit ve nitro grubu içeren organik patlayıcı maddelerin termal analiz yöntemleri ile incelenmesi ve yüksek basınçlı sıvı kromatografisi kullanarak analiz olanaklarının araştırılması

    Thermal analysis of azido and nitro group containing organic explosives and investigating the possibility of analysis using high pressure liquid chromatography

    NİLGÜN ŞEN

    Doktora

    Türkçe

    Türkçe

    2013

    Adli TıpAnkara Üniversitesi

    Disiplinlerarası Adli Bilimler Ana Bilim Dalı

    PROF. DR. ORHAN ATAKOL