Geri Dön

Elektrokimyasal kapasitör uygulamaları için metal oksitlerle modifiye edilmiş elektropolimerlerin hazırlanması

Preparation of electropolymers modified metal oxides for electrochemical capacitor applications

  1. Tez No: 478291
  2. Yazar: FİLİZ ŞAHİN
  3. Danışmanlar: PROF. DR. GÜLTEN ATUN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2017
  8. Dil: Türkçe
  9. Üniversite: İstanbul Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Fiziksel Kimya Bilim Dalı
  13. Sayfa Sayısı: 96

Özet

Günümüzde teknolojinin gelişmesiyle enerji depolama mekanizmalarının geliştirilmesi önemli bir hale gelmiştir. Enerji depolama aygıtı olarak süperkapasitörler son yıllarda dikkatleri çekmiştir. Süperkapasitörlerin performansı elektrot malzemelerine bağlıdır. Bu çalışmada karbon kumaş üzerine elektropolimerizasyon ile politiyofen kaplanarak CC@PTy elektrodu hazırlanmıştır. CC@PTy elektrodun kapasitif özellikleri incelendiğinde spesifik kapasitansı 11,67 F/g olarak bulunmuştur. CC@PTy elektrot elektrokimyasal yöntemle Co(OH)2, Ni(OH)2 ve Co/Ni(OH)2 kaplanmış ve CC@ PTy@Co(OH)2, CC@ PTy@Ni(OH)2, CC@PTy@Co/Ni(OH)2 elektrotlar elde edilmiştir. Bu elektrotların elektrokimyasal karakterizasyonu 1 M KOH çözeltisi içerisinde CV, galvanostatik şarj-deşarj (GCD) ve elektrokimyasal empedans (EIS) yöntemleri kullanılarak gerçekleştirilmiştir. CC@ PTy@Co(OH)2 elektrodu için spesifik kapasitans 8 mA'de 213 F/g, CC@ PTy@Ni(OH)2 elektrodu için 5 mV/s tarama hızında 857 F/g, CC@PTy@Co/Ni(OH)2 elektrodu için 10 mV/s tarama hızında 500 F/g olarak bulunmuştur. Metal hidroksit kaplı elektrotlar, 450 oC iki saat süreyle kalsine edilerek karşılık olan oksit elektrotlar elde edilmiştir. Bu elektrotların spesifik kapasitansları hesaplanmış, CC@PTy@CoO elektrodun ki 5 mV/s tarama hızında spesifik kapasitansı 2414 F/g, CC@PTy@NiO elektrodun 5 mV/s tarama hızında 743 F/g, CC@PTy@Co/NiO elektrodun 5 mV/s 1335 F/g olarak bulunmuştur. Hidroksit kaplı elektrotlar kalsine edilerek oksitlere dönüştürüldüğünde spesifik kapasitanslarının arttığı görülmüştür.

Özet (Çeviri)

With the development of technology today, the development of energy storage mechanisms has become important. Supercapacitors as energy storage devices have attracted attention in recent years. The performance of supercapacitors depends on the electrode materials. In this study, CC@PTy electrode was prepared by polythiophene coating on the carbon cloth with electropolymerization. The specific capacitance of the CC@PTy electrode was found to be 11.67 F/g as its capacitive properties were examined. CC@PTy electrode was electrochemically coated with Co(OH)2, Ni(OH)2 and Co/Ni(OH)2, CC@PTy@Co(OH)2, CC@PTy@Ni@Co/Ni(OH)2 electrodes were obtained. The electrochemical characterization of these electrodes was carried out using CV, galvanostatic charge-discharge (GCD) and electrochemical impedance (EIS) methods in 1 M KOH solution. The specific capacitance found for CC@PTy@Co(OH)2 electrode is 213 F/g at 8 mA, for CC@PTy@Ni(OH)2 electrode is 857 F/g at a scan rate of 5 mV/s and for CC@PTy@Co/Ni(OH)2 electrode is 500 F/g at a scan rate of 10 mV/s. The hydroxide coated electrodes were calcined at 450 °C for two hours and the corresponding electrodes were obtained. The specific capacitances of the electrodes were estimated as follows; 2414 F/g at 5 mV/s scan rate for CC@PTy@CoO electrode, 743F/g at 5 mV/s scan rate for CC@PTy@NiO electrode, 1335 F/g at 5 mV/s scan rate for CC@PTy@Co/NiO electrode. It was observed that the specific capacitances increased when the the hydroxide coated electrodes converted into their corresponding oxides by calcination.

Benzer Tezler

  1. Fabrication of nickel based electro-active materials with anodic oxidation of different substrates in sub molten koh for supercapacitor applications

    Süper kapasitör uygulamaları için yarı ergiyik koh içerisinde anodik oksidasyon ile nikel esaslı elektroaktif oksitlerin değişik taban malzemeleri üzerinde üretimi ve tanımlanması

    NOURHAN MOHAMED

    Doktora

    İngilizce

    İngilizce

    2022

    Bilim ve Teknolojiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    Prof. Dr. MUSTAFA KAMİL ÜRGEN

  2. Fabrication and characterization of lanthanum manganite based perovskite nanomaterials for electrochemical capacitors

    Elektrokimyasal kapasitörler için lantan manganez oksit esaslı perovskit nanomalzemelerin üretimi ve karakterizasyonu

    ESRA BİNİCİ

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Kimyaİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ NURİ SOLAK

    DR. CEREN YILMAZ AKKAYA

  3. Self-standing graphene papers decorated with metal oxide nanostructures: Preparation and application in electrochemical capacitors

    Metal oksit nanoyapıları ile kaplanmış serbestçe durabilen grafen elektrotlar: Hazırlanması ve elektrokimyasal kapasitörler için uygulamaları

    TUĞÇE BEYAZAY

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    EnerjiKoç Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DOÇ. DR. UĞUR ÜNAL

  4. Syntheses, characterizations, and device fabrications of organic molecules for energy storage devices

    Enerji depolama cihazlarında kullanılmak üzere organik moleküllerin sentezi, karakterizasyonu ve cihaz uygulamaları

    SEBAHAT TOPAL

    Doktora

    İngilizce

    İngilizce

    2022

    Enerjiİstanbul Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. TURAN ÖZTÜRK

  5. Süper kapasitörler için bağlayıcısız nikel içeren grafen köpük elektrotunun tek adımda hazırlanması

    One-step preparation of binder-free nickel containinggraphene foam electrode for supercapacitors

    AZIZ AHMAD KARIMI

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Kimyaİzmir Katip Çelebi Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. ŞERAFETTİN DEMİÇ

    DOÇ. DR. BURAK GÜLTEKİN