Removal of heavy metal ions from aqueous salutions by polymeric resins and activated carbons prepared from agricultural waster
Başlık çevirisi mevcut değil.
- Tez No: 50833
- Danışmanlar: PROF.DR. MİTHAT YÜKSEL
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1996
- Dil: İngilizce
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 107
Özet
IV SUMMARY Removal of heavy metal ions from aqueous solutions by polymeric resins and activated carbons prepared from agricultural wastes was investigated in this study. Activated carbons used in this study are prepared from sunflower, white pine sawdust, resinous pine sawdust and pine cones by using ZnCl2 and NH4CI as a chemical activant. These active carbons exhibited a surface area range of 500-700 mY1. The resins used are Dowex 50W(X8), Dowex 50W(X12), Diphonix[H+], RNH-5, Actinide-Cu, RSPO, Diaion CRP200, Purolite 940 and 950, Cyanex 302 impregnated Amberlite polymeric adsorbents. The model solutions are prepared from analytical grade phosphoric acid. All of the reagents used are analytical grade. Metal analysis are made spectrophotometrically, Varian Plus 10 model atomic absorption spectrophotometer was used for metal analysis. Before the metal sorption tests, the activities of the activated carbon samples were measured according to the methylene blue adsorption method it was seen that materials prepared with ZnCU are more active than those prepared with NH4CI. The activated carbons prepared in this study have been used for batch extraction of Cd(II) from aqueous solution. For this study the materials which exhibit higher activity values were used. From the results it was seen that, the activated carbons prepared by using ZnCl2 as activators showed better results than that of NH4C1. Activated carbons are very hopeful for the removal of heavy metal ions from waste waters. In order to get some information about the relative performance of various chelating resins (RSPO, Diphonix, Actinide, Purolite, Diaion, RNH...) the extraction of various metal ions (Cd, Cu, Cr, V, Zn) was investigated as a function of pH. Kinetic measurements have been performed for cadmium uptake by chelating resins. The results of kinetic measurements for Cd uptake from aqueous solutions showed that the resins also have an ability to remove Cd(II) from aqueous solution with a high capacity. Almost all toxic metals are to be found in phosphate rocks, and thus implicity in fertilizers. The most frequent are Cd, Ni, Pb, Zn, Cu, V, Mn, Mo and Hg. Cd is one of the most toxic metals to the living body. The resins exhibited relatively poor cadmium uptake from phosphoric acid solutions.IV SUMMARY Removal of heavy metal ions from aqueous solutions by polymeric resins and activated carbons prepared from agricultural wastes was investigated in this study. Activated carbons used in this study are prepared from sunflower, white pine sawdust, resinous pine sawdust and pine cones by using ZnCl2 and NH4CI as a chemical activant. These active carbons exhibited a surface area range of 500-700 mY1. The resins used are Dowex 50W(X8), Dowex 50W(X12), Diphonix[H+], RNH-5, Actinide-Cu, RSPO, Diaion CRP200, Purolite 940 and 950, Cyanex 302 impregnated Amberlite polymeric adsorbents. The model solutions are prepared from analytical grade phosphoric acid. All of the reagents used are analytical grade. Metal analysis are made spectrophotometrically, Varian Plus 10 model atomic absorption spectrophotometer was used for metal analysis. Before the metal sorption tests, the activities of the activated carbon samples were measured according to the methylene blue adsorption method it was seen that materials prepared with ZnCU are more active than those prepared with NH4CI. The activated carbons prepared in this study have been used for batch extraction of Cd(II) from aqueous solution. For this study the materials which exhibit higher activity values were used. From the results it was seen that, the activated carbons prepared by using ZnCl2 as activators showed better results than that of NH4C1. Activated carbons are very hopeful for the removal of heavy metal ions from waste waters. In order to get some information about the relative performance of various chelating resins (RSPO, Diphonix, Actinide, Purolite, Diaion, RNH...) the extraction of various metal ions (Cd, Cu, Cr, V, Zn) was investigated as a function of pH. Kinetic measurements have been performed for cadmium uptake by chelating resins. The results of kinetic measurements for Cd uptake from aqueous solutions showed that the resins also have an ability to remove Cd(II) from aqueous solution with a high capacity. Almost all toxic metals are to be found in phosphate rocks, and thus implicity in fertilizers. The most frequent are Cd, Ni, Pb, Zn, Cu, V, Mn, Mo and Hg. Cd is one of the most toxic metals to the living body. The resins exhibited relatively poor cadmium uptake from phosphoric acid solutions.
Özet (Çeviri)
Özet çevirisi mevcut değil.
Benzer Tezler
- N-vinil 2-pirolidon esaslı kopolimerik hidrojeller ile sulu çözeltilerden ağır metal iyonlarının uzaklaştırılması
Removal of heavy metal ions from aqueous solutions by n-vinyl 2- pyrrolidone based copolymeric hydrogels
MÜMİN EVREN
Yüksek Lisans
Türkçe
2012
Kimya Mühendisliğiİstanbul ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. GAMZE GÜÇLÜ
- Preperation of new polymeric sorbents for removal of heavy metal ions from aqueous solutions
Sulu çözeltilerin ağır metal iyonlarının ayrılması için yeni polimerik sorbentlerin hazırlanması
ERDEM YAVUZ
Yüksek Lisans
İngilizce
2005
Bilim ve Teknolojiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
DOÇ. DR. FİLİZ ŞENKAL
- Designing of ion-imprinted cryogels and their use for heavy metal removal
İyon baskılanmış kriyojellerin tasarımı ve ağır metal uzaklaştırması amacıyla kullanımı
MITRA JALILZADEH
- Synthesis and ınvestigation of adsorption properties of mercury-selective urea-functional polymeric resin
Civaya seçimli üre fonksiyonlu polimerik reçinenin sentezlenmesi ve adsorpsiyon özelliklerinin incelenmesi
SİNEM BEKTAŞ
Yüksek Lisans
İngilizce
2021
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. BAHİRE FİLİZ ŞENKAL
- Synthesis of urethane functional polymeric resin and ınvestigation of ıts HeAVY metal sorption properties
Üretan fonksiyonlu polimerik reçinenin sentezlenmesi ve ağir metalleri adsorplama özelliklerinin i̇ncelenmesi
TUĞBA BUĞDAYCI
Yüksek Lisans
İngilizce
2021
Kimyaİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. BAHİRE FİLİZ ŞENKAL