Kompozit sandivic panel üretimi ve üretilen panellerin hasar kriterlerine göre karşılaştırılması
Manufacturing of composite sandwich panel, and comparison of the panels manufactured according to failure criteria
- Tez No: 510070
- Danışmanlar: DR. ÖĞR. ÜYESİ İBRAHİM SAVAŞ DALMIŞ
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: Tekirdağ Namık Kemal Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 58
Özet
Bu çalışmada, sandviç kompozit panellerin eğilme ve basma rijitliğini arttırmak amacıyla farklı çekirdek yapılı kompozit paneller incelenmiştir. Piramit, Konik, Federli-Konik olmak üzere üç tip çekirdek yapısı incelenmiştir. Bu panel yapıları yumurta kutu yapımından esinlenerek tasarlanmıştır. Kompozit paneller vakum infüzyon yöntemi kullanılarak üretilmiştir. Çekirdek ve plaka üretiminde cam elyaf kumaş ve epoksi reçine ve bunları birbirine yapıştırmak için epoksi bazlı yapıştırıcı kullanılmıştır. Üretilen kompozit plakaların eğilme dirençleri birbirlerine çok yakın olmakla birlikte piramit çekirdekli panelin eğilme direnci diğerlerine göre daha yüksek çıkmıştır. Basma testinde ise federli-konik çekirdek yapılı kompozit panelin basma rijitliği ve dayanımı diğer panellere oranla yaklaşık iki kat daha fazladır. Sonlu elemanlar yöntemi kullanılarak üç nokta eğme testi modellenmiştir. Modelde Tsaih hasar kriteri kullanılarak hasar bölgeleri belirlenmiş ve test sonuçları ile karşılaştırılmıştır. Sonuçlar incelendiğinde, model hasar bölgelerini yeterli yakınlıkta bulmuştur.
Özet (Çeviri)
In this study, composite panels with different core structures were investigated to increase the bending and compression stiffness of the panels. Three type of core structures were examined. These were pyramid, conical, and supported-conical. These panels were designed with inspiration from the egg box. Composite panels were produced using vacuum infusion method. Glass fiber fabric and epoxy resin were used to the manufacture cores and the face sheets, and epoxy-based adhesive was used to adhere the core and the facesheets. The bending resistance of the composite panels with different cores was very close to each other, but the bending resistance of the pyramidal core panel was higher than the others. In the compression test, the compressive strength and rigidity of the composite panel with supported conical core structure was about twice that of the other panels. The three-point bend test was modeled using the finite element method. Damage zones were determined using the Tsaih damage criterion in the model and compared with the test results. When the results were examined, the model found the damage areas close enough.
Benzer Tezler
- Damage resistance investigation of different plates subjected to impact loads
Darbe yüküne maruz bırakılmış farklı plakaların hasar dayanımının incelenmesi
MUHAMMET DENİZ
Yüksek Lisans
İngilizce
2021
Havacılık MühendisliğiGaziantep ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
DOÇ. DR. EYÜP YETER
DOÇ. DR. MEHMET HANİFİ DOĞRU
- Sandwich panel production with layered production technology and optimization
Katmanlı üretim teknolojisi ile sandviç panel üretimi ve optimizasyonu
ONUR SELEK
Yüksek Lisans
İngilizce
2022
Makine MühendisliğiAdana Alparslan Türkeş Bilim Ve Teknoloji ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ CEM BOĞA
- Petek yapılı özgün bir kompozit panel üretimi ve bazı mekanik davranışlarının incelenmesi
Manufacturing original composite panels with honeycombed structure and inspecting their mechanical attitudes
REMZİ KAYA
Yüksek Lisans
Türkçe
2009
Makine MühendisliğiErciyes ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. FEHMİ NAİR
- Ahşap sandviç panel ve laminat parke üretiminde nanopartikül kullanımı ve teknolojik özellikler üzerine etkisi
Nanoparticles use in manufacture of wood-based sandwich panels and laminate flooring and its effects on technological properties
ZEKİ CANDAN
Doktora
Türkçe
2012
Mühendislik Bilimleriİstanbul ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. TURGAY AKBULUT
- An experimental and numerical study on the effects of nanoadditives and material extrusion parameters on the mechanical and flexural characteristics of ABS/PVC blend polymer core sandwich panels
ABS/PVC karışık polimer çekirdekli sandviç panellerin mekanik ve eğılme karakteristikleri üzerine nano katkı maddeleri ve malzeme ekstrüzyon parametrelerinin deneysel ve sayısal incelemesi
DENİZ GÜRAY GENCAY
Yüksek Lisans
İngilizce
2023
Makine MühendisliğiAdana Alparslan Türkeş Bilim Ve Teknoloji ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MIRSADEGH SEYEDZAVVAR
PROF. DR. CEM BOĞA