Geri Dön

Farklı yüzey hazırlama işlemlerinin güncel CAD/CAM restoratif materyaller-rezin bağlantı değerlerine etkisinin araştırılması

Effect of different surface treatments on bond strength of novel CAD/CAM restorative materials to resin cement

  1. Tez No: 515527
  2. Yazar: MELTEM BEKTAŞ KÖMÜRCÜOĞLU
  3. Danışmanlar: YRD. DOÇ. CENNET ELÇİN SAĞIRKAYA
  4. Tez Türü: Diş Hekimliği Uzmanlık
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2015
  8. Dil: Türkçe
  9. Üniversite: Ordu Üniversitesi
  10. Enstitü: Diş Hekimliği Fakültesi
  11. Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 132

Özet

Amaç: Güncel CAD/CAM restoratif materyallerinden rezin nano seramik ve interpenetrasyon faz kompozit blokların, lityum disilikat ve feldspatik seramik bloklarla karşılaştırmalı olarak farklı yüzey işlemleri uygulandıktan sonra rezin simanla bağ dayanımının dört nokta eğme testi ile incelenmesi. Gereç ve Yöntem: Çalışmada dört farklı CAD/CAM restoratif materyali kullanıldı (e.max CAD [E], Lava Ultimate [U], Vita Mark II [M], Vita Enamic [V]). Örnekler uygulanacak yüzey işlemine göre 5 gruba ayrıldı (n=10): Gr 1 (kontrol: herhangi bir yüzey işlemi uygulanmadı [C]); Gr 2 (asitle pürüzlendirme [A]); Gr 3 (asit + single bond universal [AS]); Gr 4 (kumlama [K]); Gr 5 (kumlama + single bond universal). Yüzey işlemi uygulanan örnekler rezin simanla (Variolink N) uç uca simante edildi. Daha sonra örneklere bağ dayanımını belirlemek için 4 nokta eğme testi uygulandı. Kırılan örnek yüzeyleri stereomikroskop ve SEM ile incelenerek kırık tipleri belirlendi. Veriler ANOVA ve Tukey testi kullanılarak istatistiksel olarak analiz edildi. Bulgular: Yüzey işlemlerinin ve restoratif materyalin tipinin 4 nokta eğme testi sonucu elde edilen bağ dayanımı değerleri üzerinde anlamlı bir etkisi olduğu belirlendi (p0.05). M materyali için yüzey işlemleri arasında anlamlı bir fark bulunmadı (p>0.05). SEM analizi, yüzey işlemlerinin materyallerin yüzey topografisini modifiye ettiğini gösterdi. Sonuç: Rezin simanın güncel CAD/CAM restoratif materyallere bağ dayanımı materyale ve uygulanan yüzey işlemine bağlı olarak değişmektedir.

Özet (Çeviri)

Aim: To evaluate the effect of different surface treatments on the bond strength of novel CAD/CAM restorative materials; resin nano ceramic and interpenetration phase composite and lithium disilicate and feldspathic ceramic to resin cement by four point bending test. Materials and Methods: Four types of CAD/CAM restorative materials (e.max CAD [E], Lava Ultimate [U], Vita Mark II [M], Vita Enamic [V]) were used. The specimens were divided into five groups in each test according to the surface treatment performed; Gr 1 (control; no treatment [C]; Gr 2 (acid etching [A]); Gr 3 (acid + single bond universal [AS]); Gr 4 (sandblasting [K]); Gr 5 (sandblasting + single bond universal [KS]). A dual curing adhesive resin cement (Variolink N) was applied to each group for testing adhesion using 4 point bending test. Following fracture testing, specimens were examined with a stereomicroscope and SEM to determine to failure type. Data were analyzed using ANOVA and Tukey's test. Results: The surface treatment and type of CAD/CAM restorative material showed a significant effect on the four point bend strength (FPBS) (p0.05). For M material there was no significant differences between the surface treatments (p>0.05). SEM analyses showed that the surface topography of CAD/CAM restorative materials was modified after treatments. Conclusion: The bond strength of novel CAD/CAM restorative materials to resin cement is depend on material and surface treatments.

Benzer Tezler

  1. Güncel CAD/CAM seramik bloklarında farklı yüzey işlemlerinin makaslama bağlanma dayanımına etkisinin incelenmesi

    Evaluation of different surface treatments to shear bond strength on current CAD/CAM blocks

    ONUR ETÖZ

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2015

    Diş HekimliğiOndokuz Mayıs Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. MURAT KURT

  2. Farklı yüzey uygulamalarının ve farklı rezin simanların cad/cam freze tekniği ile üretilen zirkonya post sisteminde retansiyona ve dirence etkilerinin invitro olarak değerlendirilmesi

    Evaluating the effects of different surface treatments and different resin luting agents in the zirconia post system which produced by CAD/CAM copy-milling fabricating techniques for retention and resistance: Invitro study

    DERYA TOPRAK

    Doktora

    Türkçe

    Türkçe

    2011

    Diş HekimliğiDicle Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. ZELAL SEYFİOĞLU POLAT

  3. Farklı yüzey temizleme işlemi uygulanmış güncel termoplastik kaide materyalinin yüzey pürüzlülüğü ve renk değişiminin incelenmesi

    Investigation of surface roughness and color stability of the current thermoplastic denture base material with different surface cleaning process

    ÜMMÜ HABİBE ERDAĞ

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2020

    Diş HekimliğiZonguldak Bülent Ecevit Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DOÇ. DR. ONUR ŞAHİN

  4. Farklı asitlerle yapılan anodik oksidasyon işlemlerinin 2024 ve 7075 alüminyum alaşımlarının korozyon direncine etkisi

    The effect of anodic oxidation treatments with different acids on the corrosion resistance of 2024 and 7075 aluminum alloys

    YUSUF TOLUNAY KOZAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ CEVAT FAHİR ARISOY

  5. Effect of particle morphology on flotation

    Tane morfolojisinin flotasyona olan etkisi

    ONUR GÜVEN

    Doktora

    İngilizce

    İngilizce

    2016

    Maden Mühendisliği ve Madencilikİstanbul Teknik Üniversitesi

    Cevher Hazırlama Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET SABRİ ÇELİK