İyon seçici sol-jel film sentezi ve optik sensör olarak kullanmı
Ion selective sol-gel film synthesis and usage as optical sensor
- Tez No: 517716
- Danışmanlar: PROF. DR. ORHAN GÜNEY
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Kimya Bilim Dalı
- Sayfa Sayısı: 85
Özet
Floresans spektroskopisi ile tayin yapılması, mikromolar seviyenin altındaki konsantrasyonların algılanabilmesi ve analiz kolaylığı nedeniyle kemosensör uygulamaları için etkili bir yöntem sağlamaktadır. Substrat bağlanması sonucunda ışımaları değişen moleküller olan floresans kemosensörler, kimya, biyoloji, farmakoloji ve çevre bilimi gibi birçok farklı alanda yaygın olarak kullanılmaktadır. Floresans özelliğine dayanan bu analiz yöntemi moleküler etkileşimlerin gerçek zamanlı izlenmesi için son derece hassas, ucuz ve basit bir optik yöntem sunar. İdeal bir floresans kemosensörün iki temel özelliğe sahip olması gerekir; ilki, reseptör hedef molekülle en güçlü ilgiye sahip olmalıdır (bağlanma seçiciliği), ikincisi ise, floresans sinyali pH, sıcaklık ve polarite gibi ortam şartlarından etkilenmemelidir (sinyal seçiciliği). Bununla birlikte, seçicilik özelliğinin gerçekleşmesi için hedef metal iyonuna uygun şablon üretilmesi gereklidir. Bu nedenle, floresans kılavuz moleküllerin sensör tasarımlarına dahil edilmesi dikkate değer biçimde araştırılmaktadır. Floresans bir indikatör üretiminden sonraki adım katı bir destek malzeme içine sabitlenmesi ve böylece floresans kemosensörün üretilmesidir. Sabitleme adımı kılavuz molekülün polimer matriks içine kimyasal veya fiziksel olarak bağlanması yoluyla gerçekleşir. İşlevsel bir sensör yaratmak için polimer tuzaklamasından sonra optik fiber cihaz üzerine depolama gerçekleştirilmelidir. Sol-jeller kimyasal sensörler için en yaygın kullanılan destek malzemesidir. Çünkü sol-jeller kolayca küçük parçacık halinde işlenebilir ve optik fiberler üzerine ince film halinde depolanabilmektedir. Toksik ağır metal iyonların tayini için seçici kemosensör geliştirilmesi, bu metallerin endüstriyel uygulamalardaki önemi ve çevreye verdikleri zarar nedeniyle ilgi görmektedir. Metal iyonların tayini için geleneksel olarak atomik absorbsiyon spektrometrisi (AAS), indüktif eşleşmiş plazma atomik emisyon spektrometrisi (ICP-AES), iyon seçici potansiyometre ve X-ışını floresans yöntemi kullanılmaktadır. Ancak bu yöntemler karmaşık numune hazırlama adımları, yüksek cihaz maliyeti ve analizi yapılacak her numune için uygun yöntem belirlenmesi gibi bazı dezavantajlara sahiptir. Bu nedenle, yüksek hassasiyete, iyi bir seçiciliğe, kısa cevap süresine ve gerçek zamanlı izleme özelliklerine sahip, basit floresans tekniğiyle düşük konsantrasyonlarda metal iyonlarının belirlenmesi oldukça önemlidir. Bu tez çalışmasının birinci kısmında; tiyol sübstitüye edilmiş ftalosiyanin molekülünün (ZnPc), farklı etanol-su karışımları içinde absorbsiyon ve floresans spektrumları analiz edildi ve ZnPc için uygun çözelti karışımı belirlendi. Belirlenen optimum çözelti karışımı içinde, metal iyonu varlığında ve yokluğunda farklı pH larda ZnPc'nin absorbsiyon ve floresans spektrumları elde edildi ve analiz için optimum pH değeri belirlendi. Floresans kılavuz olan ZnPc'nin etanol çözeltisi içinde farklı metal iyonları konsantrasyonuna göre floresans spektrumları alındığında, metal iyonu konsantrasyonuna bağlı olarak emisyon şiddetinde azalma olduğu görüldü. Benzer trendlerde sönümlendirme etkisi gösteren ağır metal iyonlarının (Hg2+, Ag+, Pd2+) seçici tayini için, su:etanol karışımı içinde farklı pH'larda metal iyonları titrasyonları yapıldı ve metal tayinini seçici olarak gerçekleştirmek için optimum çözelti koşulları belirlendi. Ayrıca çözelti ortamında ZnPc'nin yeniden kullanılabilmesi için oluşan kompleks yapısını bozucu madde kullanılarak floresans artışı elde edildi. Çalışmanın ikinci kısmında; ZnPc varlığında sol-jel oluşumunu sağlayacak optimum koşullar ve jelleşme süreleri; metal iyonu, farklı katalizör ve sürfaktan etkilerine bağlı olarak belirlendi. ZnPc içeren pre-jel çözeltisinin zamana bağlı floresans ölçümü alınarak jelleşme zamanının ZnPc'nin emisyon şiddetinin artışına bağlı olarak belirlenebileceği görüldü. Sol-jel elde edilmesinde kullanılacak reçetenin belirlenmesinden sonra hazırlanan pre-jel çözeltisi kullanılarak cam plaka üzerine spin kaplama yapıldı ve filmlerin tamamen kondenzasyona uğraması için vakum altında 40 0C de kurutuldu. Film kaplı cam levha kuartz küvet içine diyagonal olarak yerleştirilip farklı metal iyonları ilavesi ile film içinde yer alan ZnPc'nin floresans sinyaline dayalı olarak hedef metal iyonlarına karşı seçici ve hassas algılama özelliği incelendi.
Özet (Çeviri)
Determination by fluorescence spectroscopy is an interesting way to create an effective chemosensor because of its ease of use and sense of concentrations below the micromolar level. Sensing approaches based on the fluorescence property offer high sensitivity, while optical sensing methods are not the only simple way and do not require an expensive assay but also allows for optical determination with the sample to be analyzed on a relatively small scale. However, in order to be able to form the selectivity properties, the technique of template derivation according to the target metal ion is required. Therefore, it is remarkably investigated that fluorescence-guiding molecules, which give chromophore information, are using for sensor designs. Sol-gel is the most common support material for chemical sensors because the sol-gel can easily be processed into small particles and stored as thin films on optical fibers. Sol-gel technology is a chemical synthesis technique used for the production of both glassy and ceramic materials at room temperature. This technology is based on the transition from solution form to solid form. Moreover, heat-resistant inorganic materials have been used for many years as natural raw materials in production processes requiring high temperature. This synthesis technique allows a transition from a colloidal fluid system to a solid gel phase. Sol-gel technology is used to produce a wide variety of ceramic and glass materials such as ultra-fine or spherical powders, thin film coatings, ceramic fibers, microporous inorganic membranes, single-piece or highly porous aerogels. The sol-gel process consists of three main steps: The first step is the hydrolysis and polycondensation of the alkoxide precursor followed by the supercritical drying. The second is the gelation reactions of colloidal particles. In the third step, similar to the second, the colloidal particles are gelled. The only difference is, however, at ambient temperatures in the drying process. The development of selective chemosensors for toxic heavy metal ions due to the importance of their usage in industrial applications and environmental impact is becoming important in recent years. Conventionally, atomic absorption spectrometry (AAS), inductively coupled plasma atomic emission spectrometry (ICP-AES), ion-selective potentiometer and X-ray fluorescence method is used for the detection of metal ions. However, these methods also have some disadvantages, such as complicated sample preparation steps, high equipment cost, and determining the appropriate method for each sample to be analyzed. For this reason, it is very important to determine low concentrations of metal ions by simple fluorescence technique with high sensitivity, good selectivity, short response time and real-time monitoring. Fluorescent chemosensors capable of selectively detecting metal ions in the environment or biological systems were of current interest in supermolecular chemistry because of their high selectivity, sensitivity, and simplicity. In this regard, many research reports have appeared that explored fluorescence chemosensor in the detection and discrimination of transition metal ions owing to their extremely toxic impact on our environment or biological systems. The fluorescent sensor absorbs and emits in the spectral range of visible light, exhibits a reversible response, is widely variable concerning receptor groups, and its optical properties also allow a miniaturization including LED's and photodiodes. The detection of the analyte, metal ions is based on a static quenching of fluorescence upon binding to metal ions. Optical chemosensors have been developed to be a useful tool to sense in vitro and in vivo biologically important species such as metal ions and anions because of the simplicity and high sensitivity of fluorescence assays. A typical fluorescent chemosensor contains a receptor linked to a fluorophore which translates the recognition event into the fluorescence signal. Phthalocyanines (Pcs) was a very important class of compounds, which was discovered by chance in 1907, and whose structure was illuminated in the 1930s. Phthalocyanine is an aromatic macrocyclic compound with the C32H18N8 formula. The phthalocyanine has the ability to bind to more than 70 cations in the periodic table instead of two hydrogen atoms at the center of the macrocyclic compound. For example, metal cations such as Cu (II), Co (II) and Fe (II) are strongly bound to the macrocycle and they have very stable form. The electronic, optical, structural and coordination properties of phthalocyanines and their ability to be modified according to the purpose by modifying the central metal atom or by attaching various substituents have created different application areas. Examples of these applications are semiconductors, gas sensors, pigments, molecular recognition systems, photocatalytic substances and photodynamic therapy (PDT). Otherwise, phthalocyanines are highly versatile and stable chromophores with unique physicochemical properties that make them, alone or in combination with many other functional structures for the construction of molecular materials or electro and photoactive moieties. Therefore, the synthesis of precursors bearing one or more functionality is vital in the preparation of new photoactive phthalocyanines and the design of Pcs linked to strong fluoroprobe moieties appears particularly promising. The immobilization of fluorescence probe into sol-gel silica supports for determination of metal ions has been recently attracted great attention. The porosity of sol-gel matrices allows fluoroprobe to diffuse into the solid support. There are three methods of fluoroprobe immobilization: sol-gel impregnation, covalent binding, and chemical doping. A covalent binding of the phthalocyanine (Pc) sensor on carrier matrices improves the practical use because it enables long-term measurements, avoiding leaching and a possible contamination of the sample under investigation. The sol-gel polymeric material is prepared by a conventional one-pot method with the co-condensation of such Pc-based precursor and the cross-linker, tetramethoxysilane. The advantages of this glassy substrate, compared to hydrogels or polymers, are a wide variability of sol compositions, the formation of very thin films and a relatively simple synthesis of the sols. The sol-gel layers are applied on conventional glass slides by a spin-coating process. These resulting glassy substrates show a good mechanical stability and a transparency for visible light. In this thesis, the physical doping method was used for the immobilization of thiol-substituted phthalocyanine molecule (ZnPc) into sol-gel network. Synthesis involves hydrolysis of tetraethylorthosilicate by a catalyst in the presence of ZnPc. Surfactant, N-LP was added into the sol-gel solution for homogeneous dispersion of ZnPc. In the first part of this study, absorption and fluorescence spectra of ZnPc were analyzed in mixtures of an ethanol-water solution. An optimum solution mixture was determined for ZnPc in which spectral behavior was analyzed. Absorption and fluorescence spectra of ZnPc were obtained at different pH values in the presence and absence of metal ions in predetermined solution mixture. The optimal pH value for analysis was determined by examining the difference in absorbance and emission spectra displayed in the presence and absence of metal ions. Fluorescence emission spectra were obtained according to different metal ion concentrations in 100% ethanol solution while ZnPc was used as a fluorescence probe. Fluorescence quenching was observed depending on the metal ion concentration and similar values in titrations of heavy metal ions such as Hg2+, Ag+, Pd2+ were obtained. Therefore, titration of metal ions was performed at different pH in a mixture of water: ethanol to determine the optimum conditions in order to ensure the selective sensing of metal ions. Furthermore, enhancement in fluorescence of ZnPc was observed upon addition of complex-disrupting substance for reusability of ZnPc in solution. In the second part of a study, the optimum conditions and gelation time in the presence of ZnPc were determined depending on metal ion, different catalyst, and surfactant. It was revealed that gelation times could be determined upon recording the fluorescence emission intensity of pre-gel solution containing ZnPc. The glass plate was spin-coated using pre-gel solution after determination of recipe for the synthesis of sol-gel. The spin-coated glass was dried under vacuum at 40 0C for the condensation of all of the obtained films, and the thickness of the film was determined by using the ellipsometry and found to be 0,9 µm. The addition of different metal ions to the film-coated glass, which was placed diagonally into the quartz tube, resulted in the signal change in fluorescence of ZnPc. The selective and precise detection ability of the film towards metal ion were obtained by means of immobilization of ZnPc in the sol-gel polymeric matrix. In conclusion, we described the complete synthesis and characterization of a new family of peripherally functionalized zinc phthalocyanine bearing (1-hydroxyhexan-3-ylthio)-substituents that could be used as a fluorescent chemosensor. Fluoroprobe, ZnPc exhibits distinct changes in both spectra of absorbance and fluorescence upon titration with metal ions. Q-band absorption peak of ZnPc gradually disappeared in response to treatment with metal ions in solution. Fluorescence emission intensity of ZnPc at longer wavelength region was quenched which indicates the complex formation between metal ions and ZnPc and also showing that metal ions-induced ZnPc aggregation plays a major role in the amplified fluorescence quenching.
Benzer Tezler
- Synthesis and sensor appplication of reusable fluorescent uranyl-imprinted polymer gels
Yeniden kullanılabilir uranil-imprint floresan polimer jellerin sentezi ve sensör olarak kullanılması
ELİF GÖKÇE ATÇAKAN
Yüksek Lisans
İngilizce
2018
Kimyaİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. ORHAN GÜNEY
- Production and characterization of white light based on energy up conversion mechanisms in Yb+3,Nd+3,Tm+3 rare earth ions doped y2o3-sio2 nano-phosphor materials
Yb+3,Nd+3,Tm+3 nadir toprak iyon katkili Y2O3-SiO2 nanofosfor malzemelerde üst enerji̇ dönüşüm mekanizmasına dayalı beyaz ışık üretimi ve karakterizasyonu
HATUN ÇINKAYA YILMAZ
Doktora
İngilizce
2019
Fizik ve Fizik Mühendisliğiİstanbul Teknik ÜniversitesiFizik Mühendisliği Ana Bilim Dalı
PROF. DR. GÖNÜL ERYÜREK
- Hedef kimyasala duyarlı floresan malzemelerin sentezi ve kimyasal sensörlerde kullanımı
Synthesis of fluorescent materials sensitive to target chemicals and usage in chemical sensors
FEHMİ KARAGÖZ
- Engineering M-Si (M:Ag,Cu) thin films as negative electrodes for lithium ion batteries
Lityum iyon bataryalarda negatif elektrot olarak kullanımları için M-Si (M:Ag,Cu) ince filmlerin tasarlanması
BİLLUR DENİZ KARAHAN
Doktora
İngilizce
2016
Enerjiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. ÖZGÜL KELEŞ
- Stimuli responsive supramolecular polymers and ida sensors based on host-guest interaction and ion pair recognition ability of calix[4]pyrroles
Kaliks[4]pirollerin ev sahibi-misafir etkileşimi ve iyon çifti tanıma özelliği üzerine oluşturulmuş, uyaranlara duyarlı supramoleküler polimerler ve ıda sensörleri
SANA AMHARAR
