Birleşik imalatta ortak ve yan mamullerin maliyetlerinin hesaplanması, denetlenmesi ve entegre et tesisinde bir uygulama
Calculating and auditing cost of the joint and by-products in combined production and an application in integrated meat plant
- Tez No: 533279
- Danışmanlar: PROF. DR. GÜRBÜZ GÖKÇEN
- Tez Türü: Yüksek Lisans
- Konular: İşletme, Business Administration
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Sosyal Bilimler Enstitüsü
- Ana Bilim Dalı: İşletme Ana Bilim Dalı
- Bilim Dalı: Muhasebe Denetimi Bilim Dalı
- Sayfa Sayısı: 140
Özet
Dünyanın değişimiyle paralel olarak endüstri sistemleri ve dolayısıyla üretim süreçlerine dair her şey zamanla değişmiştir. Buharlı makinelerin icadıyla başlayan sanayi devrimleri bugünlerde neredeyse insan faktörünü saf dışı edebilecek bir düzeye erişmiştir. Kuşkusuz ki üretim süreçlerinde ve tekniklerinde ortaya çıkan bu değişimler, sürdürülen faaliyetlerde daha verimli olma arzusunun bir sonucudur. İşletmelerin odak noktası olan yüksek kar, rekabet koşulları nedeniyle dikkatleri üretim maliyetlerinin üzerine çekmiş ve düşük maliyetle üretilmiş aynı nitelikteki mamul, işletmelerin rakiplerine karşı elini güçlendirmiştir. Maliyet hususunun bu denli önem arz etmesi, klasik muhasebe anlayışının beklentilere cevap verememesine ve maliyet muhasebesinin ortaya çıkmasına yol açmıştır. Maliyet muhasebesinin en temel amacı olan mamul maliyetlerinin belirlenmesi için birçok farklı teknik geliştirilmiştir. Çoğu işletme için maliyet belirleme süreci basit olsa da üretim tekniği ve yapısı gereği zaruri olarak aynı üretim sürecinde birden fazla mamul elde eden işletmelerde bu maliyet hesaplamaları kolay olmamaktadır. Böylesine bir homojen yapıda her mamul için ayrı ayrı maliyet hesaplaması yapılamayacağı için sorunun çözümü adına birçok farklı maliyet hesaplama tekniği geliştirilmiştir. Her yöntem birleşik imalat yapan tüm işletmelere uymayacağı gibi gerçekte olmayan sonuçlara da ulaştırabilir. Bu nedenle her işletme bu yöntemler arasından kendisine en uygun olan yöntemi seçmeli ve bu doğrultuda hesaplamalarını gerçekleştirmelidir. Bu çalışmada birleşik imalat şeklinde üretim yapan bir entegre et tesisinin verileri kullanılarak çeşitli hesaplama yöntemleri vasıtasıyla mamul maliyetleri hesaplanmış, sonuçları analiz edilmiş ve işletme için en uygun olan yöntem belirlenmeye çalışılmıştır.
Özet (Çeviri)
In parallel with the change of the world, everything about industrial systems and hence production processes has changed over time. Industrial revolutions, which started with the invention of steam engines, have reached a level that can almost eliminate the human factor. Undoubtedly, these changes in production processes and techniques are the result of the desire to be more efficient in the continuing activities. High profit, which is the focal point of the enterprises, attracted attention to production costs due to the competition conditions and the products with the same quality produced at low cost strengthened their hand against the competitors. The importance of cost considerations has led to the classical accounting approach not being able to respond to expectations and the emergence of cost accounting. Many different techniques have been developed to determine the product costs which is the main purpose of cost accounting. Although the costing process for most enterprises is simple, these cost calculations are not easy in enterprises that get more than one product in the same production process due to their production technique and structure. Since the cost calculation can not be made for each product separately due to such a homogeneous structure, many different cost calculation techniques have been developed for the solution of this problem. Each method can not be suitable for the enterprises that makes the combined production, but it can also lead to non-actual results. For this reason, each enterprise should choose the method which is most suitable for it and perform its calculations accordingly. In this study, the product costs are calculated by various calculation methods by using the data of an integrated meat processing plant which have combined manufacturing, the results are analyzed and the most suitable method for the enterprise is tried to be determined.
Benzer Tezler
- Smart city concept and urban planning: Geographical analysis of the smart city index and implications for Turkish context
Akıllı kent kavramı ve kent planlama: Akıllı kent indeksinin coğrafi çözümlemesi ve Türkiye bağlamına ilişkin çıkarsamalar
KABEER SALEH TIJJANI
Yüksek Lisans
İngilizce
2022
Şehircilik ve Bölge PlanlamaMersin ÜniversitesiŞehir ve Bölge Planlama Ana Bilim Dalı
YRD. DOÇ. DR. YASEMİN SARIKAYA LEVENT
- Düz güneş kollektörü verimini etkileyen bazı parametrelerin deneysel incelenmesi
Experimental investigation of some parameters affecting efficiency of solar flat collector
GÜL TAZE
- Birleşik ve yan ürünlerde maliyet hesaplama yöntemlerinin TÜPRAŞ'ta uygulanması
Application of methods of calculation cost of products and by-products in TÜPRAŞ
GÖKHAN BARAL
- Orman ürünleri endüstrisinde birleşik imalat
Başlık çevirisi yok
YAŞAR BİLGİN
Yüksek Lisans
Türkçe
1988
Ormancılık ve Orman Mühendisliğiİstanbul ÜniversitesiMuhasebe Denetim Ana Bilim Dalı
DOÇ. DR. CENGİZ ERDAMAR
- Üç boyutlu yazıcılar ve günümüz mimarisinde kullanımı
Three dimensional printers and their use in today's architecture
MUSTAFA BORA TÜMER