Kesikli zaman maliyet ödünleşim probleminin optimum çözümünün aranması
Optimum solution of discrete time-cost trade-off problem
- Tez No: 535986
- Danışmanlar: DOÇ. DR. ÖNDER HALİS BETTEMİR
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: İnönü Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 89
Özet
İnşaat işlerinin normal süresinde tamamlanması en uygun direkt maliyeti sağlar. Ancak şantiyenin işletilmesi için gerekli olan ve dolaylı maliyet olarak tanımlanan giderler önemli büyüklüklere erişebilir. Oluşturulan ilk iş programında projenin tamamlanma maliyeti olan direkt ve dolaylı maliyetler toplamı elde edilebilecek en düşük düzeyden daha yüksek miktarlarda olabilir. Bazı aktiviteleri belirli bir maliyet artışı ile daha kısa sürede tamamlayıp projenin daha kısa sürede tamamlanması sağlanabilir. Bu sayede direkt maliyetler artarken dolaylı maliyetler azalabilir. Toplam proje maliyetinin azalması ise tasarruf edilen dolaylı maliyet ve sağlanacak dolaylı faydalar miktarının direkt maliyet artış miktarından daha fazla olması ile elde edilebilir. Sonuç olarak bu çalışmada, toplam proje maliyetinin en düşük olacağı iş programını oluşturmayı amaçlayan zaman maliyet ödünleşimi problemine çözümler aranmıştır. Zaman maliyet ödünleşim probleminin yapım alternatiflerini belirlemek önemli ölçüde veri toplama ve derleme işini gerektirir. Kullanılacak ekipman cinsi, ekip sayıları ve yapım tekniği bir aktivitenin tamamlanma süresini ve maliyetini doğrudan etkiler. Tek vinç kullanımı durumunda yani kısıtlı kaynaklar ve sıkışık sürede oluşturulan iş programını hazırlarken yapım alternatiflerini tek tek belirlemek planlama ofisinin iş yükünü önemli ölçüde arttıracağı için inşaat sektörü için uygulanabilir değildir. Bu çalışmada iş programını sistematik biçimde oluşturan bir hesap cetveli geliştirerek her aktivite için farklı tamamlanma sürelerinin ve maliyetinin insan müdahalesi olmadan hesaplanması sağlanmıştır. Çalışmaya konu olan iki problemde de hesap cetveli uygulaması üzerine yazılan makro ve GA'yla optimizasyon yapılarak toplam işçilik giderleri ve genel giderlerinin en düşük düzeyde tutulması sağlanmıştır. Düzenlenen makro kullanıcının optimizasyon ve genetik algoritma üzerinde bilgi sahibi olmasını dahi gerektirmemektedir. Belirlenen alternatifler arasından en düşük toplam proje maliyeti ile işin gerçekleştirilmesini sağlayan iş programı oluşturarak planlama ofisinin iş yükünü önemli ölçüde düşürecek bir araç geliştirilmiştir. Bu çalışma sonucu geliştirilen hesap cetveli uygulamasını kullanacak müteahhitlerin maliyeti en aza indirerek kârlarını en üst düzeye çıkarabilmeleri sağlanmıştır.
Özet (Çeviri)
Completion of construction activities within their normal duration provides the optimum direct cost. However, in this case summation of the necessary expenditures for the operation of the construction site which are defined as overhead cost may reach significant amounts. Therefore in the initial schedule, the sum of the direct and the overhead costs which are considered as total project cost can be higher than the minumum obtainable cost. The project duration can be shortened by crashing some of the activities with an additional increase in the direct cost. This increases the direct cost while decreases the overhead cost. Total project cost decreases when the savings of the overhead cost is higher than the increase of the direct cost. Consequently, obtaining construction schedule which provides the minimum total project cost is defined as time-cost trade-off problem. In this study, discrete time-cost trade-off problem is solved. Determination of construction alternatives for the time-cost trade-off problem requires considerable amount of data collection and editing. Type of equipment to be used, sizes of the crews, and the implemented construction technique directly effects the duration and cost of an activity. While preparing the schedule, the planning department is usually under pressure of time and it is not feasible to determine construction alternatives for every activity which significantly increases the workload of the planning department. In this study, a spreadsheet application is developed which systematically prepares the construction schedule and computes the duration and cost of each activity without human intervention. A macro which implements genetic algorithm is written to minimize the summation of the labor and the overhead costs. The developed macro application does not require any pre-knowledge on the Genetic Algorithm or optimization procedure. Construction schedule which prorites the laeast total construction cost is prepared by the developed tool, this approach decreases the workload of the planning department. The spreadsheet application developed in this study provides the opportunity of maximizing the profits of the contractors by minimizing the total project cost.
Benzer Tezler
- Hybrid particle swarm optimization algorithm for obtaining Pareto front of discrete time-cost trade-off problem
Kesikli zaman-maliyet ödünleşim problemlerinde Pareto eğrisinin melez kuş sürüsü optimizasyon algoritmasi ıle oluşturulmasi
SAMAN AMİNBAKHSH
Yüksek Lisans
İngilizce
2013
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. RIFAT SÖNMEZ
- A mixed integer programming method for Pareto front optimization of discrete time cost trade-off problem
Kesikli zaman maliyet ödünleşim probleminin Pareto front optimizasyonu için doğrusal tamsayılı programlama yöntemi
MERT BİLİR
Yüksek Lisans
İngilizce
2015
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. RİFAT SÖNMEZ
YRD. DOÇ. DR. SABRİ TANKUT ATAN
- The budget constrained discrete time/cost trade-off problem in project networks
Proje ağlarında bütçe kısıtlı kesikli zaman/maliyet ödünleşim problemi
GÜVENÇ DEĞİRMENCİ
Yüksek Lisans
İngilizce
2008
Endüstri ve Endüstri MühendisliğiOrta Doğu Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. MERAL AZİZOĞLU
- Discrete time/cost trade-off problem in project scheduling
Proje çizelgelemesinde kesikli zaman/maliyet ödünleşim problemi
AHMET BAYKAL HAFIZOĞLU
Yüksek Lisans
İngilizce
2007
Endüstri ve Endüstri MühendisliğiOrta Doğu Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. MERAL AZİZOĞLU
- A Constraint programming based transformation approach for a multi-objective and multi-mode resource investment project scheduling problem under fuzzy-stochastic environments
Bulanık-stokastik ortamlarda çok amaçlı ve çok modlu bir kaynak yatırımlı proje çizelgeleme problemi için kısıt programlama tabanlı bir dönüştürme yaklaşımı
GİZEM ÇAKIR
Yüksek Lisans
İngilizce
2021
Endüstri ve Endüstri MühendisliğiDokuz Eylül ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. KEMAL SUBULAN