Geri Dön

Stok değerleme yöntemlerinin mali tablolara etkisi

Effect of stock valuation methods on financial statements

  1. Tez No: 548395
  2. Yazar: ESRA TÜRKKAN ULUDAĞ
  3. Danışmanlar: PROF. DR. RASİM YILMAZ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Ekonomi, İşletme, Economics, Business Administration
  6. Anahtar Kelimeler: Değerleme, Değerleme modelleri, Finansal tablolar, Stok değerleme, Valuation, Valuation models, Financial statements, Stock valuation
  7. Yıl: 2019
  8. Dil: Türkçe
  9. Üniversite: Tekirdağ Namık Kemal Üniversitesi
  10. Enstitü: Sosyal Bilimler Enstitüsü
  11. Ana Bilim Dalı: Çalışma İktisadı Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

İşletmelerin talep-arz dengesi dolayısıyla üretimden satışa kadar olan her aşamasında stoklar oldukça büyük bir önem teşkil etmektedir. İşletmeler stoklarını kayıt altında tutmalı, takip etmeli ve değerlerini tespit etmelidir. Stokların değerlemesinde kullanılan yöntemler incelendiğinde birçok yöntemin mevcut olduğu görülmektedir. Türkiye Muhasebe Standartlarının stoklara ilişkin 2 No'lu standartında ( TMS-2) FİFO ve Ortalama Maliyet yöntemleri kullanılması önerilen yöntemler olarak belirtilmektedir. Diğer yandan literatürde yapılan araştırmalar neticesinde ülkemizdeki farklı sektörlerde faaliyet gösteren işletmelere ait araştırmalarda da en fazla kullanılan stok değerleme yöntemlerinden ilk ikisinin yine FİFO ve Ortalama Maliyet yöntemi olduğu anlaşılmaktadır. Bu nedenle bu çalışmada, değerlemede kullanılan yöntem seçiminin işletmenin mali verileri üzerinde herhangi bir değişime neden olup olmadığı araştırılmıştır. Bu araştırmada iki yöntem örnek H işletmesi üzerinden üç farklı sevkiyat türü için incelenmiş ve karşılaştırılmıştır. İlkinde üretime sevkin stabil olduğu durum, ikincisinde üretime sevkin artan olduğu durum, üçüncüsünde ise üretime sevkin azalan olduğu durum ele alınmıştır. Her üç durum için de Ortalama Maliyet ve FİFO'ya göre sevkiyat başına birim maliyetler, sevkiyat başına toplam maliyetler, dönemdeki toplam maliyetler, satılan malın maliyeti ve dönem sonu stok maliyeti hesaplanmış ve karşılaştırılmıştır. Tüm bu hesaplamalar gerçekleştirilirken ilk madde ve malzeme stokları dikkate alınmıştır. Bu iki yöntemin karşılaştırılmasından yola çıkarak stokların mali tablolara etkisi tartışılmıştır. Ayrıca, mali tablolarda stok ve stok kalemlerini detaylı değerlendirebilmek için imalat sanayii sektöründe faaliyet gösteren Tofaş Türk Otomobil Fabrikası A.Ş firmasının halka arz olmuş mali tabloları incelenerek, çeşitli analiz teknikleri uygulanmıştır.

Özet (Çeviri)

Due to the demand-supply balance of enterprises, stocks are of great importance at every stage from production to sales. Businesses should keep their stocks under record, follow and determine their values. When the methods used in valuation of stocks are examined, it is seen that there are many methods. In the standard 2 of the stocks of Turkey Accounting Standards (TMS-2), FIFO and Average Cost method are stated as recommended methods to be used. On the other hand, as a result of the researches conducted in the literature, it is understood that the first two of the most used stock valuation methods are FİFO and Average Cost method in the researches of enterprises operating in different sectors in our country. Therefore, in this study, it has been investigated whether the choice of method used in the valuation causes any change in the financial data of the enterprise. In this study, these two methods were examined and compared for three different types of shipments by H operation as an example. It was handled that the first case is about stable situation, the second case is about increase situation and the third case is about decrease situation which represent amount of shipment to production. For all three cases, unit cost per shipment, total costs per shipment, total costs per period, cost of goods sold and end-of-period stock cost were calculated and compared according to average cost and FİFO. The first item and material stocks were taken into consideration while performing all these calculations. Based on the comparison of these two methods, the effects of inventories on financial statements are discussed. In addition, in order to evaluate the stock and stock items in the financial statements in detail, IPO financial statements of Tofaş Türk Otomobil Fabrikası A.Ş. that is operating in manufacturing industry were investigated and various analysis techniques were applied.

Benzer Tezler

  1. Kuyruk modelleri ve analizi üzerine bir uygulama

    Başlık çevirisi yok

    DİDEM ÖZPULAT

    Yüksek Lisans

    Türkçe

    Türkçe

    1985

    İstatistikEge Üniversitesi

    Bilgisayar Bilimleri ve Mühendisliği Ana Bilim Dalı

    DOÇ. DR. FİKRET İKİZ

  2. Enez kili ve asitle etkileşmesinin kristal yapı bakımından x-ışını kırınım yöntemi ile incelenmesi

    Başlık çevirisi yok

    NEZİHE ÇALIŞKAN

    Doktora

    Türkçe

    Türkçe

    1986

    Fizik ve Fizik Mühendisliğiİnönü Üniversitesi

    Fizik Ana Bilim Dalı

    PROF. DR. NİZAMETTİN ARMAĞAN

  3. Stok yönetimi ve hastanede bilgisayarla uygulama

    Başlık çevirisi yok

    ZEHRA BAŞKAYA

    Yüksek Lisans

    Türkçe

    Türkçe

    1986

    HastanelerUludağ Üniversitesi
  4. Malzeme istekleri planlaması (MİP)

    Material requirement planning system

    ALİ ÇETİN

    Yüksek Lisans

    Türkçe

    Türkçe

    1985

    İşletmeEge Üniversitesi

    Bilgisayar Bilimleri ve Mühendisliği Ana Bilim Dalı

    DOÇ. DR. M. ÖZEL ERGEN

  5. İncir işletmelerinde açığa çıkan hurda incirlerin tek hücre proteini üretiminde substrat olarak kullanımı

    Başlık çevirisi yok

    HÜLYA OKER

    Yüksek Lisans

    Türkçe

    Türkçe

    1987

    Gıda MühendisliğiEge Üniversitesi

    Gıda Bilimi ve Teknolojisi Ana Bilim Dalı

    DOÇ. DR. MEHMET KARAPINAR