Geri Dön

Prefabrike beton panel sistemlerde tasarım kısıtları

Başlık çevirisi mevcut değil.

  1. Tez No: 55102
  2. Yazar: HATİCE ÜSKÜDAR
  3. Danışmanlar: PROF.DR. ZİYA UTKUTUĞ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Mimarlık, Architecture
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1996
  8. Dil: Türkçe
  9. Üniversite: Gazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 288

Özet

PREFABRİKE BETON PANEL SİSTEMLERDE TASARIM KISITLARI ( Yüksek Lisans Tezi ) Hatice ÜSKÜDAR GAZI ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ EYLÜL 1996 OZ Bu çalışma kapsamında ele alınan araştırmanın konusu prefabrike beton panel sistemlerde tasarım kısıtlarının incelenmesidir. Bu inceleme çerçevesinde giriş bölümünde endüstrileşmiş bina üretiminin, güncel değerler bağlamında maruz kaldığı eleştirilerden bahsedilmiş ve buna yönelik olarak da yapım sistemlerinin değerlendirilmesi gereği vurgulanmıştır. Birinci bölümde mimarlık ve yapımda endüstrileşme üzerine bir açılım getirilmiş, endüstrileşme ilke ve yaklaşımları açıklanarak, yapımda endüstrileşme düzeyi bağlamında yapım sistemleri sınıflandırılmıştır. İkinci bölümde tasarlama olgusu ve endüstrileşmiş sistemlerle tasarlama konulan irdelenerek, tasarım kısıtı kavramı endüstrileşmiş sistemler-geleneksel sistemler ilişkisinde açıklanmıştır. Üçüncü bölümde prefabrike panel sistemlerin ürün ve süreç analizleri yapılarak tasarım kısıtlan incelenmiştir. Sonuç ve tartışma bölümünde ise çalışmanın sonuçları değerlendirilerek tartışılmıştır. BİLİM KODU ANAHTAR SÖZCÜKLER SAYFA SAYISI TEZ YÖNETİCİSİ 601.02.03 Endüstrileşme, tasanm, beton panel sistem 297 Prof.Dr. Ziya Utkutuğ

Özet (Çeviri)

THE DESIGN RESTRICTIONS OF PREFABRICATED CONCRETE PANEL SYSTEMS (M. Sc. Thesis) HATİCE ÜSKÜDAR GAZI UNIVERSITY INSTITUTE OF SCIENCE AND TECHNOLOGY SEPTEMBER 1996 ABSTRACT The aim of this reserch that is undertaken within this thesis is the design restrictions of prefabricated concrete panel system. The introduction consist of the critics about the industrial building production process with in the frame of today's values and also the necessity of evaluating the production systems is emphasized. The view of the first chapter is based on the architecture and the industrialization of construction. In this session the principles approaches of industrialization are explained and also the construction systems are classified with in the frame of industrialization level of construction. In the second chapter the design fact and designing for the industrial systems are the main subjects. The concept of design restriction is explained by the relation of the industrial systems and the conventional systems. In the third chapter the product and the process of the prefabricated panel systems and their design restrictions are analized. At the last session the conclusions of this study are evaluated and discussed. SCIENCE CODE KEY WORDS NUMBER OF PAGES ADVISER 601.02.03 Industrialization, design, concrete panel system 297 Prof.Dr. Ziya Utkutuğ

Benzer Tezler

  1. Prefabrike beton panel sistemlerin süre ve çevrecilik açısından standart betonarme sistemlerine göre irdelenmesi

    Examination of industrial ready-mixed concrete panels in sustainable building manufacturing according to standard reinforced concrete systems in terms of duration and fritters

    OSMAN EMİN CENİK

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Mimarlıkİstanbul Aydın Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. ZÜLKÜF GÜNELİ

  2. Cam lifleri ile güçlendirilmiş alçı (CLGA) panellerden oluşan yarı-prefabrike yapısal bileşenlerin deneysel incelenmesi

    Experimental investigation of semi-prefabricated structural components made of glass fiber reinforced gypsum (GFRG) panels

    BEYZA KAPUCU GÜZELBULUT

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Deprem Mühendisliğiİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. OĞUZ CEM ÇELİK

  3. Beton bünyeli prefabrike panel sistemler ve düğüm noktalarının tasarım sorunları

    Design problems of concrete building prefabricated panel systems and button points

    BEYZA KAHVECİ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Mimarlıkİstanbul Sabahattin Zaim Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. MEHMET OKTAY CANSUN

  4. Deprem bölgelerindeki prefabrike betonarme endüstri binaların yapısal sistemlerinin değerlendirilmesi ve eğimli çatı kirişleri için alternatif tasarımlar

    Overview of structural systems of prefabricated/precast concrete industrial buildings in seismic regions and alternative designs for sloped roof beams

    SELİN KOCA

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. OĞUZ CEM ÇELİK

  5. Prefabrike sanayi yapılarında maliyete etki eden unsurlar

    Factors affecting the cost of precast concrete industrial buildings

    SADIK CAN ARGIN

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. TURGUT ÖZTÜRK