Geri Dön

Spray pyrolyis metodu ile elde edilen Cd1-xInxS filmlerinin bazı fiziksel özelliklerinin incelenmesi

Başlık çevirisi mevcut değil.

  1. Tez No: 56975
  2. Yazar: FERHUNDE İZCİ
  3. Danışmanlar: SALİH KÖSE
  4. Tez Türü: Yüksek Lisans
  5. Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1996
  8. Dil: Türkçe
  9. Üniversite: Eskişehir Osmangazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Fizik Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 59

Özet

ÖZET Spray pyrolysis metodu ile 310±5 °C taban sıcaklığında ve farklı indiyum konsantrasyonlarında kadmiyum indiyum sülfür filimleri elde edilmiş ve filimlerin bazı elektrik ve optik özellikleri ile kristal yapılan incelenmiştir. Elde edilen Cdı.xInxS (0

Özet (Çeviri)

SUMMARY Cadmium indium sulphur films have been produced at 310±5 °C substrate temperature and different indium concentrations by spray pyrolysis method and some electrical and optical properties with crystal structures of these films have been investigated. The thickness of produced Cdi.xInxS films have been measured by using Werth Record 600-2 profile projection device and thickness of films have been obtained between 31-74 um. The current- voltage values of films have been measured by Keithley 176 numerical multimeter and dual standart power supply devices. The current-voltage variation graphics have been drawn by using these measuring results for each materials. However, the current- voltage variation graphics of all the films have been seen to linear. The resistivities of the films have been obtained between O.SSxlO^.SSxlO5 H.cm and the type of the electrical conductivity of all films have been determined to be n-type by using hot probe method. The energy gap of produced films have been found between 2.46-2.78 eV by using optical method. The crystal systems of produced films have been determined as cubic, tetragonal, hexagonal, orthorhombic and monoclinic by means of x-ray spectra. The surface topography of produced films have been taken by using the scanning electron microscope (SEM). Finally, physical properties of produced films have been determined according to the indium concentration which was dopped into the CdS.

Benzer Tezler

  1. Cd1-xZnxS filmlerinin optik ve yapısal özellikleri

    Optical and structural properties of Cd1-xZnxS films

    NİLGÜN ORHAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2006

    Elektrik ve Elektronik MühendisliğiEskişehir Osmangazi Üniversitesi

    Fizik Ana Bilim Dalı

    DOÇ.DR. M. CELALETTİN BAYKUL

  2. Ultrasonik kimyasal püskürtme tekniği ile elde edilen Cd1-XBxS filmlerinin bazı fiziksel ve yüzeysel özelliklerinin incelenmesi

    Cd1-XBxS films obtained by spray pyrolysis technique:Determination of some physical and surface properties

    ELİF CEYLAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Fizik ve Fizik MühendisliğiEskişehir Osmangazi Üniversitesi

    Fizik Ana Bilim Dalı

    YRD. DOÇ. DR. SALİH KÖSE

  3. Kimyasal püskürtme tekniği ile elde edilen kadmiyum gümüş sülfür filmlerinin bazı fiziksel özelliklerinin belirlenmesi

    Determination of some physical properties of cadmium silver sulfide films obtained by spray pyrolysis technique

    GÜLŞAH GÜRBÜZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    EnerjiEskişehir Osmangazi Üniversitesi

    Fizik Ana Bilim Dalı

    YRD. DOÇ. DR. SALİH KÖSE

  4. Spray pyrolysis metodu ile elde edilen CdS'in filmlerinin bazı fiziksel özelliklerinin incelenmesi

    The Investigation of some physical properties of CdS: In films that obtained by spray pyrolysis method

    OSMAN ÖRNEK

    Yüksek Lisans

    Türkçe

    Türkçe

    1996

    Fizik ve Fizik MühendisliğiDumlupınar Üniversitesi

    YRD. DOÇ. DR. SALİH KÖSE