Desing of performance analyzer for radiant heaters and baby incubators based on quality standards
Radyant ısıtıcıların ve bebek kuvözlerinin kalite standartlarına göre performans analizörü tasarımı
- Tez No: 576968
- Danışmanlar: DOÇ. DR. AHMET BİNGÜL
- Tez Türü: Yüksek Lisans
- Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: İngilizce
- Üniversite: Gaziantep Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Atom ve Molekül Fiziği Bilim Dalı
- Sayfa Sayısı: 58
Özet
Radyant ısıtıcı, erken doğmuş bebeklerin ve özellikle de zayıf, dayanıksız yeni doğmuş bebeklerin bulaşıcı hastalıklardan korunması için içine konulduğu, belirli sıcaklığı olan aygıttır.TS EN 60601-2-21 standardına göre üretilmektedir. Erken ve/veya sorunlu doğan bebekler, vücut sıcaklığını kararlı ve gerekli düzeyde tutamadıkları için, sağlık koşullarının kötüleşmesini önlemek amacıyla, steril bir ortamda sabit sıcaklığa; belli bir oranda neme sahip, anti-bakteriyel bir filtreden geçirilmiş taze havaya; uykularının bölünmeyeceği bir sessiz ortama, hemşire bakımına ve doktor gözetimine gereksinim duyarlar. Bu gereksinimi karşılamak üzere bebek kuvözleri üretilirler. Kuvözler TS EN 60601-2-19 standardına göre üretilmektedir. Standartta belirtilen performans testlerinde başarılı olan cihazlar piyasaya sürülmektedir. Ayrıca her ülkede kalite kontrol amacıyla belirli dönemlerde bu testler gerçekleştirilmedir. Piyasada her iki cihazında kalite kontrol amacıyla performans testlerini gerçekleştirecek bir ürün bulunmamaktadır. Bu tez çalışmasında her iki cihazın performans testlerini sağlayacak donanımın teknolojik özellikleri, ölçüm kapasiteleri ve ölçüm doğrulukları incelenmiştir. İncelemeler sonucunda performans testleri için kullanılacak ekipmanın aynı donanım içinde olmasında herhangi bir problemin olmadığı görülmüştür.
Özet (Çeviri)
The radiant heater is a device with a certain temperature at which the premature babies and, in particular, the weak, unstable newborns are placed in order to protect them from infectious diseases. It is produced according to TS EN 60601-2-21 standard. Early and / or troubled infants have a constant temperature in a sterile environment to prevent worsening of their health, as they cannot keep the body temperature stable and necessary; fresh air passed through an anti-bacterial filter having a certain proportion of moisture; they need a quiet environment where their sleep cannot be divided, nursing care and doctor supervision. Baby incubators are produced to meet this requirement. The incubators are manufactured according to TS EN 60601-2-19 standard. The devices specified in the standard which are successful in the performance tests are driven to the market. In addition, these tests are carried out at certain times for quality control purposes in each country. There is no product in the market that will carry out performance tests for quality control on both devices. In this thesis, the technological characteristics, measurement capacities and measurement accuracy of the equipment that will provide performance tests of both devices are examined. As a result of the examinations, it is seen that there is no problem in the equipments used for performance tests in the same equipment. For all measurements, experimental results are compared with the reference (calibrator) values. Results show that sensor values are in good agreement with the expected (calibrated) values.
Benzer Tezler
- Çift katmanlı termal aktif bina sistemi tasarımı, termal analizi ve optimizasyonu
Design, thermal analysis and optimization of double layered thermally activated building system
OĞUZHAN ÇALIŞIR
Doktora
Türkçe
2021
EnerjiErciyes ÜniversitesiEnerji Sistemleri Mühendisliği Ana Bilim Dalı
PROF. DR. GAMZE GENÇ
- Imaging infrared seeker design
Kızılötesi arayıcı başlık tasarımı
AHMET ÜNAL
Yüksek Lisans
İngilizce
2014
Fizik ve Fizik MühendisliğiOrta Doğu Teknik ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. SERHAT ÇAKIR
- Isıtmada enerji ekonomisi ve yaşam dönem maliyeti açısından uygun bina kabuğu ve işletme biçimi seçeneğinin belirlenmesinde kullanılabilecek bir yaklaşım
An Approach for the determination of building envelope and operation period of heating system according to energy conservation and life cycle cost
GÜLTEN MANİOĞLU
- Evaluating the LCA of two buildings with close embodied energy which have different functions
Farklı işlevlere sahip olan iki binanın üç tür duvar kullanarak yaşam döngüsünün değerlendirilmesi
POOYA PAKMEHR
Yüksek Lisans
İngilizce
2014
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
DOÇ. DR. MUSTAFA ERKAN KARAGÜLER