Deney tasarımı yöntemiyle bir esnek poliüretan sünger üretim prosesinin optimizasyonu
Optimization of a flexible polyurethane foam manufacturing process with the experimental design method
- Tez No: 577814
- Danışmanlar: PROF. DR. MİTHAT ZEYDAN
- Tez Türü: Yüksek Lisans
- Konular: Endüstri ve Endüstri Mühendisliği, Industrial and Industrial Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Erciyes Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Endüstri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 73
Özet
Bu çalışmada, Yalın üretim analiz yöntemlerinden biri olan deney tasarımı yöntemi ile bir fabrikada esnek poliüretan sünger üretim prosesinin optimizasyonunu sağlamak amaçlanmıştır. Yalın Altı Sigma DMAIC araçları, bu iyileştirme sürecine yol haritası olması için kullanılmıştır. Sünger üretiminin maliyetli bir üretim olması nedeniyle mümkün olan en kısa zamanda, en az deney sayısı ve deney maliyeti ile hedefe ulaşılmak istenmektedir. Bunun için, bu imkanları sağlayan Taguchi deney tasarımı yöntemi seçilerek deneyler yapılmış ve prosese etki eden dört önemli faktörün (TDI Index, polyol, su ve hava miktarı) optimum konfigürasyonları belirlenmiştir. Yapılan varyans analizi (ANOVA) ile TDI Index ve polyol faktörlerinin kalite karakteristiği üzerinde en etkili faktörler olduğu tespit edilmiştir. Sonrasında yapılan doğrulama deneylerinin %99 güven aralığı içerisinde kalması sonuçların geçerliliğini ve muhtemel tekrarlanabilirliğini gösterir. Sonuç olarak, optimum çözüm sağlanmış, değişkenliğe etki eden sebepler bulunmuş ve sistem, daha verimli değişkenliğe karşı daha az duyarlı hale getirilmiştir. % 8 oranında bir iyileşme gözlenmiştir.
Özet (Çeviri)
In this study, it has been aimed to optimize the flexible polyurethane foam manufacturing process in a factory by using the experimental design method, which is one of the lean production analysis methods. Lean Six Sigma DMAIC tools were used as a roadmap for this improvement process. Since the production of foam is a costly process, we have tried to attain to goal with the minimum number of tests and test costs as soon as possible. For this purpose, the Taguchi test design method has been chosen and the optimum configurations of four important factors (TDI Index, polyol, water and air) have been determined accordingly. Analysis of variance (ANOVA) has revealed that TDI Index and polyol factors are the most effective factors on quality characteristics. The subsequent verification tests within the 99% confidence interval indicate the validity and possible reproducibility of the results. As a result, the optimum solution has been provided, the factors affecting the variability have been found out, and the system is revealed to have made less susceptible to more efficient variability. Thus after the studies, an improvement of 8% has been observed in the end.
Benzer Tezler
- Multiobjective optimization of slabstock polyurethane foam production process
Blok poliüretan sünger üretimi sürecinin çokamaçlı eniyileştirilmesi
NEŞE YILDIZ
Yüksek Lisans
İngilizce
2019
Kimya MühendisliğiEge ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA DEMİRCİOĞLU
- Bitkisel yağ bazlı polyol üretimi ve esnek poliüretan sünger üretiminde kullanılması
Vegetable oil based polyol production and flexible polyurethane foam production made thereform
YASEMİN KAREL
Yüksek Lisans
Türkçe
2010
KimyaAnadolu ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. SÜLEYMAN KAYTAKOGLU
- Bir sünger prosesinin deney tasarımı yöntemiyle optimizasyonu
Foam process optimization with desing of experiment
KHALIDWALEED ALI SHUKURALSRRAF
Yüksek Lisans
Türkçe
2020
Endüstri ve Endüstri MühendisliğiErciyes ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. MİTHAT ZEYDAN
- Yönlendirilmiş enerji biriktirme yöntemiyle 316l üretimi parametre optimizasyonu
Parameter optimization of 316l production with directed energy deposition method
ORKUN TEKELİOĞLU
Yüksek Lisans
Türkçe
2021
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. DERYA DIŞPINAR
- Tasarım sürecinde yaratıcılığı geliştiren bir yaklaşım olarak -mış gibi yapma
Pretense as an approach to enhance creativity in the design process
DERYA GÜRCAN
Doktora
Türkçe
2021
Endüstri Ürünleri Tasarımıİstanbul Teknik ÜniversitesiEndüstriyel Tasarım Ana Bilim Dalı
DR. ÖĞR. ÜYESİ DENİZ LEBLEBİCİ BAŞAR