Geri Dön

Elektronik iletişim ve bilgi işlem sistemlerinde topraklama ve koruma

Grounding and protection in electronic communication and information technology systems

  1. Tez No: 614256
  2. Yazar: ABDURRAHMAN UNCU
  3. Danışmanlar: PROF. DR. MÜSLÜM CENGİZ TAPLAMACIOĞLU
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2019
  8. Dil: Türkçe
  9. Üniversite: Gazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 98

Özet

Elektrik sistemlerinde referans noktası olarak kabul edilen nötr topraklaması elektrik devrelerinde önemli bir kriterdir. Sistemlerde çeşitli sebeplerle oluşan tehlikeli ve zararlı akımları bertaraf etmeyi amaçlayan koruma topraklaması da diğer önemli bir işlemdir. Elektronik ve Haberleşme sistemleri ile Bilgi İşlem Tesisleri'nde oluşan arıza ve hataların sebepleri arasında yeterli etkinlikte yapılmamış topraklama işlemleri önemli bir yer tutmaktadır. Özellikle insanlar ve diğer canlılar için hayati tehlike ve yaralanma riskinin ortadan kaldırılmasına ilaveten elektrikle çalışan tüm sistemlerin düzgün ve kararlı çalışabilmesi ve uzun ömürlü olması için topraklama sistemleri büyük önem taşımaktadır. Mevcut tez çalışmasında,öncelikle topraklama ile ilgili genel tanımlar yapılarak, temel formül ve çalışmalar verilmiştir.Özgül direnç, topraklama elemanlarının yerleştirildiği toprağın cinsi,içindeki kimyasal bileşik ve elementler ile katkı maddelerinin oranlarına göre değişimler incelenmiştir.İlave olarak toprağın sıcaklık,donma durumları ve nem oranı gibi fiziksel şartlarına göre de özgül direncin değişimi topraklama işlemlerindeki önemli unsurlardır.Elektriksel sistem ve tesisatının topraklama dirençlerinin ölçülmesi için literatürde farklı yöntemler mevcuttur.Bunlar,Basit Gerilim Düşümü Metodu (BGDM) ve %62 Metodları yanı sıra, Eğim Metodu, Yıldız-Üçgen (Kesişen Doğru) Metodu ile Dört Nokta Metotları başlıcalarıdır.Topraklama sisteminin elektriksel devre modellemesi ve temelhesapları yapılırken, sistemin iki ana bileşeni olan - toprak elektrodları ve kablolamalar,direnç ve bobin gibi techizatlar etkin değerlendirilmelidir.Toprağın yüksek potansiyel stres altında, dielektrik olarak farklı karakteristik özellik gösterdiği de dikkate alınmalıdır.Mevcut çalışmada bir yıldırım darbesi durumunda, topraklama sisteminin seri L-R akım devre modelinin geçici performansı etüt edilmiştir.Benzer şekilde geçiş darbeleri altındaki topraklama sistemlerinin davranışları, yayılma direnci, endüktans ve kapasitans elemanlarına sahip,sızdırmalı bir iletim hattı gibi modellenmiştir. İlave olarak,Elektronik Haberleşme Sistemlerinde topraklama sistemleri için kusur ve arıza örnekleri analiz edilmiştir.Son bölümde ise topraklama sistem ve devrelerinin matematiksel modeli çıkarılmıştır.

Özet (Çeviri)

In the electrical systems, neutral grounding which is accepted as a reference point is an important criterion in the circuit. Protection grounding which aims to eliminate hazardous and harmful currents which formed from different reasons in the systems is another important transaction. The grounding procedures which have not been made in sufficient efficiency hold an important place between the reasons for the failures and errors which formed in Electronics and Communication Systems and Information Technology (IT) facilities. Especially in addition to eliminating the risk of life-threatening and injury for humans and other animates. For whole electrically operated systems to work properly and stable and for the longevity grounding system has a big importance. In the present thesis study, primarily general definitions are made, and basic formulas and studies about the grounding were given. Resistivity, kind of the soil in which the grounding elements were placed in, and variations according to the proportion of chemical compounds, elements and additives inside it were studied. Additionally, resistivity variations according to the physical conditions of the soil, like temperature, freezing situations and humidity are important criterions in the grounding procedures. There are different methods in the literature for measuring the grounding resistance of Electrical systems and installations. These are, together with the Simple Fall of Potential Method (SFPM) and the 62% Method, the Slope Method, The Star-Delta (intersecting line) Method, and The Four Potential Points Methods are the main ones. As we make the electrical circuit modeling and simple calculations of the grounding system, the two main components of the system - such as ground electrodes and wiring, apparatus like resistance and coil must be evaluated efficacious. It must be taken into consideration that the soil shows characteristic features too as dielectric under high potential stress. In the present study, the case of a lightning strike the earthing system model of the series L-R circuit transient performance was studied. Similarly, modeling of the behavior of the earthing system under the transient impulse was implemented as a leaky transmission line with spreading resistance, inductance and capacitance elements. As an addition, grounding systems in Electronic Communication Systems and examples of defects and malfunctions were analyzed. In the last part mathematical model of the grounding systems and circuits was brought up.

Benzer Tezler

  1. Applications of multi-agent systems in transportation

    Ulaşımda çoklu ajan sistemlerinin uygulamaları

    İLHAN TUNÇ

    Doktora

    İngilizce

    İngilizce

    2023

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik Üniversitesi

    Mekatronik Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET TURAN SÖYLEMEZ

  2. Measurement-based antenna misalignment analysis and angle of arrival estimation for terahertz wireless communication systems

    Kablosuz haberleşme sistemlerinde ölçüm tabanlı hatalı anten hizalaması analizi ve geliş açısı kestirimi

    HASAN NAYİR

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    PROF. DR. GÜNEŞ ZEYNEP KARABULUT KURT

  3. Kablosuz haberleşme için anten tasarımı

    Antenna design for wireless communication

    HEMRAH HIVEHCHI

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Elektrik ve Elektronik Mühendisliğiİstanbul Aydın Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. SAEID KARAMZADEH

  4. Otomatik yineleme istemeli işbirlikli iletimde enerji hasatlama

    Energy harvesting in arq-based cooperative communication

    EMİRHAN ÖZGÜN

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    PROF. DR. HASAN ÜMİT AYGÖLÜ

  5. Cognition-enabling techniques for next-generation radar and electronic warfare systems

    Gelecek nesil radar ve elektronik harp sistemleri için bilişsellik-etkinleştirme teknikleri

    MUHARREM ARIK

    Doktora

    İngilizce

    İngilizce

    2019

    Elektrik ve Elektronik MühendisliğiKoç Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. ÖZGÜR BARIŞ AKAN