Geri Dön

Değişken frekanslı evirgeç tasarımı ve uygulaması

Variable frequency inverter design and application

  1. Tez No: 650393
  2. Yazar: MUHAMMET KARACA
  3. Danışmanlar: DR. ÖĞR. ÜYESİ ALI MAMIZADEH, PROF. DR. NACİ GENÇ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Evirgeç, CSFPWM, VSFPWM, FPGA, THB
  7. Yıl: 2020
  8. Dil: Türkçe
  9. Üniversite: Van Yüzüncü Yıl Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 216

Özet

Farklı frekans ve farklı güç değerlerinde tasarımı gerçekleştirilen evirgeçlerde genellikle sabit anahtarlama frekanslı PWM (CSFPWM) kullanılmaktadır. Evirgeç tasarımlarında tercih edilen anahtarlama frekansı, anahtarlama kayıplarını doğrudan etkilemektedir. Dolayısıyla evirgecin verimini de etkilemektedir. Bu nedenle yüksek frekanslarda tasarlanan ve çalıştırılan evirgeçlerde anahtarlama kayıplarının artmasından dolayı düşük verim elde edilmektedir. Bu tez çalışmasında CSFPWM'ye göre avantajı olan ve literatürde daha önce kullanılmayan değişken anahtarlama frekanslı (VSFPWM) evirgeç tasarımı ve uygulaması gerçekleştirilmiştir. Tez çalışmasında kullanılan VSFPWM yöntemi ile evirgeç çalıştırıldığı zaman CSFPWM'e göre daha az anahtarlama kayıpları olduğu ve devrenin toplam veriminin daha yüksek olduğu gözlemlenmiştir. VSFPWM yönteminde kullanılan anahtarlama aralığı CSFPWM'e göre daha düşük aralıkta seçilmektedir. Evirgecin çıkışında oluşan sinüzoidal gerilim referans alınarak elde edilen VSFPWM metodunda, frekans aralığı dip noktalarda ve sinüzoidal eğrinin üst noktalarına göre farklılık göstermektedir. Benzetim çalışmalarında tasarlanan evirgecin MOSFET güç anahtarı, gerçek uygulamada kullanılan MOSFET güç anahtarı modeli ile aynı model olacak şekilde ANSYS/Simplorer programında bulunan Sheet-Scan modülü ile tanımlanmıştır. Tüm çalışmalarda (benzetim ve deneysel) hem CSFPWM hem de VSFPWM için devrenin kayıp, verim ve THB karşılaştırılması yapılmıştır. Benzetim çalışmalarında MATLAB/Simulink ve ANSYS/Simplorer programlarından yararlanılmıştır. Deneysel çalışmada VSFPWM anahtar tetikleri için FPGA kartı kullanılmıştır. Elde edilen sonuçlardan benzetim ve deneysel sonuçların birbiri ile uyumlu olduğu görülmüş ve önerilen yöntemin (VSFPWM) evirgeç anahtarlaması için daha avantajlı olduğu sonucuna varılmıştır.

Özet (Çeviri)

Inverters designed at different frequencies and different power values are generally used with fixed switching frequency PWM (CSFPWM). The switching frequency preferred in inverter designs directly affects the switching losses. Therefore, it also affects the efficiency of the inverter. For this reason, low efficiency is obtained due to the increase of switching losses in inverters designed and operated at high frequencies. In this thesis, variable switching frequency (VSFPWM) inverter design and application, which has an advantage over CSFPWM and has not been used before in the literature, has been carried out. When the inverter is operated with the VSFPWM method used in the thesis, it has been observed that there are less switching losses compared to CSFPWM and the total efficiency of the circuit is higher. The switching range used in the VSFPWM method is selected at a lower range than CSFPWM. In the VSFPWM method, which is obtained by taking the sinusoidal voltage generated at the output of the inverter as a reference, the frequency range varies according to the bottom points and the upper points of the sinusoidal curve. The MOSFET power switch of the inverter designed in the simulation studies was defined by the Sheet-Scan module in ANSYS / Simplorer program to be the same model as the MOSFET power switch model used in the real application. In all studies (simulation and experimental), loss, efficiency and THD comparison of the circuit for both CSFPWM and VSFPWM has been made. MATLAB / Simulink and ANSYS / Simplorer programs were used in the simulation studies. In the experimental study, FPGA board was used for VSFPWM switch triggers. From the results obtained, it was seen that the simulation and experimental results were compatible with each other and it was concluded that the proposed method (VSFPWM) is more advantageous for inverter switching. Keywords : Inverter, CSFPWM, VSFPWM, FPGA, THD

Benzer Tezler

  1. Modelling and analysis of a wind turbine driven variable speed constant frequency synghronous generator

    Başlık çevirisi yok

    HASSAN ALİ EL-KHATROUSHİ

    Yüksek Lisans

    İngilizce

    İngilizce

    1990

    Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. YILDIRIM ÜÇTUĞ

  2. Modelling, steady-state and transient analysis of the variable speed constant frequency double output induction generator

    Başlık çevirisi yok

    IRAJ ESKANDARZADEH

    Yüksek Lisans

    İngilizce

    İngilizce

    1990

    Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. YILDIRIM ÜÇTUĞ

  3. New algorithms and techniques for microprocessor-controlled PWM induction drives

    Başlık çevirisi yok

    OSMAN KÜKRER

    Doktora

    İngilizce

    İngilizce

    1987

    Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. H. BÜLENT ERTAN

  4. Endüksiyon pişirme sistemleri için yeni bir güç tabanlı kontrol yönteminin uygulanması

    Application of a new power-based control method for induction cooking systems

    ADEM SULAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Elektrik ve Elektronik MühendisliğiVan Yüzüncü Yıl Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ALI MAMIZADEH

    PROF. DR. NACİ GENÇ

  5. A Solar pumping system with maximum power point tracking

    Maksimum güç noktası izlemeli solar pompalama sistemi

    ÜNSAL ORLU

    Yüksek Lisans

    İngilizce

    İngilizce

    1993

    Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik Üniversitesi

    Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı

    PROF. DR. MUAMMER ERMİŞ