Üst çene fiber destekli overdenture protezlerde implant konumlarının etkisinin sonlu elemanlar yöntemiyle değerlendirilmesi
Evaluation of implant positions on maxillar fiber supported overdenture prosthesis with finite element method
- Tez No: 650470
- Danışmanlar: PROF. DR. ÖZGÜL KARACAER
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2018
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 137
Özet
Çalışmamızda, maksillar modele farklı lokasyonlarda (lateral-1.premolar, kanin-2. premolar, 1.premolar-1. molar) yerleştirilmiş implantlar üzerine, farklı alt yapı materyalleri (krom kobalt metal, aramid, cam, karbon ve polietilen fiber) ile oluşturulan overdenture protezlerin implantlar ve implant çevresindeki trabeküler ve kortikal kemik üzerinde oluşturdukları stress değerlerinin ve dağılımlarının üç boyutlu incelenmesi ve karşılaştırılması amaçlandı. Çalışmamızda, 4 adet implantın bilateral olarak 3 farklı lokasyonlarda yerleştirildiği maksillar modeller oluşturuldu, üzerine 5 farklı materyalden overdenture protezler tasarlandı. Maksillar 1. molar diş bölgesinden food stuff yöntemi ile 200N kuvvet uygulandı. Elde edilen sonuçlar üç boyutlu sonlu elemanlar stres analizi ile değerlendirildi. Çalışma sonucunda implantların anterior konuma yerleştirildiği moldelde protez, implant, implant parçaları, kortikal ve trabeküler kemikte oluşan stres değerlerinin daha düşük olduğu gözlendi. Overdenture protezin elastik modülü düşük olan fiberler ile desteklendiği durumda, oluşan streslerin daha yüksek olduğu görüldü.
Özet (Çeviri)
In our study, it was aimed to examine and compare stress values of implants;highest tensile and compressive values, and their distribution in cortical and trabecular bone next to the implant region by using different materials (aramid fiber, glass fiber, polyethylene fiber, carbon fiber and crom cobalt metal) on 4 implants placed in three different locations (lateral-1.premolar, kanin-2.premolar, 1.premolar- 1.molar) on the maxillary crest with finite element analysis method. Three different maxillar models were created in which the implants were placed in different locations. Food stuff was applied to maxillary 1. molar tooth region with 200 N force and three dimensional finite element stress analysis was performed. At the end of the study, in the model where the implants were placed in the anterior; prosthesis, implant, implant parts, cortical and trabecular bone stress values were lower than the models where the implants were placed in the posterior position. In the comparison between the fibers, it was seen that the stress values were higher when the overdenture prosthesis was supported by fibers with low elastic modulus.
Benzer Tezler
- Silikon esaslı maksillofasiyal protez malzemelerinin alt yapı malzemelerine bağlanma özelliklerinin araştırılması
The investigation of the bonding properties of silicone based maxillofacial prosthetic materials to the framework materials
BEGÜM YERCİ KOSOR
Doktora
Türkçe
2015
Diş HekimliğiEge ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. ATİLLA İSMAİL KESERCİOĞLU
- Titanyum ve polieter eter keton (PEEK) subperiosteal çene implantlarının biyomekanik etkilerinin sonlu elemanlar metodu ile incelenmesi
Finite element analysis of the biomechanical effects of titanium and polyether ether ketone (PEEK) subperiosteal jaw implants
SERHAT POLAT
Doktora
Türkçe
2021
Diş HekimliğiBaşkent ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
DOÇ. NUR ALTIPARMAK
- Şeffaf plaklarla mini vida destekli kanin distalizasyonu uygulamalarında uzunluğu ve yapısı farklı kuvvet kollarının etkisinin sonlu elemanlar analizi ile değerlendirilmesi
Evaluation of the effect of different length and structure of force arms in miniscrew assisted canine distalization applications on clear aligner by finite element analysis
AYŞEGÜL İNAN
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiRecep Tayyip Erdoğan ÜniversitesiOrtodonti Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MERVE GONCA
- All-on-four konseptine göre yerleştirilen titanyum implantlar ile desteklenen farklı materyaller ile üretilmiş sabit dental protezlerin fotoelastik ve sonlu elamanlar stres analizleri ile incelenmesi
Investigation of fixed dental prosthesis produced with different materials supported by titanium implants placed according to the all-on-four concept by using photoelastic and finite element stress analysis
AHMET ÇALIŞKAN
Doktora
Türkçe
2019
Diş HekimliğiSelçuk ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. İSA YÖNDEM
- Le fort I ilerletme osteotomi fiksasyonunda titanyum ve karbon fiberle güçlendirilmiş polietereterketon mini plakların stres dağılımlarının sonlu elemanlar analizi ile değerlendirilmesi
Evaluation of stress distributions of titanium and carbon fiber reinforced polyetheretherketone mini plates in Le fort I advancement osteotomy fixation using finite element analysis
KÜBRA YAKUT
Diş Hekimliği Uzmanlık
Türkçe
2024
Diş Hekimliğiİnönü ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SEZAİ ÇİFTÇİ