Geri Dön

Mandibular implant destekli overdenture protezlerde farklı tutucu sistemlerinin stres dağılımına etkisinin sonlu elemanlar analizi ile değerlendirilmesi

Evaluation of different attachment systems on stress distribution for implant supported mandibular overdenture prosthesis using finite element analysis

  1. Tez No: 655770
  2. Yazar: SHIRHAN HALILOV
  3. Danışmanlar: PROF. DR. İSA YÖNDEM
  4. Tez Türü: Doktora
  5. Konular: Diş Hekimliği, Dentistry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2020
  8. Dil: Türkçe
  9. Üniversite: Selçuk Üniversitesi
  10. Enstitü: Sağlık Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 168

Özet

İmplant destekli hareketli protezlere gelen farklı yönlerdeki kuvvetlerden dolayı implant çevresindeki kemikte dikey ve yatay yönde oluşan kemik rezorpsiyonlarından literatürde bahsedilmiştir. Kemiğe iletilen kuvvetler ataşmanlar, implantlar ve mukoza aracılığı ile olmakta olup, ataşman tipinin kemikteki stres dağılımını etkilediği düşünülmektedir. Günümüz diş hekimliğinde bilinen ball, bar, locator, magnet gibi tutucu sistemler ile birlikte yeni üretilen ve sık kullanılan novaloc, CmLoc, L-RTx gibi tutucu sistemler vardır. Ancak hangi ataşman tipinin daha iyi olması ile ilgili literatürde kesin bir fikir yoktur. Yeni bilinen tutucu sistemlerle ilgili literatürde çok az çalışmalar bulunmakta, hatta bu ataşmanların implant ve protetik parçalarda oluşturdukları streslerle ve kemikteki stres dağılımını nasıl etkiledikleri ile ilgili çalışma bulunmamaktadır. Bu bilgiler ışığında, iki implant destekli mandibular overdenture protezlerde ball, bar, locator, novaloc, CmLoc ve L-RTx ataşman sistemlerinin protetik parçalarda, implantlarda ve kemikte oluşturduğu stres dağılımını üç boyutlu sonlu elemanlar stres analizi çalışması ile stres analizi çalışması yapılması planlanmıştır. Anterior ve posteriordan 100N olacak şekilde iki farklı yükleme yapılmıştır. Sonuç olarak, implant ve kemikte en yüksek stresler bar modelinde, en düşük stres değerleri ise L-RTx modelinde görülmüştür.

Özet (Çeviri)

Bone resorption occurring vertically and horizontally around the dental implants due to the forces from different directions to the implant-supported removable dentures has been previously reported in the literature. The forces transmitted to the bone through attachments, implants and mucous membranes. It is thought that the type of the attachment affects stress distribution in the bone. There are many attachment systems such as ball, bar, locator, magnet, which are known in routine dentistry and contemporary systems such as novaloc, CmLoc, L-RTx, which are recently produced and used frequently in modern denistry. Despite decades of research, this continues to be debated which type of attachment is better. There are very few studies in the literature on newly known conservative systems, and no pevious research has investigated how these attachments affect stress distribution not only on implants and prosthetic parts but also in bone. Based on this information, we investigated the stress distribution of two implant-supported mandibular overdenture prostheses using attachments as ball, bar, locator, novaloc, CmLoc and L-RTx in prosthetic parts, implants and bone with three-dimensional finite element stress analysis. In our study, finite element stress analysis method was used. Load of 100 N was applied from the anterior to the posterior. As a result of our investigation, the highest stresses around the implant and bone were observed in the bar model and the lowest stress values in the L-RTx model.

Benzer Tezler

  1. İmplant destekli overdenture protezlerde farklı vertikal uyum dereceleri ve farklı kantilever tasarımlarının implant ve çevresindeki kemikte oluşturduğu stresin değerlendirilmesi: Üç boyutlu sonlu elemanlar analizi

    Evaluation of the stress in the implant and the surrounding bone; from the different vertical misfits on the implant supported overdenture and the different cantilever designs : A three-dimensional finite element analysis

    SÜMEYRA KAYMAK

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2020

    Diş HekimliğiTokat Gaziosmanpaşa Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ KAAN YERLİYURT

  2. Alt çene implant destekli overdenture protezlerde farklı tutucu tiplerinin ve değişik kret yüksekliklerinin implantlarda oluşan strain'e etkisi

    The effect of attachment type and mandibular crest height on the strain induced on implants supporting overdentures

    TUĞGEN MERSİN

    Doktora

    Türkçe

    Türkçe

    2003

    Diş HekimliğiHacettepe Üniversitesi

    Protez Bilim Dalı

    DOÇ. DR. FİGEN DEMİREL

  3. Alt çene tam dişsizlik vakalarında titanyum ve peek implant destekli farklı tutucu ataşmanlara sahip overdenture protezlerin protetik yapılar, implantlar ve çevre dokularında oluşturduğu stres dağılımının sonlu elemanlar stres analizi yöntemiyle değerlendirilmesi

    Evaluation of stress distribution in implant and surrounding tissues of prosthetic structures by means of finite element stres analysis methots of overdenture prostheses with various retaining attachments supported by titanium and implants in the case of lower jaw complete toothlessness

    MUHARREM GÜRLER

    Diş Hekimliği Uzmanlık

    Türkçe

    Türkçe

    2020

    Diş HekimliğiFırat Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ BEKİR EŞER

  4. Mandibular implant destekli hareketli protezlerde implant sayısı ve tutucu türünün kemikteki stres dağılımlarına etkisinin sonlu elemanlar analizi ile incelenmesi

    The evaluation of the effect of number of implants and type of attachment on the stress distribution in bone: a finite element analysis

    ZEYNEP SELDA ARAT

    Doktora

    Türkçe

    Türkçe

    2010

    Diş Hekimliğiİstanbul Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. ÖMER KUTAY

  5. Mandibuler implant tutuculu overdenture uygulamalarında, kısa implantların ve tutucu tiplerinin farklı kemik dansiteleri üzerinde oluşturacağı streslerin üç boyutlu sonlu elemanlar stres analiz yöntemi ile biyomekanik olarak incelenmesi

    Biomechanical investigation of stress caused by short implants and retainer types on different bone densities in mandibular implant retained overdenture applications by THREE-dimensional finite element stress analysis method

    GİZEM KILIÇ

    Doktora

    Türkçe

    Türkçe

    2022

    Diş HekimliğiAnkara Üniversitesi

    Protetik Diş Tedavisi Ana Bilim Dalı

    PROF. DR. SEMİH BERKSUN