Geri Dön

Dört stroklu otto motorunda aşırı doldurma uygulaması ile değişen parametrelerin araştırılması

Searching of the parameters that are chanded by the super changing of the for stroke ottomotor

  1. Tez No: 67836
  2. Yazar: F.ESAT ALTAY
  3. Danışmanlar: PROF. DR. ORHAN DENİZ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1997
  8. Dil: Türkçe
  9. Üniversite: Yıldız Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Enerji Bilim Dalı
  13. Sayfa Sayısı: 131

Özet

TÜRKÇE ÖZET Bu tezin genel amacı, dört stroklu Otto motorunda aşırı doldurma uygulaması ile değişen parametrelerin araştırılmasıdır. Yukarıdaki konunun açıklanabilmesi için ilk bölümde aşırı doldurmanın tanımı yapılıp; uygulama metodlarına ait bilgi ve şekiller verilmiştir. İkinci bölümde, Otto motorlarında aşırı doldurmanın tarihçesi ve ilk uygulamalarına ait şekil ve bilgilere işaret edilmiştir. Üçüncü bölümde, aşırı doldurma için kullanılan kompresörlere ait genel bilgiler ve hesaplama yolları belirtilmiştir. Dördüncü bölümde, aşın doldurma için kullanılan kompresör tipleri ve işletim diyagramları gösterilmiştir. Beşinci bölümde, aşırı doldurmalı iki ve dört stroklu motorun dolgu akışına ait hesaplama yolları ve diyagramlar belirtilmiştir. Altıncı bölümde, aşırı doldurmada kullanılan kompresör ve motor arasındaki etkileşim ve bu konuya ait işletim diyagramları anlatılmaktadır. Yedinci bölümde, aşırı doldurma uygulaması sonucunda artış gösteren termodinamik değerler ifade edilmektedir. Sekizinci, yani son bölümde ise, tabii emişli ve aşırı doldurmalı Otto motorlarına ait teorik performans hesaplamaları ve bu hesaplamalar sonucunda çizilen performans diyagramları bulunmaktadır. Tezin hazırlanışındaki yaklaşımımız, yukarıda basit olarak ifade ettiğimiz bölümler kullanılarak sağlanmaktadır. Sekizinci bölüme kadar metin, formül ve genel hesaplamaları ifade etmek için kullandığımız yöntem ile tezin konusunun açıklanması amaçlanmıştır. Son bolümde ise, kullandığımız yöntem, formül ve hesaplamalardan sonuç çıkarmaya yönelik olmuştur. VI

Özet (Çeviri)

ABSTRACT As the general goal of this thesis, it was aimed to search the parameters that are changed by the supercharging of the four stroke Otto motor. In order to expound the above topic, in the first part, the supercharging was defined and its application methods were expressed by the figures. In the second part, historical background and the figure of the first application of the supercharged Otto motor were given. In the third part, general information and calculation ways of the compressor, which had been employed for the supercharging, were described. In the fourth part, the kinds of compressor and operating diagrams were shown. In the fifth part, calculations and diagrams were explained relating to the fresh mixture of the supercharged two and four stroke Otto motors. In the sixth part, the interaction between compressor and motor and besides their operating diagrams were expressed. In the seventh part, thermodynamic parameters, which are increased by reason of the supercharging, were underlined. In the eighth part, theoretical performance calculations and diagrams, which had been drawn by means of these calculation results, were determined concerning the natural aspirated and supercharged four stroke Otto motor, which are the same model and type. In this thesis, our approach was ensured by the parts that were described the- above paragraph. Up to the eighth part, through our method that was utilized to expound the texts, formulas and general calculations, it was aimed to comprehend the goal of the thesis. In the last (i.e. eighth) part, it was obtained the several results by the used methods, texts and calculations. VII

Benzer Tezler

  1. 50-60 cc'lik dört stroklu otto motorlarınının dizayn ve test koşullarının araştırılması

    A study on desingn paramaters and test procedures of 50-60 cc four strokes si engines

    TARIK İBİŞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2004

    Makine MühendisliğiYıldız Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ORHAN DENİZ

  2. Kullanılmış kızartma yağlarından biyometrinin elde edilmesi ve dizel motorlarında uygulanması

    Başlık çevirisi yok

    KÖKSAL KURUÇAY

    Yüksek Lisans

    Türkçe

    Türkçe

    2004

    EnerjiMarmara Üniversitesi

    Makine Eğitimi Ana Bilim Dalı

    PROF.DR. AHMET KORHAN BİNARK

  3. İçtan yanmalı motorlarda ekserji analizi

    Exergy analysis on interanal combustion engines

    HAKAN ÇALIŞKAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2009

    Makine MühendisliğiEskişehir Osmangazi Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ARİF HEPBAŞLI

    YRD. DOÇ. DR. MUSTAFA ERTUNÇ TAT

  4. Biyodizelin gemi dizel motorlarında alternatif yakıt olarak kullanımının deneysel olarak incelenmesi

    Experimental investigation of biodiesel as an alternative fuel for marine diesel engines

    CENK KAYA

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    DenizcilikYıldız Teknik Üniversitesi

    Gemi İnşaatı ve Gemi Makineleri Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ GÖRKEM KÖKKÜLÜNK

  5. Tütün tohumu yağı metil esterinin dizel motorlarında yakıt olarak kullanılma imkanlarının araştırılması

    The study of the possible usage of tobacco seed oil methyl ester in diesel engine as diesel engine fuel

    HÜLYA KARABAŞ

    Doktora

    Türkçe

    Türkçe

    2009

    Teknik EğitimSakarya Üniversitesi

    Makine Eğitimi Ana Bilim Dalı

    DOÇ. DR. ADNAN PARLAK

    PROF. DR. İBRAHİM ÖZSERT