Osseodensifikasyon tekniği ve geleneksel yöntemle hazırlanan implant sahalarında kemikte meydana gelen değişimlerin ın-vitro değerlendirilmesi
In-vitro evaluation of bone changes in implant fields prepared by osseodensification technique and traditional method
- Tez No: 689073
- Danışmanlar: PROF. DR. METİN GÜNGÖRMÜŞ
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: Türkçe
- Üniversite: Gaziantep Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Ağız Diş ve Çene Cerrahisi Ana Bilim Dalı
- Bilim Dalı: Ağız, Diş, Çene Hastalıkları ve Cerrahisi Bilim Dalı
- Sayfa Sayısı: 89
Özet
Bu tez çalışmasında osseodensifikasyon tekniği ve geleneksel yöntemle hazırlanan implant sahalarında kemikte meydana gelen değişimlerin in-vitro değerlendirilmesi amaçlanmıştır. Çalışmamızda sığır femur kortikal kemikleri kullanılmıştır.kemik bloklar üzerinde osseodensifikasyon tekniği ve geleneksel yöntemle 3.5 mm ve 5.0 mm çapında 9 mm ve 15 mm boylarında implant sahaları hazırlama işlemi için oda sıcaklığında drilleme işlemi yapılmıştır. Yöntem, boy ve çapa göre gruplar oluşturularak kemikte meydana gelen sıcaklık değişimleri incelemek amacıyla 8 adet grup oluşurulmuştur. Her bir grup 30 implant sahasından oluşturulmuştur. Drilleme esnasında kemikte meydana gelen ısıyı değerlendirmek üzere osteotomide kullanılan cerrahi tur motoru, paralelometre cihazına kemik üzerine dik açı ile giriş yapacak şekilde adapte edilerek, taze sığır femur kortikal kemiğinde frezleme işlemi yapılmıştır. Drilleme boyunca oluşan sıcaklık, dril yuvasının sağ ve sol yanlarında 1'er mm mesafede, 9'ar ve 15'er mm derinliklerinde 2 adet k tipi termocouple ısı sensörü yerleştirilerek ölçülmüştür. Her grup için bu işlem 30 kere tekrarlanmış ve drillemelerde yapılan ısı ölçümleri kaydedilmiştir. Kemik bloklar üzerinde osseodensifikasyon tekniği ve geleneksel yöntemle 3.5 mm ve 5.0 mm çapında 9 mm ve 15 mm boylarında implant sahaları hazırlama işlemi için oda sıcaklığında drilleme işlemi yapılmıştır. Yöntem, boy, çap ve implant yiv tasarımına göre gruplar oluşturularak yerleştirilen implantların primer stabilite değerlerini incelemek amacıyla 16 adet grup oluşturulmuştur. Her bir grup 15 implant sahası oluşturulmuş ve implant yerleştirilmiştir. Yerleştirilen implantlarda primer stabiliteyi değerlendirmek üzere osstel cihazı kullanılmıştır. 9 mm ve 15 mm derinliklerinde hazırlanan implant sahalarına agresif ve pasif yapıda implantlar kemik seviyesine kadar manuel olarak yerleştirme anahtarıyla gönderilip osstel cihazı yardımıyla primer stabilite değerleri kaydedilmiştir. Osseodensifikasyon tekniği ve geleneksel yöntemle 3.5 mm ve 5.0 mm çapında 9 mm ve 15 mm boylarında implant sahaları hazırlama işlemi için oda sıcaklığında drilleme işlemi yapılmıştır. Yöntem, boy ve çap göre gruplar oluşturularak implant yuvaları etrafındaki kemik yoğunluğunu incelemek amacıyla 8 adet grup oluşturulmuştur. Her bir grup 30 implant sahasından oluşturulmuştur. İmplant sahaları bilgisayarlı tomografi ile incelenerek sagittal kesitler elde edilmiştir. Elde edilen kesitlerde gözlenen 3 duvarın 0.5 mm2 lik orta noktalarındaki ölçümlerde ortalama değer elde edilerek kaydedilmiştir.Sonuç olarak; sıcaklık deneylerinde hiç bir grupta kemik nekrozu için kritik değer olan 47 ˚c yi geçecek sıcaklık artışı gözlenmemiştir. Drilleme sırasında oluşan en düşük sıcaklık geleneksel teknikle oluşturulan 3.5 mm çapında 9 mm boyunda olan grupta gözlenmiştir en fazla oluşan sıcaklık ise 5.0 mm çapında 15 mm boyunda olan osseodensifikasyon grubunda gözlenmiştir. Primer stabilite deneylerinde ise ölçülen en yüksek primer stabilite yiv tasarımı açısından pasif olarak tasarlanan 5.0 mm çapında ve 15 mm boyunda olan osseodensifikasyon grubunda gözlenmiştir. Kaydedilen en düşük primer stabilite ise yiv tasarımı açısından pasif olarak tasarlanan 3.5 mm çapında ve 9 mm boyunda olan geleneksel teknikle oluşturulan grupta gözlenmiştir. Kemik yoğunluğu ölçüm deneylerinde ise osseodensifikasyon grubu tarafından oluşturulan 5.0 mm çapında 9 mm boyunda implant yuvaları etrafında gözlemiştir. Ölçülen en az yoğunluk ise geleneksel yötemle hazırlanan 3.5 mm çapında15 mm boyunda implant yuvaları etrafında kaydedilmiştir. Çalışmamızda osseodensifikasyon tekniğinin sıcaklık olarak geleneksel yönteme göre daha fazla ısılara cıksada kemik nekrozunu oluşturakcak sıcaklığı geçmediği,primer stabilite ve kemik yoğunlu üzerine ciddi artışlar sağladı gözlemlenmiştir.
Özet (Çeviri)
In this thesis, it was aimed to evaluate the changes in the bone in the implant sites prepared with the Osseodensification technique and the traditional method, in-vitro. Bovine femur cortical bones were used in our study. Osseodensification technique and conventional method on bone blocks were drilled at room temperature for the preparation of implant sites with a diameter of 3.5 mm and 5.0 mm and a length of 9 mm and 15 mm. Eight groups were formed in order to examine the temperature changes in the bone by forming groups according to the method, length and diameter. Each group was formed from 30 implant sites. In order to evaluate the heat generated in the bone during drilling, the surgical tour motor used in osteotomy was adapted to the parallelometer device to enter the bone at a right angle, and the milling process was performed on the fresh bovine femur cortical bone. The temperature formed during the drilling was measured by placing 2 k-type thermocouple temperature sensors at a distance of 1 mm at each of the right and left sides of the drill hole, at a depth of 9 and 15 mm. This process was repeated 30 times for each group and the temperature measurements made during drilling were recorded. Drilling at room temperature was performed on the bone blocks with the Osseodensification technique and conventional method for the preparation of implant sites with a diameter of 3.5 mm and 5.0 mm and a length of 9 mm and 15 mm.16 groups were formed in order to examine the primary stability values of the implants placed by forming groups according to the method, length, diameter and implant thread design. For each group, 15 implant sites were created and implants were placed. The osstel device was used to evaluate the primary stability of the placed implants. Aggressive and passive implants were sent to the implant sites prepared at 9 mm and 15 mm depths manually with the insertion key, and primary stability values were recorded with the help of an osstel device. Drilling at room temperature was performed for the preparation of implant sites with a diameter of 3.5 mm and 5.0 mm with a diameter of 9 mm and a length of 15 mm with the Osseodensification technique and conventional method. Eight groups were formed in order to examine the bone density around the implant sockets by forming groups according to the method, height and diameter. Each group was formed from 30 implant sites. Sagittal sections were obtained by examining the implant sites with computed tomography. In the obtained sections, the average value was obtained and recorded in the measurements at the middle points of 0.5 mm2 of the 3 walls. As a result; In temperature experiments, no increase in temperature exceeding 47 C, which is the critical value for bone necrosis, was observed in any group. The lowest temperature occurred during drilling was observed in the group with a diameter of 3.5 mm and a height of 9 mm, which was formed with the traditional technique, and the highest temperature was observed in the Osseodensification group, which was 5.0 mm in diameter and 15 mm in length. In primary stability experiments, the highest primary stability measured was observed in the Osseodensification group, which was designed passively in terms of thread design, with a diameter of 5.0 mm and a length of 15 mm. The lowest recorded primary stability was observed in the group formed with the conventional technique, with a diameter of 3.5 mm and a length of 9 mm, which was designed passively in terms of thread design. In the bone density measurement experiments, it was observed around the implant sockets with a diameter of 5.0 mm and a length of 9 mm created by the Osseodensification group. The least measured density was recorded around the 3.5 mm diameter and 15 mm long implant sockets prepared by the conventional method. In our study, it was observed that the Osseodensification technique did not exceed the temperature that would cause bone necrosis when the temperature was higher than the traditional method, and it provided significant increases in primary stability and bone density.
Benzer Tezler
- Comparison of the effect of conventional drilling, undersized bone drilling and osseodensification techniques on primary stability, in insertion of standard dental implants into d4 bone with insertion torque, removal torque and resonance frequency analysis
Standart dental implantların D4 kemiğe yerleştirilmesinde konvansiyonel frezleme, düşük çaplı frezleme ve osseodensifikasyon tekniklerinin primer stabilitesine etkisinin, yerleştirme torku, çıkarma torku ve rezonans frekans analizi ile karşılaştırılması
ÖMER FARUK EKİZ
Doktora
İngilizce
2024
Diş HekimliğiYeditepe ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. CEYDA ÖZÇAKIR TOMRUK
- İmplant osteotomisi sırasında periferal kemikte meydana gelen sıcaklık değişiminin farklı frezleme teknikleriyle incelenmesi in vitro çalışma
Investigation of temperature change in peripheral bone during implant osteotomy with different drilling techniques in vitro study
ZEYNEP AFRA AKBIYIK AZ
Doktora
Türkçe
2022
Diş Hekimliğiİstanbul ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. GÜLSÜM AK
- Comparison of the effect of conventional and osseodensification drilling techniques on primary stability, in insertion of short dental implants into D4 bone with insertion / removal torques and resonance frequency analysis
Kısa dental implantların D4 kemik tipine yerleştirilmesinde, konvansiyonel ve osseodensifikasyon frezleme tekniklerinin primer stabiliteye etkisinin, yerleştirme/çıkarma torkları ve rezonans frekans analizi ile karşılaştırılması
FİKRİ CAN AYIK
Doktora
İngilizce
2022
Diş HekimliğiYeditepe ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. CEYDA ÖZÇAKIR TOMRUK
- Horizontal kemik yetersizliği olgularında iki farklı genişletme tekniğinin klinik ve radyolojik olarak karşılaştırılması
Clinical and radiological comparison of two different expansion techniques in cases of horizontal bone insufficiency
AHMET İLKER GÜRSOY
Doktora
Türkçe
2024
Diş HekimliğiEge ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. TAYFUN GÜNBAY
DOÇ. DR. GÖZDE IŞIK
- Kapalı sinüs cerrahisi ile eşzamanlı implant uygulamasında iki farklı tekniğin klinik ve radyolojik olarak değerlendirilmesi
Evaluation of clinical and radiological outcomes of two different techniques in internal sinus surgery with simultaneous implant placement
İREM ASYA KAFADAR GÜRBÜZ
Doktora
Türkçe
2024
Diş HekimliğiEge ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. TAYFUN GÜNBAY
DR. ÖĞR. ÜYESİ GÖZDE IŞIK