All-ON-4® ve trefoil™ implant tedavi protokollerinin karşılaştırmalı biyomekanik analizi
Comparative biomechanical analysis of all-ON-4® and trefoil™ implant treatment protocols
- Tez No: 703415
- Danışmanlar: DOÇ. DR. GÜLER YILDIRIM AVCU, DR. ÖĞR. ÜYESİ MESUT TUZLALI
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: All-on-4, trefoil, immediat yükleme, sonlu elemanlar stres analizi, All-on-4, trefoil, immediate loading, finite element stress analysis
- Yıl: 2021
- Dil: Türkçe
- Üniversite: İnönü Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 134
Özet
Amaç: Çalışmanın amacı; tam dişsiz mandibulada All-on-4 tedavi sistemi, Trefoil tedavi konsepti ve 5 implant destekli hibrit protezin immediat yüklenerek uygulanan oblik kuvvet altında kemik, implant, implant komponentleri ve protezde oluşturduğu streslerin sonlu elemanlar stres analizi ile değerlendirilmesidir. Materyal ve Metod: Bilgisayar ortamında tam dişsiz posterior atrofik mandibula modeli oluşturuldu. All-on-4 ve 5 implant destekli modeller için mental foramenler arasına yerleştirilen 5.0 mm çapta, 11.5 mm uzunlukta NobelParallel™ Conical Connection implantlar kullanıldı. All-on-4 tedavi sisteminde posterior bölgede 30° açılı multi-unit abutmentlar kullanıldı. Trefoil tedavi sisteminde ise 5.0 mm çapta, 11.5 mm uzunlukta Trefoil implantlar kullanıldı. Trefoil model için prefabrik titanyum bar modellenip alt yapı olarak uygulandı ve tüm modellere immediat akrilik hibrit protez uygulandı. Çiğneme kuvvetlerini taklit etmesi amacıyla birinci molar dişin distal triangular bölgesinde belirlenen 1.5 mm'lik alana 100 N'luk oblik kuvvet uygulanarak implant, implantı çevreleyen kemik, implant komponentleri ve protezde oluşan stres değerleri ve dağılımları sonlu elemanlar stres analizi kullanılarak karşılaştırıldı. Bulgular: Modellerde kortikal ve spongioz kemikte en yüksek basma ve çekme stres değerleri All-on-4 modelde posterior implantta gözlendi. En yüksek von Mises stres değerleri implantlarda All-on-4 modelde posterior implantta, abutment vidalarında ve protezde ise Trefoil modelde gözlendi. Sonuç: All-on-4 tedavi protokolünde kemik, implant ve abutment komplikasyon görülme riski, Trefoil tedavi protokolünde ise protez ve abutment vida komplikasyon görülme riski daha fazladır.
Özet (Çeviri)
Objective: The objective is to evaluate the stresses on bone, implant, implant components, and the prosthesis under an oblique force applied by immediate loading of All-on-4 system, the Trefoil concept, and 5-implant-supported treatment allowing hybrid prostheses in edentulous mandible, using finite element stress analysis. Material and Method: A fully edentulous atrophic mandible model was formed digitally. For All-on-4 and 5-implant-supported models, 11.5-mm long implants having a diameter of 5.0-mm placed between mental foramina were used, with 30°-angle multi-unit abutments in the posterior region. In the Trefoil system, 11.5-mm long Trefoil implants having a diameter of 5.0-mm were used. For the Trefoil model, a prefabricated titanium bar was modeled and applied as the infrastructure, and an immediate acrylic hybrid prosthesis was applied to all models. Applying 100-N oblique force to a 1.5-mm area in the distal triangular region of the first molar tooth to mimic chewing forces, the stress values and distributions in the implant, the bone, implant components, and the prosthesis were compared using finite element stress analysis. Results: The highest compressive and tensile stress values in the cortical and spongious bone were observed in the posterior implant in the All-on-4 model. The highest von Mises stress values were observed in the posterior implant in the All-on-4 model, and in abutment screws and protheses in the Trefoil model. Conclusion: The risk of bone, implant, and abutment complications is higher in the All-on-4 treatment protocol, and the risk of the prosthesis and abutment-screw complications is higher in the Trefoil treatment protocol.
Benzer Tezler
- Atrofik maksillaya sahip hastalarda farkli zigomatik ı̇mplant ve all-on-4® konseptlerinin 3 boyutlu sonlu eleman analizi ı̇le değerlendirilmesi
Evaluation of different zygomatic implant ve all-on-4® concepts in patients with atrophic maxilla by three-dimensional finite element analysis
EDA NAİFOĞLU
Doktora
Türkçe
2018
Diş HekimliğiAnkara ÜniversitesiAğız Diş ve Çene Cerrahisi Ana Bilim Dalı
PROF. DR. MİNE CAMBAZOĞLU
- Tam dişsiz alt çenenin all-on-4 implant tedavisinin biyomekanik analizi
Biomechanical analysis of all-on-4 implant treatment for edentulous mandible
AYBEN BAYRAK
Doktora
Türkçe
2017
Diş HekimliğiAnkara ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. KADRİYE FUNDA AKALTAN
- All-on-four tedavi konseptine göre yerleştirilmiş implantların farklı ölçü teknikleri ve farklı analog sistemleri kullanılarak elde edilen modellerinin ölçü hassasiyetinin değerlendirilmesi
Evaluation of the dimensional accuracy of the models made using different impression techniques and different analog systems of the implants placed according to the all-on-four treatment concept
SILA SUCUKA
Diş Hekimliği Uzmanlık
Türkçe
2024
Diş HekimliğiKırıkkale ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. VOLKAN ŞAHİN
- 'All-on-four' ve 'All-on-six' konsepti kullanılarak üretilen implant destekli sabit protezlerde farklı altyapı malzemelerinin biyomekanik karşılaştırılması: Sonlu elemanlar analizi
Biomechanical comparison of different framework materials in implant supported fixed protheses prodecud using the 'All-on-four' and 'All-on-six' concept: Finite element analysis
LALA CABBAROVA
Diş Hekimliği Uzmanlık
Türkçe
2025
Diş HekimliğiNecmettin Erbakan ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. ALİ RIZA TUNÇDEMİR
- 'ALL-ON-FOUR' tekniğine uygun olarak yerleştirilmiş titanyum implantlar üzerine farklı materyallerden üretilen üst yapıların stres dağılımının sonlu elemanlar analiz yöntemiyle incelenmesi
Evaluation of stress distributions occuring on titanium implants placed with the use of 'ALL-ON-FOUR' concept by different framework materials with finite element analysis
BETÜL KÖKDOĞAN
Doktora
Türkçe
2015
Diş HekimliğiGazi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. TURAN KORKMAZ