School of industrial and information engineeringmaster of science in mechanical engineering
Başlık çevirisi mevcut değil.
- Tez No: 720556
- Danışmanlar: PROF. CARLO GORLA
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Additive Manufacturing, gears, lattice, beam, vibrations, torsional stiffness
- Yıl: 2018
- Dil: İngilizce
- Üniversite: Politecnico di Milano
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 105
Özet
Il progetto di tesi tratta la combinazione degli aspetti relativi alla produzione di ingranaggi a reticolo e il loro modello digitale basato sugli elementi finiti. L'idea di utilizzare strutture a reticolo all'interno degli ingranaggi è nata valutando i problemi legati alle vibrazioni nei sistemi ad ingranaggi. In primo luogo, i metodi tradizionali di produzione non permettono di ottenere strutture a reticolo costituite da celle molto piccole; perciò, è stato introdotto un metodo di produzione non convenzionale, ovvero il“Selective Laser Melting”. A seguire si è presentata una breve panoramica sui tipi di reticolo e le loro proprietà. Questa spiegazione introduttiva è seguita dall'obiettivo principale del progetto, ovvero la preparazione del modello ad elementi finiti degli ingranaggi a reticolo prodotti. Durante la modellazione degli ingranaggi a reticolo si sono riscontrati alcuni problemi dovuti alla complessità geometrica di questi, si sono dunque dovute trovare soluzioni alternative. Sono state proposte due soluzioni che, prima di essere applicate sul modello degli ingranaggi, sono state validate applicandole su alcuni casi studio. Si sono preparati diversi test utilizzando il software Abaqus ed i risultati ottenuti sono stati valutati variando le condizioni di carico che tipicamente si utilizzano per questa gamma di ingranaggi. In fine, alla luce dei risultati ottenuti, è stata applicata al modello degli ingranaggi a reticolo, una delle soluzioni proposte. Sono state eseguite diverse analisi in Abaqus, comparando gli ingranaggi a reticolo e gli ingranaggi convenzionali, per valutarne le frequenze fondamentali, i modi di vibrare e rigidezza torsionale. Parole chiave: produzione additiva, ingranaggi, struttura reticolare, fascio, vibrazioni, metodo degli elementi finiti, rigidezza torsionale
Özet (Çeviri)
This project includes the combination of the aspects related with the production of the lattice gears and their computer based finite element modelling. Initially, the evolution of the idea of using lattice structures inside the gears was explained by taking into account the vibration related problems in the geared systems. First of all, traditional manufacturing methods do not allow to obtain lattice structures which consist of very small cells. Hence, an unconventional manufacturing method, in our case, Selective Laser Melting was introduced. After that, a brief overview on the lattice types and their properties was presented. These introductory explanations were followed by the main goal of the project, which is the preparation of the finite element model of the manufactured lattice gears. Because of the geometrical complexity of the lattice gears, there were some problems arised and alternative solutions were sought during the modelling of the lattice gears. Two alternative solutions were proposed and before applying them into the actual gears' model, their validity was investigated in some test cases. In Abaqus software, several test models were prepared and their responses under the various loading simulations, which are the principal cases for gears' utilization range, were evaluated. Finally, in the light of the test results, one of the proposed solutions was applied to the modelling of the lattice gears. Several analyses were performed in Abaqus, and consequently, comparisons between the lattice gears and conventional gears in terms of their natural frequencies, vibration modes and torsional stiffness were evaluated.
Benzer Tezler
- Kamu kurumlarında süreç yönetimi: İTÜ Fen Bilimleri Enstitüsü uygulaması
Public process management: An application at ITU Graduate School of Science, Engineering and Technology
ZAFER EREN
Yüksek Lisans
Türkçe
2010
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET MUTLU YENİSEY
- Gaziantep'teki Amerikan Hastanesi, hastaneye bağlı tıp ve sağlık okullarının tarihi ve çevreye etkileri
The history and impacts of The American Hospital and the connected faculty of medicine and health schools in antep
GÜLKİZİLCA YÜRÜR
Doktora
Türkçe
2013
Deontoloji ve Tıp Tarihiİstanbul ÜniversitesiDeontoloji ve Tıp Tarihi Ana Bilim Dalı
PROF. DR. NURAN YILDIRIM
- Sağlık sektöründe toplam kalite yönetimi
Total quality management in healt-care industry
METİN ŞENGÜL
Yüksek Lisans
Türkçe
1997
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. ETHEM TOLGA
- Performance measurement system for higher education based on balanced scorecard framework
Yüksek eğitim kurumları için dengeli puan kartı temelli performans ölçüm sistemi
ORKUN KOZANOĞLU
Yüksek Lisans
İngilizce
2002
Endüstri ve Endüstri MühendisliğiBoğaziçi ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ RIZA KAYLAN
- Mesleki ve teknik lise öğrencilerinin Endüstri 4.0 kapsamındaki beceri düzeylerine ilişkin algı: Ankara ili örneği
Perception of vocational and technical high school students' skill levels within the scope of Industry 4.0: The case of Ankara province
PINAR SALİH
Yüksek Lisans
Türkçe
2022
Çalışma Ekonomisi ve Endüstri İlişkileriAnkara Yıldırım Beyazıt ÜniversitesiSosyal Politika Ana Bilim Dalı
DOÇ. DR. SÜHEYLA ERİKLİ SELEK