Tek diş eksikliğinde farklı adet ve tasarımlarda implant uygulanmasının farklı kuvvetler altında oluşturduğu stres dağılımının sonlu elemanlar analiz yöntemi ile incelenmesi
Evaluation of the stress distribution of dental implant application in different numbers and designs for single tooth replacement under functional and parafunctional forces by finite element analysis method
- Tez No: 729829
- Danışmanlar: PROF. DR. NİLÜFER ÖZKAN
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Dental İmplant, Bruksizm, Sonlu Elemanlar Stres Analizi, Mekanostat teorisi, Dental Implant, Bruxism, Finite Element Stress Analysis, Mechanostat theory
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Ondokuz Mayıs Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Ağız, Diş, Çene Hastalıkları ve Cerrahisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 220
Özet
Amaç: Bu çalışmanın amacı, molar tek diş eksikliği rehabilitasyonu için farklı sayı ve tasarımlardaki implantlar ile desteklenen protetik üniteye uygulanan fonksiyonel ve parafonksiyonel kuvvetlerin neden olduğu stres dağılımlarının değerlendirilmesidir. Materyal ve Metot: Bu çalışmada 3B Modelleme yöntemi kullanılarak 5 farklı model oluşturulmuştur. Bunlar arasında Model 1'de 4.8 mm çapında bone-level implant, Model 2'de 6.5 mm çapında ve kısa/geniş implant, Model 3'te 2 adet 3.3 mm çapında bone-level implant, Model 4'te 2 adet 3.3 mm çapında tissue-level implant ve Model 5'te 2 adet 3,3 mm çapında bone-level konik implant kullanılmıştır. Modeller, protez ünitesine farklı büyüklük ve yönde uygulanan kuvvetlere dayalı olarak A ve B olmak üzere iki alt gruba ayrıldı. Gerilme dağılımını değerlendirmek için Sonlu Eleman Analizi yöntemi kullanılmıştır. Bulgular: Molar tek diş eksikliği vakalarında, tek implant uygulamalarına göre protetik yapı iki implant veya bir geniş/kısa implant ile desteklendiğinde implant ve çevre kemik dokusuna iletilen stres değerlerinde azalma gözlemlenmiştir. Parafonksiyonel kuvvetlerin etkisi altında en yüksek gerilme ve gerinim implant yuvalarının bukkal ve lingual yüzeylerinde ve kompresif kuvvetleri tanımlayan minimum asal gerilme ve gerinim değerlerinde gözlenmiştir. Düşük yoğunluklu kemik dokularındaki minimum asal gerilme değerlerinin tüm gruplarda yüksek yoğunluklu kemik dokularına göre daha yüksek olduğu belirlenmiştir. Sonuç: Bruksizmi olan bireylerde posterior tek diş eksikliğinin rehabilitasyonu amaçlı iki implant üzerine tek kuron veya yeni nesil geniş çaplı ve kısa implant üzeri tek kuron uygulamaları stres dağılımını azaltma açısından avantajlar sunmaktadır.
Özet (Çeviri)
Aim: The aim of this study is to evaluate stress distribution created by application of functional and parafunctional forces on prosthetic unit supported by different numbers and designs of implants for molar single tooth replacement. Material and Method: In this study, 5 different models were set by employing the 3D Modeling method. These included 4.8 mm diameter bone level implant in Model 1, 6.5 mm diameter and short/wide implant in Model 2, 2x3.3 mm diameter bone level implants in Model 3, 2x3.3 mm diameter tissue level implants in Model 4, and 2x3.3 mm diameter bone level tapered implants in Model 5. The models were allocated into two subgroups, A and B, based on the forces applied in diverse magnitude and direction on the prosthetic unit. Finite Element Analysis method was utilized to assess the stress distribution. Results: In single molar tooth replacement cases, the stress levels affecting the implants and bone tissue decreased when the prosthetic structure was supported by two implants or one wide/short implant compared to single implant applications. Under the influence of parafunctional forces, the highest stress and strain were observed on the buccal and lingual surfaces of the implant sockets and at the minimum principal stress and strain values that define the compressive forces. It was determined that the minimum principal strain values in low-density bone tissues were higher in all groups compared to those high-density bone tissues. Conclusion: For the rehabilitation of posterior single tooth replacement in individuals with bruxomania, single crown over two implants or new generation short and large diameter implants offer advantages in terms of reducing stress distribution.
Benzer Tezler
- Assessment of urbanization history of Addis Ababa city, Ethiopia
Addıs Ababa cıty, Ethıopıa'nın kentleşme tarihinin değerlendirilmesi
ABDURAHMAN HUSSEN YIMER
Yüksek Lisans
İngilizce
2023
Şehircilik ve Bölge PlanlamaMersin ÜniversitesiŞehir ve Bölge Planlama Ana Bilim Dalı
DOÇ. DR. ALİ CENAP YOLOĞLU
- Statistical design and yield enhancement of low voltage cmos VLSI circuits
Düşük gerilimli analog VLSI devrelerin istatistiksel tasarımı
TUNA B. TARIM
Doktora
İngilizce
1999
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiPROF.DR. H. HAKAN KUNTMAN
- Farklı ölçü teknikleri ve splintleme yönteminin çoklu implantlarda pozisyon doğruluğuna etkisinin değerlendirilmesi
Evaluation of the effect of different impression techniques and splinting method on position accuracy in multiple implants
SİMEL KARACA
Diş Hekimliği Uzmanlık
Türkçe
2021
Diş HekimliğiSelçuk ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. ÖZGÜR İNAN
- Posterior tek diş eksikliğinde modifiye inley tutuculu adeziv köprülerin klinik uygulaması: dört yıllık klinik çalısma
Clinical application of posterior modified inlay retained adhesive fixed partial dentures in cases with a single missing tooth: a four-year clinical study
AYÇA DENİZ İZGİ
Doktora
Türkçe
2005
Diş HekimliğiDicle ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF.DR. ŞEBNEM ESKİMEZ
- Yeni jenerasyon CAD/CAM implantüstü kron materyalleri PEEK, zirkonya-lityum silikat-ZLS, lityum disilikat, rezin modifiye hibrit seramikler ile farklı abutment sistemlerinde kuvvet dağılımının sayısal yöntemler ile değerlendirilmesi
Stress distribution evaluation of the effect of new generation CAD/CAM restorative materials PEEK, zirconia-lithium silicate-zls, lithium disilicate, resin modified hybrid ceramics and different abutment materials with numerical methods
GÜLSÜM GÖKÇİMEN
Diş Hekimliği Uzmanlık
Türkçe
2022
Diş HekimliğiAfyonkarahisar Sağlık Bilimleri ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DR. ÖĞR. ÜYESİ NERGİZ RONA