Geri Dön

Farklı kesitlere sahip filament fdy iplikler kullanılarak üretilen tekstil yüzeylerinin akustik performanslarının incelenmesi

Examination of acoustic performance of textile surfaces manufactured using filament fdy yarns with different sections

  1. Tez No: 756895
  2. Yazar: BEYZANUR ERDAL
  3. Danışmanlar: PROF. DR. ERHAN SANCAK
  4. Tez Türü: Yüksek Lisans
  5. Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Marmara Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Tekstil Mühendisliği Bilim Dalı
  13. Sayfa Sayısı: 97

Özet

Gürültü, günümüzün önemli sorunlarından biri olarak karşımıza çıkmaktadır. İnsan sağlığını etkileyen bu sorun, gürültü önleyici materyallerin kullanımı ile en aza indirilmektedir. Gürültü kontrolünde kullanılan materyaller arasında tekstil malzemeleri de bulunmaktadır. Bu çalışma kapsamında, gürültü kontrolünde kullanılması amacıyla tekstil yapıları üretilmiştir. 7 farklı lif enine kesit şekline sahip FDY polyester iplikler kullanılarak, çözgülü örme kumaş yapıları üretilmiştir. Numunelerin ses yutum katsayısı empedans tüp metodu ile belirlenmiştir. Çalışmanın ilk bölümünde, polyester iplik, ses, gürültü ve çözgülü örme kumaş teknolojisi hakkında genel bilgiler bulunmaktadır. Bölüm sonunda literatürde bulunan çeşitli çalışmalara yer verilmiştir. İkinci bölümde, materyal ve yöntem sunulmuştur. Çalışmada kullanılan iplik özellikleri, üretilen numunelerin özellikleri ve test edilmesi hususundaki bütün bilgiler detaylı bir şekilde açıklanmıştır. Üçüncü bölümde, empedans tüp metodu ile ses yutum tayini yapılan numunelerden elde edilen veriler sunulmuş ve grafikler ayrı ayrı incelenerek yorumlanmıştır. Son kısımda ise çalışma neticesinde elde edilen verilere dayanarak, yapıların gürültü kontrolünde kullanılabilmesi açısından değerlendirmesi yapılmıştır.

Özet (Çeviri)

Noise is one of the important problems of our time. This problem, which affects human health, is minimized by the use of noise-canceling materials. Among the materials used in noise control are textile materials. Within the scope of this study, textile structures were produced for use in noise control. By using FDY polyester yarns with seven different fiber cross-section shapes, warp-knitted fabric structures were produced. The sound absorption coefficient of the samples was determined by the impedance tube method. In the first part of the study, there is general information about polyester yarn, sound, noise, and warp-knitted fabric technology. At the end of the chapter, several studies in the literature are included. In the second part, the material and method are presented. The yarn properties used in the study, the properties of the samples produced, and all the information about the testing are explained in detail. In the third part, the data obtained from the samples determined by sound absorption by the impedance tube method are presented, and the graphs are examined and interpreted separately. In the last part, based on the data obtained as a result of the study, the structures were evaluated in terms of being used in noise control.

Benzer Tezler

  1. Besleme ipliği türlerinin (POY ve FDY) ve filament kesit şekillerinin hava-jeti ile tekstüre edilmiş iplik özelliklerine etkisi

    Effects of feeder yarn types (POY and FDY) and filament cross-sectional shapes on the properties of air jet textured yarns

    BURÇİN ÇİMENLİKAYA

    Yüksek Lisans

    Türkçe

    Türkçe

    2008

    Tekstil ve Tekstil MühendisliğiMarmara Üniversitesi

    Tekstil Eğitimi Ana Bilim Dalı

    DOÇ. DR. SUAT CANOĞLU

  2. Poliester lif özelliklerinin örme kumaşların ısıl konfor ve mekanik özelliklerine etkisi

    A research on influences of the poliester fibres on thermal properties and mechanical behaviours of knitted fabrics

    SİNEM BOZDOĞAN

    Yüksek Lisans

    Türkçe

    Türkçe

    2008

    Tekstil ve Tekstil MühendisliğiEge Üniversitesi

    Tekstil Mühendisliği Bölümü

    PROF. DR. ARZU MARMARALI

  3. Farklı kesitlere sahip filament hava jet tekstüre iplikler kullanılarak üretilen tekstil yüzeylerinin akustik performanslarının incelenmesi

    Investigation of acoustic performance of textile surfaces produced using filament air jet textured yarns with different cross-sections

    TUĞBA AKPINAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Tekstil ve Tekstil MühendisliğiMarmara Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. ERHAN SANCAK

  4. İçi boş poliester multifilamentlerden dokunmuş iletken polimerik kumaşların kapasitif ve rezistif basınç sensör özelliklerinin araştırılması

    Investigation of capacitive and resistive pressure sensor features of conductive polymeric sensor fabrics woven with hollow polyester multifilament

    HİDAYET BAĞCI

    Doktora

    Türkçe

    Türkçe

    2023

    Tekstil ve Tekstil MühendisliğiKahramanmaraş Sütçü İmam Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. SUAT ÇETİNER

    DOÇ. DR. HATİCE KÜBRA KAYNAK