Geri Dön

Taşınabilir cihazlar için 10 w'lık bir etanol yakıt hücresi modeli geliştirilmesi

Development of a 10 watt ethanol fuel cell model for portable devices

  1. Tez No: 763875
  2. Yazar: ŞULE ÇELİK
  3. Danışmanlar: PROF. YÜKSEL KAPLAN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Doğrudan etanol yakıt hücresi, matematiksel modelleme, nümerik analiz, Direct ethanol fuel cell, mathematical modeling, numerical analysis
  7. Yıl: 2022
  8. Dil: Türkçe
  9. Üniversite: Niğde Ömer Halisdemir Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Makine Mühendisliği Bilim Dalı
  13. Sayfa Sayısı: 70

Özet

Bu tez çalışması kapsamında Doğrudan Etanol Yakıt Hücreleri (DEYH) performansına etki eden proses parametreleri teorik olarak araştırılmıştır. Teorik çalışmada DEYH'de meydana gelen ısı ve kütle transferi, akış ve kimyasal reaksiyonlar için iki boyutlu bir matematiksel model geliştirilmiş ve nümerik olarak çözülmüştür. Etanol konsantrasyonun, katot basıncının, hava debisinin ve sıcaklığın performansın belirlenmesinde en etkin parametreler olduğu görülmüştür. Hava debisinin ve katot basıncının artmasıyla yakıt hücresinin performansı etkilediği gözlenmiştir. Yüksek sıcaklıklarda performans reaksiyon kinetiğinin iyileşmesi ile önemli ölçüde arttığı ve yüksek yakıt konsantrasyonlarında ise anottan katoda etanol geçişi nedeniyle performansın düştüğü tespit edilmiştir. Elde edilen sonuçlar akım yoğunluğuna ve etanolün debisine bağlı olarak yığın çıkışına doğru yakıt konsantrasyonunun azalabileceğini göstermiştir. Nümerik sonuçların literatürdeki deneysel bir çalışmanın sonuçlarıyla uyumlu olduğu dolayısıyla geliştirilen matematiksel modelin geçerliliği test edilmiştir.

Özet (Çeviri)

Within the scope of this thesis, the process parameters affecting the performance of Direct Ethanol Fuel Cells (DEYH) were investigated theoretically. n the theoretical study, a two-dimensional mathematical model was developed and solved numerically for the heat and mass transfer, flow and chemical reactions occurring in DEYH. Ethanol concentration, cathode pressure, air flow and temperature were found to be the most effective parameters in determining performance. It was observed that the fuel cell performance was affected by the increase in air flow and cathode pressure. It has been determined that the performance at high temperatures increases significantly with the improvement of the reaction kinetics, and at high fuel concentrations, the performance decreases due to the ethanol transition from the anode to the cathode. The results showed that the fuel concentration might decrease towards the stack exit depending on the current density and the flow rate of the ethanol. Since the numerical results are compatible with the results of an experimental study in the literature, the validity of the developed mathematical model has been tested.

Benzer Tezler

  1. Switching mode power supply and fly back converter design

    Başlık çevirisi yok

    ERKİN CÜCE

    Yüksek Lisans

    İngilizce

    İngilizce

    1998

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    PROF. DR. EMİN TACER

  2. Fiziksel buhar biriktirme yöntemiyle katı hal lityum iyon pil bileşenlerinin geliştirilmesi

    Development of solid state lithium-ion battery components by physical vapor deposition method

    ENGİN ALKAN

    Doktora

    Türkçe

    Türkçe

    2023

    EnerjiSakarya Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MEHMET OĞUZ GÜLER

  3. Esnek süperkapasitörler için metal destekli grafen oksit katkılı hidrojel malzemelerin üretimi ve elektrokimyasal karakterizasyonu

    Production and electrochemical characterization of metal supported graphene oxide-doped hydrogel materials for flexible supercapacitors

    BETÜL DEMİR

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Kimyaİstanbul Üniversitesi-Cerrahpaşa

    Kimya Ana Bilim Dalı

    PROF. DR. CEMAL ÖZEROĞLU

    DR. SİBEL YAZAR AYDOĞAN

  4. İşitme engelliler için homojen alan dağılımlı gişe tipi ses frekansı indüksiyon döngü sistemi tasarımı

    Uniform field distribution audio frequency counter induction loop design for hearing impaired

    MELTEM LORDOĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ DENİZ YILDIRIM

    DOÇ. DR. SERHAT İKİZOĞLU

  5. Kahramanmaraş il merkezinde elektromanyetik alan şiddetinin ölçülmesi ve haritalandırılması

    Measurement of electromagnetic field strength in the centre of Kahramanmaras and its the mapping

    ÖZLEM ŞAHİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    BiyomühendislikKahramanmaraş Sütçü İmam Üniversitesi

    Biyomühendislik ve Bilimleri Ana Bilim Dalı

    PROF. DR. ÖMER SÖĞÜT