Geri Dön

Lignoselülozik materyallerin termal parçalanma mekanizmaları

Thermal degradation mechanisms of lignocellulosic materials

  1. Tez No: 78063
  2. Yazar: GÖKHAN DEMİRCİOĞLU
  3. Danışmanlar: PROF. DR. AYHAN DEMİRBAŞ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Eğitim ve Öğretim, Kimya, Education and Training, Chemistry
  6. Anahtar Kelimeler: Lignoselülozik Materyal, Termal Bozunma Mekanizması, Piroliz, Piroliz Ürünleri. VI, Lignocellulosic Material, Thermal Degradation Mechanism, Pyrolysis, Pyrolysis Products
  7. Yıl: 1998
  8. Dil: Türkçe
  9. Üniversite: Karadeniz Teknik Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Fen Bilimleri Eğitimi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 65

Özet

ÖZET Bu çalışmada, lignoselülozik materyal numunelerinin yapısal bileşenlerinin pirolitik bozunma mekanizmaları ayrı ayrı incelendi. Sıcaklık arttıkça pirolitik kömür verimleri ve bu kömürlerdeki uçucu madde ve hidrojen içerikleri azalırken uçucu olmayan toplam karbon içerikleri artmaktadır. Fındık kabuğunun pirolizinden elde edilen asetik asit ve metanol verimleri diğer biyokütle numunelerinkinden hayli yüksekti ve yayvan yapraklı ağaçlardan elde edilen asetik asit verimi, genellikle, ibreli ağaçlarınkinden yüksekti. Odunun üç ana bileşeninden de asetik asit elde edilmektedir. Orijin olarak selüloz, hemiselülozlar ve ligninden elde edilen asetik asit verimi odunun kendisinden elde edilen toplam veriminden hayli azdı. Bu durum, asetik asidin ana kaynağının tek bileşenlerin ayrılmaları esnasında yanlan asetil grupları olduğu gerçeği ile açıklanabilir. Lignin pirolizinin karakteristiği, gazların yüksek karbon monoksit ihtiva etmesiydi. Ladin lignininin pirolizi yaklaşık % 49 karbon monoksit verirken, karbon dioksit muhtevası sadece % 9,6 ve selülozun pirolizinden elde edileninki ise % 62,9 idi. Fındık kabuğunun pirolizinde ısıtma hızı arttıkça uçucu materyal verimi artmaktadır. Pirolitik kömür verimi piroliz sıcaklığına ve ısıtma hızına bağlıydı. Isıtma hızının aniden artmasıyla kömür oluşumu azalmaktadır. Sonuç olarak karbonlaşma süresi uzadıkça kömür verimi azalmaktadır.

Özet (Çeviri)

SUMMARY Thermal Degradation Mechanisms of Lignocellulosic Materials In this study, mechanisms of the pyrolytic degradation of structral components of the lignocellulosic material samples were separately studied. The yields of charcoal and the contents of volatile subtances and hydrogen in the charcoals decreased with increasing temperature, while the total and non-volatile carbon contents increased during the pyrolysis. The yields of acetic acid and methanol from pyrolysis of hazelnut shell were considerably higher than those of the other biomass samples and the yield of acetic acid from pyrolysis of deciduous woods was generally higher than those of coniferous woods. Acetic acid was obtained from the thermal decomposition of all three main components of wood. When the yield of acetic acid originating from the cellulose, hemicelluloses, and lignin was taken into account, the total was considerably less than the yield from to wood itself. This can be explained by the fact that the main source of acetic acid is the acetyl groups which are split off during the isolation of the single components. Characteristic of the pyrolysis of lignin was the high carbon monoxide content of the gases. While the pyrolysis of spruce lignin gave about 49 % carbon monoxide, its carbon dioxide content was only 9.6 % and that of from the pyrolysis of cellulose was 62.9 %. The faster heating rate, the higher the volatile material yield in the pyrolysis of hazelnut shell. The yield of pyrolytic charcoal was dependent on pyrolysis temperature and heating rate. The charcoal formation decreased with icreasing sharply the heating rate. As a result the yield of charcoal decreased as the carbonization time increased.

Benzer Tezler

  1. Organik ve inorganik katkı malzemeleriyle lignoselülozik fiberlerin modifikasyonu ve ilgili ürünlerin özelliklerinin iyileştirilmesi

    Modification of lignocellulosic fibers with organic and inorganic additives and improvement of the properties of related products

    AHMET GENÇER

    Doktora

    Türkçe

    Türkçe

    2020

    KimyaAkdeniz Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. ERTUĞRUL ARPAÇ

  2. Biogas recovery during anaerobic treatment of lignocellulose-rich pollutants with high sulphate content: an investigation via innovative applications

    Yüksek sülfat içerikli lignoselüloz bakımından zengin kirleticilerin havasız arıtımı sırasında biyogaz geri kazanımı: yenilikçi uygulamalarla bir araştırma

    EDA YARSUR

    Yüksek Lisans

    İngilizce

    İngilizce

    2021

    Çevre Mühendisliğiİstanbul Teknik Üniversitesi

    Çevre Mühendisliği Ana Bilim Dalı

    PROF. DR. ÇİĞDEM GÖMEÇ

  3. Farklı beyazlık çürüklük mantarları ile inkübe edilmiş lignoselülozik materyallerden biyobozunur malzemelerin üretilmesi ve teknolojik özelliklerinin belirlenmesi

    Production of biodegradable materials from lignocellulosic materials inculated with different white root fungus and determination of their technological properties

    SÜLEYMAN KUŞTAŞ

    Doktora

    Türkçe

    Türkçe

    2022

    Ormancılık ve Orman MühendisliğiKaradeniz Teknik Üniversitesi

    Orman Endüstri Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ENGİN DERYA GEZER

  4. Yer fıstığı kabuğundan hazırlanan karbon türevi malzemelerin hidrojen depolama kapasitelerinin belirlenmesi

    Determination of hydrogen storage capacity of carbon derivative materials prepared from peanut shells

    MERVE BOYLUCA

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    KimyaBalıkesir Üniversitesi

    Kimya Ana Bilim Dalı

    DOÇ. DR. YASEMİN TURHAN

  5. Giresun ilinde bulunan lignoselülozik materyallerden polimer kompozit üretimi

    Evaluation of lignocellulosic materials in the production of polymer composites existing in the Giresun province

    UĞUR ÇUKUR

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    Ağaç İşleriArtvin Çoruh Üniversitesi

    Orman Endüstri Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. MÜRŞİT TUFAN