Prusya mavisi ile modifiye edilmiş vermikülit manyetik nanopartiküllerin sezyum adsorpsiyonunda kullanımı
Use of prussian blue modified vermiculite magnetic nanoparticles in cesium adsorption
- Tez No: 812668
- Danışmanlar: DOÇ. DR. ÜMRAN HİÇSÖNMEZ
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Manisa Celal Bayar Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Fizikokimya Bilim Dalı
- Sayfa Sayısı: 199
Özet
Mevcut çalışmada, 137Cs'nin 30 yıllık uzun bir yarı ömre sahip olduğu ve bulunduğu ortamdan uzaklaştırılması gerektiği, ayrıca adsorpsiyon yönteminin endüstriyel ve bilimsel skalada metal iyonlarının çözeltilerden uzaklaştırılmasında avantajlı bir yöntem olduğu bilindiğinden, Türkiye'de Sivas-Yıldızeli bölgesi Karakoç madeninden yerel madencilik prosedürleri ile çıkarılan vermikülit minerali ile Prusya mavisi molekülü Fe3O4 nanopartiküllerin bulunduğu ortamda sentezlenmiş ve bir Cs adsorbanı olarak kullanılmıştır. Bu çalışma temel olarak 3 kısımdan oluşmaktadır. Birinci kısımda, ülkemizde Sivas-Yıldızeli bölgesi Karakoç madeninden yerel madencilik prosedürleri ile çıkarılan vermikülit mineralinin yapı karakterizasyonu FT-IR, XRF ve XRD karakterizasyon yöntemleri kullanılarak gerçekleştirilmiş, mineralin yapısındaki fonksiyonel gruplar, farklı türlerdeki bileşikler ve mineralin kristal örgüsü aydınlatılmış, vermikülit minerali kullanılarak Cs adsorpsiyonda optimum koşulların belirlenmesi için denemeler yapılmıştır. İkinci kısımda, hidrotermal sentez yöntemi kullanılarak manyetit (Fe3O4) nanopartiküllerin varlığında bilimsel literatürde ilk defa, ülkemizde bulunan vermikülit minerali ile Prusya mavisi molekülünün modifikasyonu sonucunda yeni nesil PB/Fe3O4/VER nanokompozit sentezlenmiştir. Yapılan VSM analizi ile nanokompozitin manyetizasyon değerinin düşük olduğu gözlenmiştir. Üçüncü kısımda, hidrotermal sentez ile elde edilen nanokompozitin doygunluk manyetizasyon değerinin yükseltileblmesi ve karşılaştırma yapılabilmesi için alternatif bir sentez yöntemi olan çöktürme sentez yöntemi uygulanarak alkali ortamda yeni nesil PB/Fe3O4/VER nanokompozit elde edilmiştir. FT-IR, XRD, SEM-EDX ve VSM analizleri sonucunda hidrotermal ve çöktürme yöntemleri ile elde edilen yeni nesil nanokompozitlerin başarılı bir şekilde sentezlendiği görülmüştür. Ayrıca çöktürme sentezi ile elde edilen nanokompozitin hidrotermal sentezle elde edilene kıyasla doygunluk manyetizasyon değerinin yaklaşık 140 kat arttırıldığı gözlenmiştir. Cs adsorpsiyon prosesinde yapılan optimizasyon çalışmalarında ham vermikülit için optimum koşullar; adsorban miktarı 0,2 g, çözelti pH'ı 8, Cs başlangıç konsantrasyonu 200 mg/L, çalkalama süresi 5 saat ve sıcaklık 25°C olarak bulunmuştur. Hidrotermal sentez ile elde edilen PB/Fe3O4/VER nanokompozit için optimum çözelti pH'ı ve optimum Cs başlangıç konsantrasyonu sırasıyla pH 5 ve 200 mg/L olarak saptanmıştır. Çöktürme sentezi ile elde edilen PB/Fe3O4/VER nanokompozit için yapılan optimizasyon çalışmalarında nanokompozit miktarı, optimum çözelti pH'ı, optimum Cs başlangıç konsantrasyonu, optimum çalkalama süresi ve optimum sıcaklık sırasıyla 0,5 g, pH 6, 100 mg/L, 1 saat ve 40°C olarak bulunmuştur. Buna göre optimum koşullarda ortamdaki Cs+ iyonlarını sırasıyla ham vermikülit %87, hidrotermal sentez yöntemi ile elde edilen nanokompozit %83, çöktürme sentez yöntemi ile elde edilen nanokompozit ise %91 verimle adsorplayabilmiştir. Dolayısıyla çöktürme sentezi ile edilen nanokompozitin ham vermikülit ve hidrotermal sentezle elde edilen nanokompozite kıyasla sezyumu daha yüksek bir verimle adsorplayabilme etkinliğine sahip olduğu tespit edilmiştir. Adsorpsiyonun fizikokimyasal ve termodinamik karakterinin belirlenmesi, adsorpsiyon kinetiğinin aydınlatılması için yapılan çalışmalarda ham vermikülit için prosesin Langmuir, Freundlich, D-R ve Temkin izotermleri ile uyumlu olduğu, dolayısıyla adsorpsiyonun hem fiziksel hem de kimyasal bir karaktere sahip olduğu görülmüştür. D-R izotermi sonucunda elde edilen adsorpsiyon enerjisi 16,23 kJ/mol, adsorpsiyon prosesinde kimyasal adsorpsiyonun hakim olduğuna işaret etmektedir. Bununla beraber, adsorpsiyonun yalancı 2. dereceden kinetik modele uyduğu gözlenmiştir. Adsorpsiyon prosesinin kendiliğinden ve ekzotermik olduğu, ayrıca, Cs'un vermikülit yüzeyinde adsorpsiyonu esnasında sıvı-katı faz arasındaki düzensizliğin arttığı sonucuna varılmışır. Farklı türlerdeki elüsyon çözeltileri ile gerçekleştirilen desorpsiyon çalışmalarında oksalik asidin 45°C ve 65°C'de Cs+ iyonlarının %90-%100'ünü desorplayabildiği gözlenmiştir. Ortak iyon çalışmalarında çözelti ortamında K+ iyonlarının 2 katı konsantrasyonda Cs+ iyonları varlığında %65 verimle Cs adsorpsiyonu gerçekleştirilebilmiştir. Hidrotermal sentezle elde edilen nanokompozit ile yapılan çalışmalarda Cs adsorpsiyon prosesinin Langmuir, Freundlich ve D-R izotermlerinin tamamı ile uyumlu olduğu, dolayısıyla proseste hem kimyasal hem de fiziksel bir adsorpsiyonun var olduğu gözlenmiştir. D-R izotermi sonucunda elde edilen adsorpsiyon enerjisi 10 kJ/mol olarak bulunmuştur. Çöktürme sentezi ile elde edilen nanokompozit ile yapılan çalışmalarda Cs adsorpsiyon prosesinin Freundlich ve D-R izotermi ile uyumlu olduğu, dolayısıyla prosese fiziksel bir adsorpsiyonun hakim olduğu sonucuna varılmış, D-R izotermi sonucunda elde edilen adsorpsiyon enerjisi 0,92 kJ/mol bu sonucu doğrulamıştır. Kinetik çalışmalara göre adsorpsiyon prosesinin yalancı 2. dereceden kinetik model ile uyumlu olduğu gözlenmiştir. Termodinamik çalışmalar prosesin dış bir enerjiye ihtiyaç duymadan kendiliğinden gerçekleşebildiği, ekzotermik bir karakterde olduğu ve adsorpsiyonda iki faz arasındaki düzensizliğin arttığını göstermektedir. Elüsyon çözeltileri ile yapılan desorpsiyon çalışmalarında geri alım verimlerinin oldukça düşük olduğu, ortak iyon etkisinde çözelti ortamındaki Cs+ iyonlarının 4 katı konsantrasyonda K+ iyonları varlığında dahi %90'ın üstündeki verimlerle Cs adsorpsiyonun gerçekleştirilebildiği tespit edilmiştir.
Özet (Çeviri)
In the current study, since 137Cs has a long half-life of 30 years and should be removed from the environment in which it is located, also as it is known that the adsorption method is an advantageous method for removing metal ions from solutions on an industrial and scientific scale, the vermiculite mineral extracted by local mining procedures from the Karakoc mine in the Sivas-Yildizeli region in Turkey and the prussian blue molecule were synthesized in an environment containing Fe3O4 nanoparticles and used as a Cs adsorbent. This study mainly consists of 3 parts. In the first part, the structure characterization of the vermiculite mineral extracted by local mining procedures from the Karakoç mine in the Sivas-Yıldızeli region in our country was performed using FT-IR, XRF and XRD characterization methods, functional groups in the structure of the mineral, compounds of different types and the crystal lattice of the mineral were illuminated, experiments were conducted to determine the optimal conditions for Cs adsorption using vermiculite mineral. In the second part, a new generation PB/Fe3O4/VER nanocomposite was synthesized for the first time in the scientific literature in the presence of magnetite (Fe3O4) nanoparticles using the hydrothermal synthesis method as a result of the modification of the prussian blue molecule with the vermiculite mineral found in our country. With the VSM analysis performed, it was observed that the magnetization value of the nanocomposite was low. In the third part, a new generation PB/Fe3O4/VER nanocomposite was obtained in an alkaline environment by applying the precipitation synthesis method, which is an alternative synthesis method, in order to increase the saturation magnetization value of the nanocomposite obtained by hydrothermal synthesis, and to make comparisons. As a result of FT-IR, XRD, SEM-EDX and VSM analyses, it has been seen that a new generation of nanocomposites obtained by hydrothermal and precipitation methods have been successfully synthesized. In addition, it has been observed that the saturation magnetization value of the nanocomposite obtained by precipitation synthesis is increased by about 140 times compared to that obtained by hydrothermal synthesis. In the optimization studies conducted in the Cs adsorption process, the optimal conditions for raw vermiculite were found to be; the amount of adsorbent was 0.2 g, the pH of the solution was 8, the initial concentration of Cs was 200 mg/L, the shaking time was 5 hours and the temperature was 25°C. The optimum solution pH and the optimum initial concentration of Cs for the PB/Fe3O4/VER nanocomposite obtained by hydrothermal synthesis were determined as pH 5 and 200 mg/L, respectively. The amount of nanoadsorbent, optimum solution pH, optimum Cs initial concentration, optimum agitation time and optimum temperature were found to be 0.5 g, pH 6, 100 mg/L, 1 hour and 40°C respectively in the optimization studies for the PB/Fe3O4/VER nanocomposite obtained by precipitation synthesis. Accordingly, under optimal conditions, the Cs+ ions in the environment were able to adsorb crude vermiculite with 87%, nanocomposite obtained by hydrothermal synthesis method with 83%, and nanocomposite obtained by precipitation synthesis method with 91% efficiency, respectively. Therefore, it has been found that the nanocomposite obtained by precipitation synthesis has the ability to adsorb Cs with a higher efficiency compared to the nanocomposite obtained by crude vermiculite and hydrothermal synthesis. In the studies conducted to determine the physicochemical and thermodynamic character of adsorption, to elucidate the adsorption kinetics, it was found that the process for raw vermiculite is compatible with the Langmuir, Freundlich, D-R and Temkin isotherms, so the adsorption has both a physical and chemical character. The adsorption energy obtained as a result of the D-R isotherm is 16.23 kJ/mol, indicating that chemical adsorption dominates the adsorption process. Also, it was observed that the adsorption fit the pseudo second order kinetic model. It was concluded that the adsorption process is spontaneous and exothermic, and in addition, disorder between the liquid and solid phase increases during the adsorption of Cs on the vermiculite surface. In desorption studies performed with different types of elution solutions, it was observed that oxalic acid can desorp 90%-100% of Cs+ ions at 45°C and 65°C. In foreign ion studies, Cs adsorption could be performed with 65% efficiency in the presence of Cs+ ions at 2 times the concentration of K+ ions in solution medium. In studies with the nanocomposite obtained by hydrothermal synthesis, it was seen that the Cs adsorption process was compatible with all Langmuir, Freundlich and D-R isotherms, so there is both a chemical and physical adsorption in the process. The adsorption energy obtained as a result of D-R isotherm was found to be 10 kJ/mol. In studies with the nanocomposite obtained by precipitation synthesis, it was concluded that the Cs adsorption process was compatible with Freundlich and D-R isotherm, therefore, a physical adsorption dominates the process, the adsorption energy obtained as a result of D-R isotherm is 0.92 kJ/mol confirmed this result. According to kinetic studies it was observed that the adsorption process was compatible with the pseudo second order kinetic model. Thermodynamic studies show that the process can occur spontaneously without the need for external energy, is exothermic in character, and the disorder between the two phases increases in adsorption. In desorption studies with elution solutions, it was found that the reuptake efficiencies were quite low, and Cs adsorption can be performed with efficiencies above 90% even in the presence of K+ ions at 4 times the concentration of Cs+ ions in the solution medium under the influence of foreign ions.
Benzer Tezler
- Modifiye magnetit yapılarının hazırlanması, karakterizasyonu ve analitik uygulamaları
Preparation, characterization and analytical applications of modified magnetite structures
YUSUF GÖGEN
Yüksek Lisans
Türkçe
2022
KimyaErzincan Binali Yıldırım ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. KEMAL VOLKAN ÖZDOKUR
DOÇ. DR. ÇAĞRI CEYLAN KOÇAK
- H2O2 tayini için nanopartiküllere dayanan amperometrik sensör ve biyosensör geliştirilmesi
Development of nanoparticle based amperometric sensor and biosensor for H2O2
KUBİLAY TUNCA
Yüksek Lisans
Türkçe
2020
KimyaTekirdağ Namık Kemal ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. FUNDA ÖZTÜRK
DOÇ. DR. PINAR ESRA ERDEN
- Spermin ve spermidin tayini için (biyo)sensör geliştirilmesi
Development of (bio)sensor for spermine and spermidine determination
TUĞÇE ÖZMEN DERKUŞ
- Kronik hepatit C hastalarında serum demiri, ferritin, transferrin saturasyonu, karaciğer demir birikimi ile karaciğer histopatolojisi ve viral yük arasındaki ilişkinin değerlendirilmesi
Evaluation of relation between serum iron, ferritin, transferrin saturation, hepatic iron deposition and liver histopatology and, viral load in patients with chronic hepatitis C
MUSTAFA TANRIVERDİ
Tıpta Uzmanlık
Türkçe
2010
Klinik Bakteriyoloji ve Enfeksiyon HastalıklarıGaziantep ÜniversitesiEnfeksiyon Hastalıkları ve Klinik Mikrobiyoloji Ana Bilim Dalı
PROF. DR. MUSTAFA NAMIDURU
- Catalysis with engineered Prussian blue analogues under external bias, light, and magnetic field
Potansiyel, ışık ve manyetik alan altında tasarlanmış Prusya mavisi analogları ile kataliz
RAMADAN CHALIL OGLOU
Yüksek Lisans
İngilizce
2022
Enerjiİhsan Doğramacı Bilkent ÜniversitesiMalzeme Bilimi ve Nanoteknoloji Ana Bilim Dalı
DOÇ. DR. FERDİ KARADAŞ