Underground cable fault tester design and application
Yeraltı kablo arıza test cihazı tasarımı ve uygulaması
- Tez No: 819267
- Danışmanlar: PROF. DR. YÜKSEL OĞUZ, DR. ÖĞR. ÜYESİ TOLGA ÖZER
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Afyon Kocatepe Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 124
Özet
Yer altına serilen kablolarda meydana gelen arızaların tespiti için tüm kablo hattının sökülmesi, kullanıcı ve üretici için zaman ve maliyet kayıplarına sebep olmaktadır. Bu durumun oluşması arızanın kablo üzerindeki tam konumunun bilinmesi mecburiyetini doğurmaktadır. Bu çalışmanın önemi kablo hattının sökülmesine gerek duyulmadan kablodaki arızanın yerinin tespit edilebilmesi ile zaman ve maliyet kazancı sağlanmasıdır. Bu tezin amacı, yer altına indirilen orta gerilim kablolarında oluşabilecek izolasyon zayıflığı, kaçak akım, kısa devre gibi arızaların kablo üzerindeki yerinin tespitinin yapılabilmesi için yüksek gerilim ve enerji sağlayabilecek bir darbe üreteci tasarımıdır. İletim hattına yüksek gerilim ve enerji verebilecek cihazın elektronik donanımının tasarımı, yazılım tasarımı ile cihaz kontrolünün sağlanması ve mekanik yapı ile üretimin yapılmasıdır. Arıza yerinin tespiti için iletim hattına yüksek gerilim uygulanarak verilen bu enerji ile hat üzerinde arızalı bölgede ark oluşumunun sağlanması ve ark sebebiyle ortaya çıkan sesin hassas kulaklıkla dinlenerek takip edilmesi temel alınmıştır. Tasarlanan cihaz şebekeden veya bataryalı sistemlerde invertörden beslenerek, besleme gerilimini transformatör ve gerilim katlama devreleriyle 8kV'a çıkartmıştır. Yükseltilen bu gerilim, yüksek kapasitans ve gerilim seviyeli kondansatörlerde depo edilmiş ve bu sayede enerji seviyesi gerilim seviyesine göre 10000 joule değerine kadar sağlanmaktadır. Cihazın kullanımını kolaylaştırmak amacıyla cihaza nRF modülü eklenerek kullanıcı için tasarlanan kumanda kontrol ünitesi ile cihazın haberleşmesi sağlanmıştır. Kontrol ünitesi 2km'lik çapta cihazı uzaktan kontrol edebilecek şekilde tasarlanmıştır. Aynı amaçla tasarlanan muadil kablo arıza tespit cihazlarından farklı olarak cihazın kullanım ömrünü arttırmak, cihaz bakım masraflarını, işçilik ve kablo bakım/onarım maliyetlerini azaltmak cihazı uzaktan kontrol edebilecek donanım ile mümkün olmuştur. Çıktı olarak cihaz tümüyle üretilmiş ve piyasa kullanımına sunulmuştur. Bu çalışmada 8kV olarak sunulan ark gerilimi ilerleyen çalışmalarda 16kV,32kV gibi seçeneklerin eklenmesiyle artan gerilim sayesinde arıza tespit hattı mesafesinin uzamasıyla daha kapsamlı bir hale getirilebilir. Arıza tespit hat uzunluğunun artmasıyla kullanıcı tarafından sağlanan uzaktan kontrolün haberleşme mesafesi de arttırılabilir. Ek olarak kontrol ünitesine eklenebilecek mesafe bulan“echo algoritması”gibi yazılımsal düzenlemeler ve bu yazılımları destekleyen donanım eklenerek ark sesinin tespitinde kullanılan kulaklık, kaldırılabilir.
Özet (Çeviri)
In this research, dismantling the entire cable line for the detection of faults in cables laid underground causes time and cost losses for the user and the manufacturer. The occurrence of this situation necessitates knowing the exact location of the fault on the cable. The importance of this study is to provide time and cost savings by determining the location of the fault in the cable without the need for dismantling the cable line. The aim of this thessis is to design a pulse generator that can provide high voltage and energy in order to determine the location of faults such as insulation weakness, leakage current, short circuit that may occur in medium voltage cables that are lowered underground. It is the design of the electronic hardware of the device that can provide high voltage and energy to the transmission line, providing the device control with software design and production with the mechanical structure. In order to detect the fault location, it is based on this energy, which is given by applying high voltage to the transmission line, to ensure arc formation in the faulted area on the line and to listen to the sound caused by the arc by listening with sensitive headphones. The designed device is fed from the network or from the inverter in battery systems, and the supply voltage is increased to 8kV with transformer and voltage doubling circuits. This increased voltage is stored in high capacitance and voltage level capacitors, and thus the energy level is provided up to 10000 joules according to the voltage level. In order to facilitate the use of the device, an nRF module was added to the device, enabling the device to communicate with the control unit designed for the user. The control unit is designed to be able to remotely control the device with a diameter of 2 km. Unlike equivalent cable fault detection devices designed for the same purpose, it has been possible to increase the service life of the device, to reduce device maintenance costs, labor and cable maintenance/repair costs, with hardware that can remotely control the device. As an output, the device has been completely produced and presented to the market. The arc voltage, which is presented as 8kV in this study, can be made more comprehensive by extending the distance of the fault detection line, thanks to the increased voltage with the addition of options such as 16kV, 32kV in future studies. By increasing the fault detection line length, the communication distance of the remote control provided by the user can also be increased. In addition, software arrangements such as the echo algorithm that can be added to the control unit and the hardware that supports these software can be added, and the earphones used in the detection of arc sound can be removed.
Benzer Tezler
- Ekstra yüksek gerilim yeraltı kablo eklerinin optimal tasarımı ve deneysel analizi
Optimal design and experimental analysis of extra high voltage underground cable joints
ÇAĞRI KÖKSAL
Doktora
Türkçe
2023
Elektrik ve Elektronik Mühendisliğiİstanbul Üniversitesi-CerrahpaşaElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. AYSEL ERSOY
DOÇ. DR. EMRAH DOKUR
- Karma iletim hatlarında mesafe koruma rölesi çalışmasının incelenmesi ve çalışma başarımlarının yükseltilmesi
Investigation of distance protection relay operation in mixed transmission lines and improving operation performans
SERKAN BUDAK
Yüksek Lisans
Türkçe
2020
Elektrik ve Elektronik MühendisliğiKonya Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. BAHADIR AKBAL
- Etkin topraklanmayan şebekelerde koruma ve koordinasyon
Protection and coordnation in non-effectively grounded systems
MERT BEKİR ATSEVER
Yüksek Lisans
Türkçe
2019
Elektrik ve Elektronik MühendisliğiGebze Teknik ÜniversitesiElektronik Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET HAKAN HOCAOĞLU
- Alternatif ve darbe yüksek gerilimleri ile yaşlandırılmış orta gerilim yeraltı kablolarının performans analizi
Performance analysis of medium voltage underground cables aged with alternating and impulse high voltages
CİHAT ÇAĞDAŞ UYDUR
Doktora
Türkçe
2021
Elektrik ve Elektronik MühendisliğiYıldız Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
DOÇ. DR. OKTAY ARIKAN
- Yer altı kablolarında arıza yeri tespiti
Fault location at underground cables
MURAT TEKİN
Yüksek Lisans
Türkçe
2006
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
DOÇ.DR. ÖZCAN KALENDERLİ