Total diz artroplastisinde patellar komponent tespitinde farklı çimentolama tekniklerinin karşılaştırılması, biyomekanik çalışma
Comparison of different cementing techniques of patellar component fixation in total knee arthroplasty, biomechanical study
- Tez No: 842307
- Danışmanlar: PROF. DR. TEOMAN ATICI
- Tez Türü: Tıpta Uzmanlık
- Konular: Ortopedi ve Travmatoloji, Orthopedics and Traumatology
- Anahtar Kelimeler: Artroplasti, Biyomekanik, Diz, Diz eklemi, Diz protezi, Kemik çimentoları, Patella, Arthroplasty, Biomechanics, Knee, Knee joint, Knee prosthesis, Bone cements, Patella
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Bursa Uludağ Üniversitesi
- Enstitü: Tıp Fakültesi
- Ana Bilim Dalı: Ortopedi ve Travmatoloji Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Amaç: Bu çalışmada patellar komponent tespitinde farklı çimentolama tekniklerinin biyomekanik olarak karşılaştırılması amaçlandı. Gereç ve Yöntem: Sentetik patellar kemik modelinde (Selbones© Araştırma Laboratuvarı, Kayseri, Türkiye), tamamı polietilen üniversal kubbe patellar komponentin (Trauson® universal dome, Stryker, Changzhou, Çin), kemik çimentosu (Surgical Simplex® P, Stryker, Limerick, İrlanda) kullanılarak implantasyonu uygulandı. Test örnekleri çimentolama tekniğine göre üç gruba ayrıldı. Grup 1“parsiyel çimentolama”, Grup 2“tam çimentolama”, Grup 3“modifikasyon”tekniği olarak isimlendirildi. Materyallerin tespiti sonrası fiksasyonun gücü, Çekme basma test makinesi (UVE, Bursa-Türkiye) kullanılarak üretilen izole makasla kuvveti uygulanarak biyomekanik olarak test edildi. Hangi çimentolama tekniğinin en iyi fiksasyon gücünü sağladığını belirlemek için eğriler ve tepe stres basınçları analiz edildi. Elde edilen değerler istatistiksel olarak karşılaştırıldı. Bulgular: Toplam 30 adet test örneğinin tepe stres basınç ortalaması 1305,86 (±24,72) N (Newton) olup bu değerler grup 1, grup 2 ve grup 3 için sırasıyla 1013,00 (±24,72), 1334,60 (±37,17) ve 1570,00 (±26,56) N olarak tespit edildi (p<0,001). Karşılaştırmada anlamlı fark bulunması nedeniyle tüm grupların birbiriyle yapılan çoklu karşılaştırmalarında istatistiksel olarak anlamlı farklılık saptandı (p<0,001). Sonuç: Modifikasyon çimentolama tekniğinin total diz artroplastisinde (TDA) patellar komponentin çimento ile tespitinde komponentin stabilizasyonuna katkı sağlayacağı tespit edildi. Stabilizasyonun desteklenmesi ile modifikasyon çimentolama tekniğinin patellar komponent kaynaklı komplikasyon görülme sıklığını azaltacağı kanısına varıldı. Sentetik patellar kemik modelinin in vitro artroplasti çalışmalarında kullanılabilir bir model olduğu öngörüldü. Buna ek olarak 50 cc enjektör kullanılması, mevcut pazarlanan uygulama sistemlerine kıyasla daha ulaşılabilir, az maliyetli ve pratik bir çimento uygulama tekniği olan bu yöntem ile elde edilen in vitro olumlu sonuçların ileri klinik çalışmalarla değerlendirilmesi amaçlandı. İleriki çalışmalarda sentetik patellar kemik modellerinin kadavra modelleri ile karşılaştırılması, patellar komponent çimentolamasında geliştirilen modifikasyonların maliyet-yarar analizi yapılması planlandı.
Özet (Çeviri)
Purpose: The aim of this study was to biomechanically compare different cementing techniques for patellar component fixation. Material and Methods: Synthetic patellar bone model (Selbones© Research Laboratory, Kayseri, Turkey) was implanted with an all-polyethylene universal dome patellar component (Trauson® universal dome, Stryker, Changzhou, China) using bone cement (Surgical Simplex® P, Stryker, Limerick, Ireland). The test specimens were divided into three groups according to the cementing technique. Group 1 was named as“partial cementing”, Group 2 as“full cementing”and Group 3 as“modification”technique. After fixation of the materials, the strength of fixation was tested biomechanically by applying force with isolated scissors produced using a tensile compression testing machine (UVE, Bursa-Turkey). Curves and peak stress pressures were analyzed to determine which cementing technique provided the best fixation strength. The values obtained were statistically compared. Results: The mean peak stress pressure of a total of 30 test specimens was 1305.86 (±24.72) N (Newton) and these values were determined as 1013.00 (±24.72), 1334.60 (±37.17) and 1570.00 (±26.56) N for group 1, group 2 and group 3, respectively (p<0.001). A statistically significant difference was found in the multiple comparisons of all groups with each other (p<0.001). Conclusion: It was determined that the modification cementing technique would contribute to the stabilization of the component in cement fixation of the patellar component in total knee arthroplasty (TKA). It was concluded that the modification cementing technique will reduce the incidence of patellar component-related complications by supporting stabilization. The synthetic patellar bone model was predicted to be a usable model for in vitro arthroplasty studies. In addition, it was aimed to evaluate the positive in vitro results obtained with this method, which is a more accessible, less costly and practical cement application technique compared to the currently marketed application systems by using a 50 cc injector, in further clinical studies. In future studies, comparison of synthetic patellar bone models with cadaveric models and cost-benefit analysis of modifications developed in patellar component cementing were planned.
Benzer Tezler
- Patella morfolojisinin total diz protezinin sonuçlarına etkisi
Effect of patella morphology on the results of total knee arthroplasty
ALİRIZA ALTUNCU
Tıpta Uzmanlık
Türkçe
2024
Ortopedi ve TravmatolojiZonguldak Bülent Ecevit ÜniversitesiOrtopedi ve Travmatoloji Ana Bilim Dalı
PROF. DR. SELÇUK KESER
- Akagi çizgisinin patellofemoral dizilim bozukluğu olan hastalarda tibial komponent rotasyonunu belirlemede güvenilirliği
Reliability of the akagi line in determining tibial component rotation in patients with patellofemoral disorder
MEHMET BARIŞ ERTAN
Tıpta Uzmanlık
Türkçe
2022
Ortopedi ve TravmatolojiSağlık Bilimleri ÜniversitesiOrtopedi ve Travmatoloji Ana Bilim Dalı
DOÇ. DR. ÖZKAN KÖSE
- Total diz protezi uygulamalarımız ve patellofemoral eklem sorunları
Total knee arthroplasty and patello femoral complications in our series
TUNÇ CEVAT ÖĞÜN
Tıpta Uzmanlık
Türkçe
1996
Ortopedi ve TravmatolojiAnkara ÜniversitesiOrtopedi ve Travmatoloji Ana Bilim Dalı
PROF. DR. İLKER ÇETİN
- Diz protezlerinde patellar yüksekliğin klinik sonuçlara etkisi
The effect of patellar height on clinical outcomes after total knee arthroplasty
MEHMET METİN BOYACIOĞLU
Tıpta Uzmanlık
Türkçe
2021
Ortopedi ve TravmatolojiSağlık Bilimleri ÜniversitesiOrtopedi ve Travmatoloji Ana Bilim Dalı
UZMAN RAFFİ ARMAĞAN
UZMAN NECMİ CAM
- Total diz artroplastisinde tibial komponentin sagital konumunun patellofemoral eklem üzerine etkisinin klinik ve radyolojik olarak incelenmesi
Clinical and radiological investigation of the effect of the sagital location of the tibial component on the patellofemoral joint in total knee artroplasty
SAMET BAYRAM
Tıpta Uzmanlık
Türkçe
2018
Ortopedi ve TravmatolojiSağlık Bilimleri ÜniversitesiOrtopedi ve Travmatoloji Ana Bilim Dalı
PROF. DR. HASAN BOMBACI