Geri Dön

Hücresel üretim sistemi yaklaşımıyla pres hattı yükleme ve üretim çevrim periyodu optimizasyonu üzerine bir modelleme

A Modelling about the optimisation of the production cycle period and the stamp line loading with the approach of the cell production system

  1. Tez No: 84467
  2. Yazar: YÜCEL CAN
  3. Danışmanlar: PROF. DR. SONER ALANYALI
  4. Tez Türü: Doktora
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 1999
  8. Dil: Türkçe
  9. Üniversite: Eskişehir Osmangazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 208

Özet

IV ÖZET Bir imalat işletmesinin temel amacı, düşünülen mamullerin imalatını gerçekleştirmektir. Ancak bu işin, yüksek verimlilik ve düşük maliyetlerle yapılması büyük önem taşır. Bu nedenle de, işletmenin örgütlenmesi ve tüm fonksiyonların işleyişi yüksek verimliliği ve düşük maliyetleri sağlayacak biçimde bir hedefe yönelmelidir. Bir işletmede, verimliliği arttırıcı ve maliyetleri düşürücü yöntemlerden birisi de, Hücresel Üretim Sistemi ile çevrim periyodu optimizasyonunun uygulanmasıdır. Bu çalışmanın birinci bölümünde, mevcut üretim sistemleri ve üretim bileşenleri konusu incelenmiştir. ikinci bölümünde, Hücresel Üretim Sistemleri ve Grup teknolojisi üzerine literatürde yer alan bilgiler aktarılmıştır. Üçüncü bölümde, çalışma konusunun uygulama alanı olan Pres Atelyesinde gerçekleştirilen presleme işlemi ve üretim zamanları analizi yapılmıştır. Dördüncü ve beşinci bölümde, Hücresel Üretim Sistemi Yaklaşımı ile Pres Hattı Yükleme ve Üretim Çevrim Periyodu Optimizasyonu Modeli incelenmiştir. Altıncı bölümde, Hücresel Üretim Sistemi ile Pres Hattı Yükleme ve Üretim Çevrim Periyodu Optimizasyonu modelinin, bir otomobil fabrikasına uygulanması incelenmiştir. Son bölümde ise, Pres atelyesinde güncel olarak uygulanan mevcut üretim modeli ile çalışmanın ana temasını oluşturan önerilen modelin karşılaştırması yapılmıştır. Bundan başka, önerilen üretim modeli ile ilgili sonuçlar yorumlanmıştır. Anahtar kelimeler : yatırım maliyeti, çevrim periyodu optimizasyonu, üretim maliyeti, ürün stok alanı, hat yükleme, verimlilik, parça atama, grup teknolojisi, hücresel üretim

Özet (Çeviri)

SUMMARY The main objective of a production company is to manufacture a product. The low cost and high efficiency rate are very important factors in the production. Also for this reason, the company must be very well organized and also each unit must have a sensibility of knowledge about low cost and high efficiency. Also, in a production company, one of the ways to increase the rate of efficiency and to reduce the costs is to perform the cell production system together with the optimisation of the cycle period. In the first part of this study, the current production systems and the elements of the production are observed. In the second part of this study, the information is given on about the cell production systems and also about the group technology. In the third part of the study, the experiment is carried out on the stamping analysis operation and the time study analysis. In the fourth and the fifth part of this study, approach with cell production system, stamp line loading and production cycle period optimisation model is proposed. In the sixth part, the model of cell production system, stamp line loading and production cycle period optimisation in an automobile plant in which the body is mounted from sheet plates are examined. In the final part, the comparison is done in the stamping shop between the model is being manufactured and the model is being proposed which the study constitute. The comments and the discussions are also included at the end about the model is being proposed. Key words : Investment cost, Cycle period optimisation, Production cost, The area of the product stock, Line ( cell ) loading, Effiency, Product appointment, Groupe technology, Cell production system

Benzer Tezler

  1. Tam zamanında üretim ortamında fabrika içi döngüsel tedarik sistemi için çakışmasız rota optimizasyonu: Matematiksel model ve mat-sezgisel çözüm önerisi

    Conflict-free route optimization for in-plant milk run supply system in just-in-time production environment: Mathematical model and mat-heuristic solution proposal

    ALİ İHSAN BOYACI

    Doktora

    Türkçe

    Türkçe

    2023

    Endüstri ve Endüstri MühendisliğiKocaeli Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    PROF. DR. ALPASLAN FIĞLALI

    DOÇ. DR. KASIM BAYNAL

  2. Reducing pre-production lead time and cost through value stream mapping and the cut-to-box system: A footwear industry study

    Değer akış haritalama ve kesimden paketleme sistemi ile ön üretim temin süresinin ve maliyetinin azaltılması: Bir ayakkabı endüstrisinde çalışma

    FARNAZ GHORBANPOUR BAKHSHAYESH

    Yüksek Lisans

    İngilizce

    İngilizce

    2024

    Endüstri ve Endüstri Mühendisliğiİstanbul Teknik Üniversitesi

    Endüstri Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET BÜLENT DURMUŞOĞLU

  3. System agency for bottom-up design: The use of computational design systems for Middle Eastern architecture

    Tümevarımcı tasarım için sistem modeli: Hesaplamalı tasarım sistemlerinin Ortadoğu mimarlığındaki kullanımı

    NOUR ABUZAID

    Yüksek Lisans

    İngilizce

    İngilizce

    2018

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. MERYEM BİRGÜL ÇOLAKOĞLU

  4. Mikroalglerden biyojenik nanopartiküllerin sentezlenmesi ve kullanım potansiyelinin araştırılması

    Synthesis of biogenic nanoparticles by microalgae and investigation of potential use

    GÜLİZAR ÇALIŞKAN

    Doktora

    Türkçe

    Türkçe

    2020

    Bilim ve TeknolojiEge Üniversitesi

    Biyomühendislik Ana Bilim Dalı

    PROF. DR. MURAT ELİBOL

  5. Gaz köpüklendirme yöntemi kullanılarak polietilen glikol bazlı doku iskelelerinin sentezi

    Synthesis of polyethylene glycol based scaffolds using gas foaming method

    BEGÜM AYTUĞRUL

    Yüksek Lisans

    Türkçe

    Türkçe

    2016

    BiyomühendislikYıldız Teknik Üniversitesi

    Biyomühendislik Ana Bilim Dalı

    YRD. DOÇ. DR. MEHMET MURAT ÖZMEN