Kontrollü yük vermeyi sağlayan medikal akıllı tabanlık tasarımı
Design of medical intelligent insoles provide controlled loading
- Tez No: 865185
- Danışmanlar: DOÇ. DR. TEOMAN KARADAĞ
- Tez Türü: Yüksek Lisans
- Konular: Fiziksel Tıp ve Rehabilitasyon, Physical Medicine and Rehabilitation
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: İnönü Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Elektronik Bilim Dalı
- Sayfa Sayısı: 87
Özet
Nesnelerin interneti kavramı ile birçok alanda insan gücüne gerek duymadan yaşamı kolaylaştıran internete ve cihaza bağlı yeni teknolojik fikirleri ortaya çıkmaktadır. Bu sayede hem günlük yaşamda kullanıma uygun, pratik ve küçük cihazlar üretilmektedir. Bu cihazlar ile hem veri takibi yapılmakta hemde cihazın verimliliği sayesinde kullanılan alanlarda da hızlı ve sürdürülebilir gelişmeler elde edilmektedir. Bu çalışmada nesnelerin internetinin giyilebilir teknolojide kullanılarak akıllı tabanlık tasarımı ve kullanımı yer almaktadır. Tabanlık ile rehabilitasyon ve yürüme sorunu yaşadıktan sonra iyileşme sürecine giren hastaların yürümeleri kolaylaşmaktadır. Tabanlıkta kullanılacak basınç sensörleri ile kullanıcının ayak tabanındaki basıncı ölçülmektedir. Tasarlamış olduğumuz kart ile tabanlığı kullanan kişiye sesli, görsel ve titreşimli geri bildirim sunulmaktadır. Geri bildirim ise sadece zemine olması gerekenden fazla basınç uygulandığında sağlanmaktadır. Böylece tabanlığı kullanan hasta zemine uyguladığı basınç değerinin ne oranda olduğunu tahmin edebilecek ve iyileşmesini kolaylaştırmak için bu geri bildirimlere göre hareketine devam edecektir. Yapılan çalışma ile hastaların iyileşme süreci hızlandırılmakta, veri kaydı sayesinde geriye dönük kontroller yapılmakta ve tedaviden sorumlu doktorun hakları da korunmaktadır.
Özet (Çeviri)
With the concept of the Internet of Things, new technological ideas related to the Internet and devices that make life easier in many areas without the need for human power are emerging. In this way, practical and small devices suitable for use in daily life are produced. With these devices, data is monitored and rapid and sustainable developments are achieved in the areas used thanks to the efficiency of the device. This study covers the design and use of smart insoles by using the internet of things in wearable technology. With the insoles, it is easier for the patients who are in the recovery process after experiencing rehabilitation and walking problems to walk. With the pressure sensors to be used in the insoles, the pressure on the sole of the user's foot is measured. Audible, visual and vibratory feedback is provided to the person using the insoles with the card we have designed. Feedback is provided only when more pressure is applied to the ground than it should be. Thus, the patient using the insoles will be able to estimate the amount of pressure applied to the floor and will continue to act according to these feedbacks to facilitate recovery. With the study, the recovery process of the patients is accelerated, retrospective controls are carried out thanks to the data recording, and the rights of the doctor responsible for the treatment are protected.
Benzer Tezler
- Capacity analysis on multi-lane roundabouts: An evaluation with HCM 2010 capacity model
Çok şeritli döner kavşakların kapasite analizleri: HCM 2010 üzerine bir değerlendirme
MELİKE ERSOY
Yüksek Lisans
İngilizce
2012
Trafikİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. HİLMİ BERK ÇELİKOĞLU
- Joint server and route selection in SDN networks
SDN ağlarda ortak yol ve sunucu seçimi
HASAN ANIL AKYILDIZ
Yüksek Lisans
İngilizce
2017
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. HAKAN ALİ ÇIRPAN
- Production of carbon nanotube reinforced nanoprepregs and their characterization
Karbon nanotüp takviyeli nanoprepreglerin geliştirilmesi ve karakterizasyonu
BEYZA BOZALİ
Yüksek Lisans
İngilizce
2018
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ELİF ÖZDEN YENİGÜN
- Giydirme cepheler için uzman görüşü değerlendirme yöntemi ile bütünlenmiş bir analiz aracı önerisi
An analysis tool proposal integrated with expert judgment method for the analysis of curtain wall
BEYZA TERZİOĞLU
Yüksek Lisans
Türkçe
2020
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MEHMET CEM ALTUN
- Esnek manipülatörün modellenmesi ve kontrolü
Modelling and control of flexible manipulator
BERKAN HIZARCI
Yüksek Lisans
Türkçe
2019
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERHAT İKİZOĞLU