CBS tabanlı otonom burgu robotu prototipinin geliştirilmesi üzerine bir araştırma
A research on the development of GİS-based autonomous auger robot prototype
- Tez No: 901099
- Danışmanlar: DOÇ. DR. İLKER ÜNAL
- Tez Türü: Doktora
- Konular: Elektrik ve Elektronik Mühendisliği, Mekatronik Mühendisliği, Ziraat, Electrical and Electronics Engineering, Mechatronics Engineering, Agriculture
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2024
- Dil: Türkçe
- Üniversite: Akdeniz Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Uzaktan Algılama ve Coğrafi Bilgi Sistemleri Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 136
Özet
Bu çalışmada, meyve bahçelerinde dikim çukurlarının açılmasını otonom olarak gerçekleştirebilen, CBS (Coğrafi Bilgi Sistemleri) tabanlı otonom bir burgu robotu geliştirilmiştir. Tarımsal mobil robot, diferansiyel yönlendirme sistemi ve sabit hedef pozisyonlara ilerleyebilme yeteneği ile donatılmış, dört tekerlekli ve holonomik olmayan bir yapıya sahiptir. Tasarlanan mobil robot, tamamen otonom, yarı otonom veya tamamen manuel modlarda kullanılabilme özelliğine sahiptir. Redüktörlü DC motorla tahrik edilen y ekseni kaydırıcıdan oluşan çukur açma sistemi, 2.1 HP benzinli motora sahip bir burgu içermektedir. Mobil robot ve çukur açma sisteminin tasarımı ve modellemesi, SOLIDWORKS 2020 yazılımı kullanılarak gerçekleştirilmiştir. Robot navigasyon sistemi ve delme mekanizması yazılımının oluşturulmasında Microsoft Visual Basic.NET programlama dili kullanılmıştır. Mobil robotun istenen noktaya yönlendirilmesinde, mevcut konumun hedefe olan mesafesi ile heading ve azimut açıları kullanılmaktadır. hedef nokta için herhangi bir ortamdan gönderilen koordinatlar, hedefin enlem ve boylam bilgilerini içermektedir. Robotun kendi koordinat verileri ve heading açı değerleri ile belirlenen hedef noktanın koordinatları arasındaki matematiksel ilişkiye dayanarak yönlendirme işlemi yapılmaktadır. Robotun heading açısı, hedefin azimut açısı ve iki nokta arasındaki mesafe, endüstriyel bilgisayarda çalışan yazılım tarafından anlık olarak hesaplanmaktadır. Heading ve azimut açıları eşitlenene kadar robot, hedef noktaya doğru yönünü ayarlamaktadır. Geliştirilen yazılım, mobil robotun üzerine endüstriyel bilgisayarın yerleştirilmesine olanak tanımaktadır. Böylece, internet bağlantısı üzerinden robot uzaktan izlenebilmekte ve kontrol edilebilmektedir. Gerçek ve istenen çukur konumları arasındaki mesafeleri belirleyen çapraz iz hatası (XTE), mobil robotun çukur açma noktalarına yönlendirme doğruluğunu analiz etmek için kullanılmıştır. Sonuç olarak mobil robotun konum hassasiyetinin aritmetik ortalaması 4.35 cm, standart sapması ise 1.73 cm olarak belirlenmiştir. Bu değerler, önerilen sistemin meyve bahçelerinde fide çukuru açılmasında etkili ve kullanılabilir olduğunu göstermektedir. Literatürde, otonom çukur açma ile ilgili benzer bir çalışmaya rastlanmamış olup, bu çalışmanın tarımsal robotik alanına özgün bir katkı sunduğu düşünülmektedir.
Özet (Çeviri)
In this study, a GIS (Geographic Information Systems)-based autonomous auger robot capable of autonomously digging planting holes in orchards was developed. The agricultural mobile robot is equipped with a differential steering system and has the ability to advance towards fixed target positions. It has a four-wheeled, non-holonomic structure. The designed mobile robot can be used in fully autonomous, semi-autonomous, or fully manual modes. The hole-digging system, driven by a DC motor with a gearbox, consists of a sliding mechanism along the y-axis and an auger powered by a 2.1 HP gasoline engine. The design and modeling of the mobile robot and the hole-digging system were carried out using SOLIDWORKS 2020 software. Microsoft Visual Basic.NET programming language was used in the development of the robot's navigation system and drilling mechanism software. To guide the mobile robot to the desired point, the distance between the current position and the target, along with the heading and azimuth angles, are utilized. The coordinates sent from any environment for the target point contain the latitude and longitude information of the target. The navigation process is carried out based on the mathematical relationship between the robot's own coordinate data, the heading angle values, and the coordinates of the determined target point. The robot's heading angle, the azimuth angle of the target, and the distance between the two points are calculated in real-time by the software running on an industrial computer. The robot adjusts its direction towards the target point until the heading and azimuth angles align. The developed software allows an industrial computer to be installed on the mobile robot. Thus, the robot can be monitored and controlled remotely via an internet connection. The cross-track error (XTE), which determines the distances between the actual and desired hole positions, was used to analyze the accuracy of the mobile robot's navigation to the hole-digging points. As a result, the average positional accuracy of the mobile robot was determined to be 4.35 cm, with a standard deviation of 1.73 cm. These values demonstrate that the proposed system is effective and usable for digging seedling holes in orchards. No similar study related to autonomous hole-digging has been encountered in the literature, and it is believed that this study makes a unique contribution to the field of agricultural robotics.
Benzer Tezler
- Simulation modeling of maritime piracy using hybrid agent based and discrete event simulation
Etmen tabanlı ve kesikli olay benzetimi kullanan melez bir deniz haydutluğu benzetim modeli
ALİ EMRE VAROL
Yüksek Lisans
İngilizce
2012
Endüstri ve Endüstri MühendisliğiDeniz Harp Okulu KomutanlığıEndüstri Mühendisliği Bölümü
YRD. DOÇ. DR. M.MURAT GÜNAL
- Planning transportation of forest products by using GIS based decision support system
CBS tabanlı karar destek sistemi ile orman ürünleri nakliyatının planlanması
ASO AZAD HAJI KAKOL
Yüksek Lisans
İngilizce
2014
BiyomühendislikKahramanmaraş Sütçü İmam ÜniversitesiBiyomühendislik ve Bilimleri Ana Bilim Dalı
PROF. DR. ABDULLAH EMİN AKAY
- CBS tabanlı görünürlük analizlerinin şehir planlama süreçlerine entegrasyonu
Integration of GIS based visibility analysis into urban planning process
HATEM K.M. ABUAZAB
Yüksek Lisans
Türkçe
2021
Mühendislik BilimleriKonya Teknik ÜniversitesiŞehir ve Bölge Planlama Ana Bilim Dalı
DOÇ. DR. MEHMET TOPÇU
- CBS tabanlı bir yerleşke donatı bilgi sisteminin (YEDBİS) oluşturulması: Kafkas Üniversitesi Şehitler Yerleşkesi örneği
Forming a CBS based campus equipment information system (YEDBIS): A sample of Kafkas University, Şehitler Campus
ÖZLEM BURCU AKSOY
Yüksek Lisans
Türkçe
2021
Peyzaj MimarlığıAtatürk ÜniversitesiPeyzaj Mimarlığı Ana Bilim Dalı
PROF. DR. METİN DEMİR
- CBS tabanlı makine öğrenme teknikleri ile toplu taşınmaz değerlemesi
Mass real estate valuation by GIS-based machine learning techniques
SÜLEYMAN ŞİŞMAN
Yüksek Lisans
Türkçe
2021
Jeodezi ve FotogrametriGebze Teknik ÜniversitesiHarita Mühendisliği Ana Bilim Dalı
PROF. DR. ARİF ÇAĞDAŞ AYDINOĞLU