Hassas kesme kalıplarında kesme olayını etkileyen faktörlerin incelenmesi
The Examining factors that effects the cutting principle in fine blanking
- Tez No: 90944
- Danışmanlar: DOÇ. DR. FEHİM FINDIK
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1999
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 73
Özet
ÖZET
Özet (Çeviri)
THE EXAMINING FACTORS THAT EFFECTS THE CUTTING PRINCIPLE IN FINE BLANKING SUMMARY Fine Blanking design is very important in Industry. It is applied for many part which is used in daily life. In order to produce parts in short time, to do economy from the materials and labour, die design is especially used. To decrease the prices materials is very important. Using the fine blanking design is, One of the method to do that. Decorative materials, kitchen appliances, textile machines, dentist appliances, electronic devices and even plastic stuffs can be produced by means of that method, without machining. In the pressing production sector, according to other conventional methods fine blanking is a new production technology. By this method, a finished piece with flat surface can be produced by only one operation. It is not necessary to make second and third operations. Because of this fine blanking is so economical production method. Fine blanking has wide using region. Having a little number of operation., producing finished piece for fitting, economical workmanship, cost and energy, cutting of every kind of material until 20mm; are some reasons of the preferring fine blanking. By this matters, fine blanking can reply all the requirements of the modern technology. The fine blanking system contains, matrix, manual plate, punch, a cutting space about %0,5 of the material thickness and a V-press ring that keeps material fixed. By means of these principles fine banking has taken its suitable place in the sector.
Benzer Tezler
- Kalıp endüstrisinde üretilen bir hassas kesme kalıbının tasarımı
The die endustry to produce fine blanking dies desing
METİN ŞAHİN
Yüksek Lisans
Türkçe
1999
Eğitim ve ÖğretimSakarya ÜniversitesiMakine Eğitimi Ana Bilim Dalı
DOÇ. DR. FEHİM FINDIK
- Kalıp malzemesine uygulanan ısıl işlem ve yüzey kaplamalarının sac şekillendirmeye etkileri
The effects of heat treatments and surface coatings applied to the tool material on sheet forming
RABİA EDİS
Yüksek Lisans
Türkçe
2022
Makine MühendisliğiKocaeli ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. TAMER SINMAZÇELİK
- Sac ve kalıp malzemeleri için modüler sürtünme ve aşınma test cihazı tasarımı
Design of modular friction and wear tester for sheet and mold materials
YASİN DOĞAN
Yüksek Lisans
Türkçe
2023
Makine MühendisliğiKocaeli ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALPAY TAMER ERTÜRK
- Alaşımsız ve düşük alaşımlı çeliklerde küreselleştirme ısıl işleminin optimizasyonu ve hassas kesme işlemine etkisi
Optimization of spheroidizing heat treatment in unalloyed and low alloyed steels and its effect on fine blanking process
AKIN KÜTMEN
Yüksek Lisans
Türkçe
2022
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. MURAT BAYDOĞAN
- Hassas kesme ve kalıpları
Başlık çevirisi yok
Ü.BAHAR DARICI
Yüksek Lisans
Türkçe
1998
Makine Mühendisliğiİstanbul Teknik Üniversitesiİmalat Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET DEMİRKOL