Katı oksit yakıt pilleri için özgün mikrotüp hücre geliştirilmesi
Development of novel microtubular solid oxide fuel cells
- Tez No: 940000
- Danışmanlar: PROF. DR. BORA TİMURKUTLUK
- Tez Türü: Yüksek Lisans
- Konular: Enerji, Makine Mühendisliği, Energy, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Niğde Ömer Halisdemir Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 74
Özet
Bu tez çalışmasında anot destek tabakası üzerinde oluşturulan farklı desenlerle elektrolit-elektrot ara yüzey alanı artırılmış özgün bir mikrotüp katı oksit yakıt pili üretimi başarı ile tamamlamıştır. Mikrotüp anot destekler, geleneksel yöntemlerin aksine şerit döküm yöntemi ile üretilen anot destek şeridinin desenli bir polivinil alkol (PVA) kalıba sarılması ve ardından izostatik presleme ile lamine edilmesiyle üretilmiştir. Ön bir sinterleme işleminden sonra anot destek üzerine daldırma kaplama yöntemi ile diğer hücre bileşenleri uygun sırayla kaplanmış ve sinterlenmiştir. Desenlerin hücre performansına olan etkisinin incelenmesi amacıyla farklı geometrilerde desenlere sahip hücreler üretilmiş ve test edilmiştir. Bu hücreler arasında 300 μm kalınlıkta dökülen 15 cm uzunluğundaki bir anot destek şeridinin; merkezleri arasında 2,8 mm uzaklık olan 2 mm çap ve 0,4 mm derinliğe sahip çukur desenleriyle üretilmiş PVA kalıba sarılması ile üretilen anot desteğe sahip hücre, 800 ºC sıcaklığında 0,421 W/cm2 en yüksek tepe güç yoğunluğu sergilemiştir. Artan elektrot-elektrolit arayüzey alanları sayesinde bu özgün hücre, benzer yöntemlerle üretilen standart hücreye göre ~%85 performans artışı ortaya koymuştur.
Özet (Çeviri)
In this thesis, an innovative microtubular solid oxide fuel cell with enhanced electrolyte-electrode interfacial area achieved through various patterns designed on the anode support layer is successfully fabricated. Different from conventional methods, microtubular anode supports are manufactured using a novel approach, involving the wrapping of an anode support tape, produced by tape casting, around a patterned PVA mold, followed by lamination through isostatic pressing. After pre-sintering process, the other cell components are sequentially coated onto the anode supports using the dip-coating method and subsequently sintered. To investigate the effect of patterns on cell performance, cells with different geometrical patterns are fabricated and tested. Among them, the one produced by wrapping a 300 μm-thick and 15 cm-long anode support tape around a PVA mold featuring dimple patterns with a diameter of 2 mm, a depth of 0.4 mm, and a center-to-center distance of 2.8 mm exhibits the highest peak power density of 0.421 W/cm2 at 800 °C. This novel cell demonstrates a ~85% performance improvement compared to a standard cell produced using similar methods, due to the increased electrode-electrolyte interfacial areas.
Benzer Tezler
- Katı oksit yakıt pilleri için özgün yassı tüp hücre geliştirilmesi
Development of flat-tubular solid oxide fuel cells via mold casting
KEREMHAN BİLGİL
Yüksek Lisans
Türkçe
2025
EnerjiNiğde Ömer Halisdemir ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. BORA TİMURKUTLUK
- Thermal plasma synthesis of LSC-113/LSC-214composite cathode for it-sofcs
Termal plazma ile orta sıcaklık katı oksit yakıt pilleri için LSC-113/LSC-214 kompozit katod üretimi
HAVVA EDA AYSAL
Yüksek Lisans
İngilizce
2019
Metalurji MühendisliğiOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. TAYFUR ÖZTÜRK
- Hidrojen yakıtlı katı oksit yakıt hücrelerinde katot ve anot yüzeylerine uygulanan katkı ve ince film kaplamaların çoklu fizik tabanlı incelenmesi
Multiple physics-based investigation of additives and thin film coatings applied to cathode and anode surfaces in hydrogen-fuelled solid oxide fuel cells
RAMAZAN BURAK ÖTGÜN
Yüksek Lisans
Türkçe
2025
EnerjiEskişehir Teknik Üniversitesiİleri Enerji Teknolojileri Ana Bilim Dalı
PROF. DR. ÖZLEM ONAY
- Modeling of a solid oxide fuel cell and its integration with a biomass gasification System
Katı oksit yakıt pilinin modellenmesi ve biyokütle gazlaştırma sistemi ile entegrasyonu
ANIL ERDOĞAN
Doktora
İngilizce
2022
EnerjiDokuz Eylül ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. CAN ÖZGÜR ÇOLPAN
- Yeni mono ve bis ftalosiyaninlerin sentezi ve özelliklerinin incelenmesi
Synthesis and investigation of properties of novel mono and bis phthalocyanines
GÜLŞAH GÜMRÜKÇÜ