Kimyasal püskürtme yöntemiyle elde edilen InP ince filmlerinin elektrik, optik ve yapısal özelliklerinin incelenmesi
Investigation of the electrical, optical and structural properties of the InP thin films obtained by spraying pyrolysis method
- Tez No: 167928
- Danışmanlar: PROF.DR. REFİK KAYALI
- Tez Türü: Yüksek Lisans
- Konular: Fizik ve Fizik Mühendisliği, Physics and Physics Engineering
- Anahtar Kelimeler: püskürtme yöntemi, elektrik ve optik özellikler, ince filmler m, InP, spraying pyrolysis method, electrical and optical properties, thin films IV
- Yıl: 2005
- Dil: Türkçe
- Üniversite: Niğde Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Fizik Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
ÖZET KİMYASAL PÜSKÜRTME YÖNTEMİYLE ELDE EDİLEN InP İNCE PİMLERİNİN ELEKTRİK, OPTİK VE YAPISAL ÖZELLİKLERİNİN İNCELENMESİ AKSOY, Funda Niğde Üniversitesi Fen Bilimleri Enstitüsü Fizik Anabilim Dalı Danışman : Prof. Dr. Refik KAYALI Temmuz 2005, 67 sayfa Değişik oranlarda alman InCl3 ve Na2HP04 ile hazırlanan eriyikler kullanılarak püskürtme yöntemi ile değişik taban sıcaklıklarında kuvars cam alttabanlar üzerine oluşturulan amorf InP ince filmlerinin elektriksel, optik ve yapısal özellikleri; dört nokta yöntemi, Hail mobilite deneyi, UV spektrometresi, XRD ve SEM gibi ölçüm yöntemleri ile incelendi. Dört nokta yöntemiyle, aynı alt taban sıcaklığında farklı oranlarda hazırlanan iki ince film örneğinin karanlıktaki elde edilen özdirenç değerleri 6.25xl04 ve 19.11xl04 Q-cm ve ışık allında elde edilen değerleri de 5.74xl04 ve 12.57xl04 Q-cm bulundu. Aynı örneklerin Hail mobiliteleri 1.04x1ü2 ve 38.58xl0"2 cm2/V-s olarak elde edildi, özdirenç ve Hail mobilite değerleri karşılaştırıldığında özdirençteki artışın Hail mobilitesinde azalışa neden olduğu görüldü. UV spektrometresi ölçüm sonuçlarından yararlanarak, farklı oranlarda ve alt taban sıcaklılarında hazırlanan InP ince film örnekleri için elde edilen enerji bant aralığı değerleri 1.60-1.85 eV arasında değişmektedir. Örneklerin yapısal özellikleri XRD ve SEM yöntemleriyle tespit edildi. XRD ve SEM ölçümü sonuçlarından tüm ince film örneklerinde homojen bir polikristalleşmenin olduğu, fakat kristalleşmenin farklı boyut ve şekillerde meydana geldiği görüldü. Bunun yanı sıra, ince film örneklerinin içerdiği indiyum oranının artmasıyla doku boyutlarının arttığı ve buna bağlı olarak yüzey yapısındaki kristalleşmenin homojenliğe doğru gittiği görüldü.
Özet (Çeviri)
SUMMARY INVESTIGATION OF THE ELECTRICAL OPTICAL AND STRUCTURAL PROPERTIES OF THE InP THIN FILMS OBTAINED BY SPRAYING PYROLYSIS METHOD AKSOY, Funda Nigde University Graduate School of Natural and Applied Sciences Department of Physics Supervisor : Prof. Dr. Refik KAYALI July 2005, 68 pages Electrical, optical and structural properties of the InP thin films formed from the solutions prepared with InCl3 and Na2HP04 with different ratios at different temperatures by spraying pyrolysis method were studied by means of different metods, such as four probe method, Hall mobility experiment, UV spectroscopy, XRD and SEM. The resistivity values of two samples obtained by four probe method in dark and under the light were found 6.25xl04, 19.11xl04 Q-cm 5.74xl04 and 12.57xl04 fi-cm respectively. The Hall mobilities of the same samples were obtained as 1.04X102 and 38.58xl0"2 cm2/V-s from the Hall measurements. When these obtained values of the samples were compared with, each other it was seen that the increase in resistivity of the samples is due to decrease in the mobility. It was found that the band gap energy values of the four samples prepared with different ratios and substrate temperatures obtained from the UV spectroscopy measurement results were varied in the energy region 1.60-1.85 eV. The structural properties of the samples were determined by using the XRD and SEM methods. XRD and SEM measurements showed that all of the thin samples had homogen and polycrystallization structure, but it was observed that the crystallization has been formed with different sizes and formes. In addition to, it was seen that the grain sizes increase with increasing the amount of the indium in thin film samples and at same time the increase amount of the indium causes the crystallization on the surface structure of the samples to have much more homogenic structure.
Benzer Tezler
- Organik yarıiletken tabanlı fotovoltaik aygıtlar için şekilli ince film altlıkların kullanımı ve etkilerinin incelenmesi
The effect of the usage of sculptured thin film substrates for organic semiconductor based photovoltaic devices
DİLEK DEMİROĞLU
Doktora
Türkçe
2019
Fizik ve Fizik Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA KAMİL ÜRGEN
DR. ÖĞR. ÜYESİ BEYHAN TATAR
- Fabrication of SWCNT/AgNW/PEDOT: PSS nanocomposite transparent conductive films
Karbon nanotüp/gümüş nanotel/PEDOT: PSS nanokompozitlerden transparan ve iletken ince filmlerin üretilmesi
SERRA MELEK AKYÜZ
Yüksek Lisans
İngilizce
2022
Enerjiİstanbul Teknik ÜniversitesiEnerji Bilimi ve Teknolojileri Ana Bilim Dalı
PROF. DR. NİLGÜN YAVUZ
- Kimyasal sprey püskürtme yöntemiyle üretilen FePc/Si heteroeklemlerin elektriksel ve optik özellikleri
Electrical and optical properties of FePc/Si heterojunctions synthesized by chemical spray pyrolysis technique
PELİN AYDOĞAN
Yüksek Lisans
Türkçe
2010
Fizik ve Fizik MühendisliğiYıldız Teknik ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. KUBİLAY KUTLU
- Characterization of Turkish bee products such as propolis, pollen and royal jelly in terms of bioactive components, health effects and encapsulation
Türkiye'ye ait arı sütü, propolis ve polen gibi arı ürünlerinin biyoaktif bileşenler, sağlık etkileri ve enkapsülasyonu açısından karakterizasyonu
ÜMİT ALTUNTAŞ
Doktora
İngilizce
2023
Gıda Mühendisliğiİstanbul Teknik ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
PROF. DR. BERAAT ÖZÇELİK