Geri Dön

Voltammetrik yöntemlerle bor tayini ve uygulamaları

Voltammetric determination methods of boron and applications

  1. Tez No: 177893
  2. Yazar: İBRAHİM ŞAHİN
  3. Danışmanlar: Y.DOÇ.DR. NURİ NAKİBOĞLU
  4. Tez Türü: Doktora
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Bor, mannitol, arsenik, katodik sıyırma voltammetrisi, adsorptif sıyırma voltammetrisi, Alizarin Red S, su analizi, Adsorptif sıyırma voltametrisi, Katodik sıyırma voltametrisi, Boron, mannitol, arsenic, cathodic stripping voltammetry, adsorptive stripping voltammetry, Alizarin Red S, water analysis
  7. Yıl: 2007
  8. Dil: Türkçe
  9. Üniversite: Balıkesir Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu çalısmada voltammetrik bor tayini için iki yeni yöntem gelistirilmis ve bu yöntemler basta bor içerikli su örnekleri olmak üzere degisik örneklere uygulanarak yöntem geçerliligi arastırılmıstır. Bu yöntemlerden ilki, diferansiyel puls katodik sıyırma voltammetrisiyle sülfirik asitli ortamda, mannitol, bakır ve selenyum varlıgında elde edilen As(V) pik akımının bor varlıgında azalmasına dayanan dolaylı bor tayinidir. Burada As(V) pik akımı belirli bir derisim aralıgında mannitol derisimi ile dogrusal degismekte ve ortama bor ilave edildiginde bor-mannitol kompleksinin olusumu, As(V) pik akımında azalmaya neden olmaktadır. Yöntemin optimizasyonu için, pik akımındaki azalmayı etkileyen sülfirik asit derisimi, mannitol derisimi, As(V) derisimi, Cu(II) derisimi, Se(IV) derisimi, biriktirme potansiyeli ve biriktirme süresi parametreleri incelenmis ve sırasıyla 0.1 mol/L, 0.1 mol/L, 0.8 mg/L, 22.5 mg/L, 40 ?g/L, -550 mV (Ag/AgCl'e karsı) ve 90 s olarak bulunmustur. Optimum kosullarda elde edilen kalibrasyon grafiginin 9-100 mg/L aralıgında dogrusal oldugu görülmüstür. Kalibrasyon grafiginden belirtme sınırı 2.7 mg/L olarak hesaplanmıstır. Yöntemin bagıl standart sapması, (RSD) 10 mg/L bor varlıgında (n = 7) % 2.6 bulunmustur. Yöntem yüksek bor içerikli su örneklerine uygulanmıs ve % 97-105 aralıgında gerikazanım hesaplanmıstır. Elde edilen sonuçlar Azomethine-H yöntemiyle elde edilen sonuçlarla karsılastırılmıs ve istatistiksel olarak anlamlı bir fark bulunmamıstır. Gelistirilen ikinci yöntem, amonyum asetat/fosfat tamponunda (pH 7) borun Alizarin Red S (ARS) ile olusturdugu kompleksin asılı civa damla elektrodu yüzeyine adsorpsiyonu ve potansiyelin anodik yönde taranması sonucunda -0.47 V'da komplekse ait yeni bir pik olusumuna dayanmaktadır. Yöntemin optimum parametreleri arastırılmıs ve destek elektrolit: amonyum asetat/fosfat tamponu (pH 7), ARS derisimi: 1.10-6 mol/L, biriktirme potansiyeli: - 700 mV (Ag/AgCl'e karsı) biriktirme süresi: 0 s, potansiyel tarama modu: diferansiyel puls, potansiyel tarama hızı: 5 mV/s olarak bulunmustur. Optimum kosullarda elde edilen kalibrasyon grafiginin 55-500 ?g/L aralıgında dogrusal oldugu görülmüstür. Yöntemin belirtme sınırı, 15 ?g/L (S/N=3 alınarak) ve tayin sınırı 55 ?g/L (S/N=10 alınarak) olarak hesaplanmıstır. Farklı iyonların girisim etkileri incelenmis ve Al(III), Fe(III), Zn(II), Pb(II) ve Sb(III)'ün girisim yaptıgı gözlenmistir. Bunlardan Sb(III) dısındaki Al(III), Fe(III), Zn(II), ve Pb(II)'nun girisimi çözeltiye EDTA ilavesi ile giderilmistir. Yöntemin bagıl standart sapması, 100 ?g/L bor için % 5.1 (n=10) olarak bulunmustur. Yöntem, Balıkesir'in zengin bor yataklarının bulundugu Bigadiç ilçesinden alınan yüksek bor içerikli su ve Bandırma körfezinden alınan deniz suyu örneklerine uygulanmıstır. Bu örneklerde % 96-108 aralıgında gerikazanım hesaplanmıstır. Elde edilen sonuçlar Azomethine-H yöntemiyle elde edilen sonuçlarla karsılastırılmıs ve istatistiksel olarak anlamlı bir fark bulunmamıstır.

Özet (Çeviri)

In this study, two novel methods were developed for voltammetric determination of boron and the validiation parameters of both the methods were investigated by applying them to various samples, mainly water samples with boron content. The former is an indirect method by differential pulse cathodic stripping voltammetry, based on the decrease of As(V) peak current which is obtained in the presence of mannitol, copper and selenium in the sulphuric acid medium. It was found that the As(V) peak current has changed linearly in the interval of particular mannitol concentration and the current has decreased due to the formation of boronmannitol complexes when boron was added to the solution. For the optimization of the method, the parameters those affect the decrease in the peak current such as the concentration of sulphuric acid, mannitol, As(V), Cu(II), and Se(IV), accumulation potential and the accumulation time were examined, and found to be 0.1 mol/L, 0.1 mol/L, 0.8 mg/L, 22.5 mg/L, 40 ?g/L, -550 mV (versus Ag/AgCl) ve 90 s, respectively. It was seen that the the calibration curve obtained in the optimum conditions is linear in the range of 9-100 mg/L. The limit of detection was calculated from the calibration curve as 2.7 mg/L. Relative standard deviation (RSD) of the method was found to be as 2.6 % at the 10 mg/L boron level (n=7). The method was applied to high boron-containing top water samples and the recoveries were calculated in the range of 97-105 %. The results obtained from the developed method were compared with Azomethine-H method and no statistically significant difference was found. The second method developed is based on the monitoring the anodic peak of the boron-Alizarin Red S complex (ARS) at ?0.47 V in ammonium acetate? phosphate buffer (pH 7). Here, boron complexes with Alizarin Red S (ARS) and the complex, as well as the free ligand, both adsorbs on a hanging mercury drop electrode. A new peak has appeared at ?0.47 V by applying the potential towards to anodic direction. The optimum parameters of the method were investigated and found to be as follow: supporting electrolyte; ammonium acetate/phosphate (pH=7), concentration of ARS; 1.10-6 mol/L, accumulation potential; -700 mV (versus Ag/AgCl), accumulation time: 0 s, stripping mode: differential pulse, scan rate: 5 mV/s. It was seen that the the calibration curve obtained in the optimum conditions is linear in the range of 55-500 ?g/L. The limits of detection (LOD) and quantifition (LOQ) based on signal to noise (S/N) ratio of 3 and 10 were 15 and 55 ?g/L, respectively. The interference effects of the various ions were examined, and the interference from Al(III), Fe(III), Zn(II), Pb(II) and Sb(III) were observed. Except Sb(III), the interference of Al(III), Fe(III), Zn(II), and Pb(II) was eliminated by adding EDTA into the solution. The relative standard deviation (RSD) was found as 5.1 % for the 100 ?g/L boron level (n = 10). The method was applied with satisfactorily results to the water samples with boron content collected from Bigadiç district of Balıkesir city and to the samples of seawater collected from Bandırma gulf. In those samples, the recoveries were calculated in the range of 96-108 %. The results obtained from the developed method were compared with Azomethine-H method and no statistically significant difference was found.

Benzer Tezler

  1. Metal organik kafes yapılımodifiye elektrotların ve bor katkılıelmas elektrodun ilaçlarda ve gıdatakviye ürünlerinde yeni uygulamaları

    New applications of metal-organic framework modified electrodes and boron-doped diamond electrode in pharmaceuticals and dietary supplements

    YUNUS BEDİR

    Doktora

    Türkçe

    Türkçe

    2026

    KimyaVan Yüzüncü Yıl Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. YAVUZ YARDIM

  2. Zolmitriptan'ın elektroanalitik incelenmesi ve tayini

    Electroanalytical investigation and determination of zolmitriptan

    DUYGU CANBAZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2008

    Eczacılık ve FarmakolojiAnkara Üniversitesi

    Analitik Kimya Ana Bilim Dalı

    DOÇ. DR. BENGİ USLU

  3. Demir(III) iyonuna hassas, tiyofen ile modifiye edilmiş rodamin tabanlı yeni tip sensörün sentezi, karakterizasyonu ve uygulamaları

    Synthesis, characterization and applications of the iron(III) ion sensitive, thiophene modified rodamine-based new type of sensor

    HÜLYA ARIBUĞA

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Kimyaİstanbul Teknik Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. İSMAİL YILMAZ

  4. Ketonic resin-polypyrrole copolymers

    Ketonik reçine–polipirol kopolimerleri

    GİZEM KURTULMUŞ

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. NİLGÜN KIZILCAN

  5. Dihidroksipropilteofilin' in elektrokimyasal yöntemlerle miktar tayini

    Determination of dihydroxypropyl theophylline by electrochemical techniques

    DİLAY SUBAŞI

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    KimyaAnkara Üniversitesi

    Analitik Kimya Ana Bilim Dalı

    DOÇ. DR. BURCU DOĞAN TOPAL