Ataktik polipropilenin fonksiyonlandırılması
Functionalization of atactic polypropylene
- Tez No: 196746
- Danışmanlar: DOÇ.DR. GÜLSU AKIN ÖKTEM, PROF.DR. ZEKİ ÖKTEM
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2005
- Dil: Türkçe
- Üniversite: Kırıkkale Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 92
Özet
ÖZET$7$.7ø.32/ø3523ø/(1ø1)21.6ø
Özet (Çeviri)
ABSTRACTFUNCTIONALIZATION OF ATACTIC POLYPROPYLENEÜNVER, Halil.ÃUÃNNDOH8QLYHUVLW\Graduate School of Natural and Applied SciencesDepartment of Chemistry, M. Sc. ThesisSupervisor : Prof. Dr. Zeki ÖKTEMJune 2005, 80 pagesIn this work functionalization of atactic polypropylene, APP, withdifferent allylic monomers, without tendency of polymerization, was aimed. Itis known that chain degradation and crosslinking reactions take place duringfunctionalization reactions. The electrochemical functionalization of APP wasstudied in order to develop a new functionalization technique, in which thesereactions occur in minimum extent. However, the amount of bonding wasfound to be very low. Therefore, the studied new technique was decided tobe insufficient for the functionalization of APP. Therefore, modification of APPwas continued with solution functionalization.APP was functionalized with 4-allyl-2-methoxyphenol, 4-allylanisole4-allyl-1,2-dimethoxybenzene and allylbenzene in toluene by using benzoylperoxide. The effect of functionalization time, concentration of initiator andconcentration of functional compound on the extent of functionalization wasstudied and the molecular weights and glass transition temperature of thesamples were determined. The obtained results indicated the formation ofchain degradation and crosslinking reactions during functionalizations.However, the molecular weights of the samples observed to be higher thanthe molecular weight of APP. Also, Tg values of the samples were found tobe higher than the Tg of APP. However, it was observed that Tg of thesamples mostly varried with the molecular weights or heterogenity indices ofthe samples rather than depending on the amount of bonded functionalcompounds.The spectroscopic analyses of the samples were carried with FT-IR.However, due to low bonding of functional compounds the mechanism offunctionalization could not be clarified.Key words : Atactic polypropylene, functionalizationii
Benzer Tezler
- Functionalization of atactic polypropylene
Ataktik polipropilenin fonksiyonlandırılması
SEDAT ÇETİN
Yüksek Lisans
İngilizce
1998
KimyaAbant İzzet Baysal ÜniversitesiKimya Ana Bilim Dalı
YRD. DOÇ. DR. GÜLSU AKIN ÖKTEM
- Ataktik polipropilen'in özelliklerinin katkı maddeleri ile modifikasyonun incelenmesi
Investigation of atactic polypropylene properties modified by different chemicals
GÖKSUN DEVECİLER DİZBAY
Yüksek Lisans
Türkçe
2004
Kimya MühendisliğiKocaeli ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
Y.DOÇ.DR. ENVER DEMİRHAN
- Modification of polypropylene by free radical grafting
Polipropilenin serbest radikaler aşılama yöntemi ile modifikasyonu
GÜLİZAR KAYA
- Ataktik polipropilen, özellikleri ve çapraz bağlanması
The properties and crosslinking of atactic polypropylene
NİSA KOÇAK
Yüksek Lisans
Türkçe
2005
Polimer Bilim ve TeknolojisiCelal Bayar ÜniversitesiPROF. DR. BİLSEN BEŞERGİL
- Synthesis and characterization of conducting polymers based on grafted atactic polypropylene
Aşılı ataktik polipropilen esaslı iletken kopolimerin sentez ve karakterizasyonu
AREF JAVAHERİAN
Doktora
İngilizce
2000
KimyaOrta Doğu Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. SAVAŞ KÜÇÜKYAVUZ