Selülozik liflerin farklı şartlarda fibrilleşme ve yorulma davranışlarının incelenmesi
Investigation of fibrillating and creeping behaviours of cellulosic fibers under different conditions
- Tez No: 202325
- Danışmanlar: PROF. DR. ASLI HOCKENBERGER
- Tez Türü: Yüksek Lisans
- Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
- Anahtar Kelimeler: Rejenere Selülozik Lifler, Lyocell, Modal, Viskon, Sürünme Davranısı, Kopma Mekanizması, Çekme Davranısı, Regenerated Cellulosic Fibers, Lyocell, Modal, Viscone, Creep Test, Fracture Mechanism, Testrite Test
- Yıl: 2007
- Dil: Türkçe
- Üniversite: Uludağ Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Tekstil Bilimleri Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 182
Özet
Bu çalısmada selüloz hammaddesini içeren tekstil liflerinden, rejenere selülozik esaslı liflerin 5 degisik tipi kullanılmıstır. Bunlar konvansiyonel yönteme göre üretilen, Viskon ve Modal ile bunlara alternatif olan çevreyle dost, ekonomik, üstün mekanik ve fiziksel özelliklere sahip, NMMO prosesi ile üretilen Tencel Standart, Tencel A-100 ve Lyocell LF'dir. Deneylerde malzemenin lif formu ile çalısılmıstır. Bu çalısmada liflerin islem görmemis ve yas-mekanik etkilerle fibrillestirilmis formları kullanılmıstır. Her iki formdaki liflere; sırasıyla çekme testi, 24 saatlik sürünme testi, sürünme sonrası tekrar çekme testi uygulanmıs, kopan uç ve lif yüzey görüntüleri için SEM çalısması yapılmıstır. Yapılan deneylerde, liflerin her iki formunun kendi içindeki, kopma uzamasısürünme uzaması ve kopma yükü-sürünme sonrası kopma yükü degerleri ile her iki form arasındaki bu degerler karsılastırılmalı olarak incelenmistir. Bu çalısmalar sonucunda fibrillesmenin liflerin çekme, sürünme, sürünme sonucu çekme ve yüzey özellikleri üzerinde önemli etkileri oldugu gözlemlenmistir. Bu liflerin sahip oldugu merkez kabuk etkileri yapılan çalısmada elde edilen sonuçlar üzerinde büyük bir etkiye sahiptir. Normal ve Sürünme sonrası çekme deneylerinde islem görmemis lifler, fibrillestirme islemi görmüs liflerden daha çok uzama göstermistir. slem görmemis ve fibrillestirilmis liflerden en fazla kopma uzaması gösteren lif Viskon'dur. Normal çekme deneyleri ve sürünme sonrası çekme deneyleri sonucunda en fazla kopma yüküne sahip olan lif ise, islem görmemis lif çalısmasında Tencel Standart olurken fibrillesmis lif çalısmasında Tencel A-100'dür. slem görmemis liflerin sürünme sonrası kopma yükü degerleri azalırken, fibrillestirme islemi görmüs liflerden Tencel A-100 ve Viskon'un kopma yükü degeri artmıs, diger liflerin kopma yükü degeri ise azalmıstır. Sürünme deneylerinde islem görmemis liflerden en fazla sürünme gösteren lif, Viskon iken, fibrillestirilmis liflerden en fazla sürünme gösteren lif Modal'dır. Çekme deneyleri sonucunda yapılan SEM çalısmalarından liflerin kopma mekanizmaları tespit edilmistir. Selülozik esaslı lifler, fibrilsel ve tanelenerek kopma mekanizması gösterirler. Buna göre, Viskon, Modal ve Tencel Standart lifleri tanelenerek kopma mekanizması, Tencel A-100 ve Lyocell LF lifleri ise fibrilsel kopma mekanizması göstermislerdir.
Özet (Çeviri)
In this study we used 5 different types of regenerated cellulosic fibers that includes cellulose commodity. These fibers are ; Viscone and Modal which are produced conventionaly and alternatively to them Tencel Standart, Tencel A-100 and Lyocell LF fibers produced according to NMMO Process that are environment friendly, economic, have superior mechanic and physical characteristics. In the experiments we used the fiber form of the material. In this study we used the forms of the fibers which are not processed and fibrillated with the age-mechanic effects. Creeping and along 24 hours testrite tests and after testrite test again creeping test are applied to the both fiber forms respectively. After theese tests the SEM Process is applied for displaying the broken edge and fiber surface images.During experiments, breaking extensioncreeping extension and breaking load-after creeping breaking load values of the both forms of fibers are examined relatively for each forms of fibers. After these studies it is examined that the fibrillation has significant effects on testrite, creeping, testrite because of creeping and surface properties. Central skin effects of these fibers have so important efficiency on the results of the study performed. Normal fibers and the fibers which are not processed in the testrite experiments after creeping perform more extension than the fibers which are exposed to fibrillation. The fiber which performes the most breaking extension is the Viscone through the fibers which are not processed and fibrillated. In the end of normal testrite experiments and after creeping testrite experiments the fiber which has the most testrite load is the Tencel Standart during the no process fiber study and the Tencel A-100 during the fibrillated fiber study. While the breaking load values after creeping of the fibers which are not processed decrease, the breaking values of the fibers Tencel A-100 and Viscone which are fibrillated increase and the values of the other fibres decrease. During the creeping experiments the fiber which performed the most amount of creeping through the fibers that are not processed is the Viscone whereas the fiber which performed the most amount of creeping is the Modal through the fibrillated fibers. The breaking mechanisms of the fibers are achieved from the SEM studies that are performed after testrite experiments. The cellulosic fibers exhibit fibril based and granulated breaking mechanism. Accordingly the Viscone, Modal and Tencel Standart fibers exhibit granulated breaking mechanism and the Tencel A-100 and Lyocell LF fibers exhibit fibril based breaking mechanism.
Benzer Tezler
- 0-1 yaş aralığındaki (infant) bebeklerin giyim konforuna yönelik giysilerin geliştirilmesi
The development of comfortable clothes for infants
EMİNE UTKUN
Doktora
Türkçe
2013
Tekstil ve Tekstil MühendisliğiEge ÜniversitesiTekstil Teknolojisi Ana Bilim Dalı
PROF. DR. ZİYNET ÖNDOĞAN
- Tarihi tekstil konservasyonunda temizlik uygulaması
Cleaning technique at historical textile conservation
FATMA BANU UÇAR
Yüksek Lisans
Türkçe
1999
El Sanatlarıİstanbul ÜniversitesiTaşınabilir Kültür Varlıklarını Koruma ve Onarım Ana Bilim Dalı
DOÇ. DR. SAİT BAŞARAN
- Biogas recovery during anaerobic treatment of lignocellulose-rich pollutants with high sulphate content: an investigation via innovative applications
Yüksek sülfat içerikli lignoselüloz bakımından zengin kirleticilerin havasız arıtımı sırasında biyogaz geri kazanımı: yenilikçi uygulamalarla bir araştırma
EDA YARSUR
Yüksek Lisans
İngilizce
2021
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. ÇİĞDEM GÖMEÇ
- Remazol ultra kırmızı RGB boyasının sulu çözeltilerden palmiye yaprakları ve lifleri kullanılarak adsorpsiyonunun yanıt yüzey metodu ile optimizasyonu
Optimization of remazol ultra red RGB dye adsorption from aqueous solutions onto palm leaves and fibers by using response surface method
SETENAY SEVİMLİ
Yüksek Lisans
Türkçe
2022
BiyoteknolojiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. BELMA ÖZBEK