Akseki boksit cevherinin refrakter sanayi için kullanılabilirliğinin araştırılması
The investigation of Akseki bauxite for the refractory industry
- Tez No: 202600
- Danışmanlar: DOÇ. DR. TURAN BATAR
- Tez Türü: Yüksek Lisans
- Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2005
- Dil: Türkçe
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Maden Mühendisliği Bölümü
- Bilim Dalı: Cevher Hazırlama Ana Bilim Dalı
- Sayfa Sayısı: 73
Özet
Bu çalımada, refrakter boksit prosesi artırılmıtır. Refrakter boksit %2 oranında demiroksit içeren aluminyumca zengin (
Özet (Çeviri)
In this study, refractory bauxite process was investigated, the method of processing ismainly leaching. A raw material that is using for refractory bauxite, has to consist of 2%iron oxide. The raw material from Akseki bauxite mine that belongs to the Almin MiningCo. is consist of average 12% iron oxide, using hydrochloric acid, is decreased the ironoxide ratio to less than 1%.To put ammonia into the liquid phase, iron oxide is precipitated, and solid-liquidseparation again. Solid phase is high grade iron oxide, liquid phase is hydrochloric acid,this hydrochloric acid goes to the conduction tank, it is used in process three times. Afterthree times, The water that consist of hydrochloric acid is gone to the another tank that isadded sodiumhydroxide, and heated, is precipitated salt (sodiumchlorur.x).This process has to controled by an automation system. A process control system isinvestigated for this process. But it has not finished yet. This is a beginning of processcontrol system. Using this system is measured the temperature and pressure automaticly,and can be control the system to the computer.This investigation stage has got a different approach that called ellips model formanagement of the mineral processing stages. In this model, before the decide whichprocess will use, has to understand what the ore evaluation model. For example, Bauxiteevaluate model is leaching, Aluminium is residual, can be precipitated a suitable area. Butthe natural acid is not enough strong to solve iron oxide. That?s why aluminium and ironoxide are precipitated together. If the natural system is going on with strong acid can getpure iron oxide and aluminium. This is approach of this investigation.
Benzer Tezler
- Akseki-Aydınkent (Antalya) arasının jeolojisi ve petrol olanakları
Geology and petroleum possibilities of Akseki-Aydınkent (Antalya)
MUSTAFA ALBAYRAK
Doktora
Türkçe
1995
Jeoloji MühendisliğiAnkara ÜniversitesiJeoloji Mühendisliği Ana Bilim Dalı
PROF. DR. NURETTİN SONEL
- Alüminyum yataklarının uzaktan algılama (remote sensing) tekniği ile haritalanması: yöntemin Akseki-Seydişehir boksit yataklarına uygulanması
Mapping of aluminum of occurences with remote sensing method: Application of the methods to Akseki-Seydişehir bauxite deposits
TUĞBA SARAYKÖYLÜ
Yüksek Lisans
Türkçe
2010
Jeoloji MühendisliğiMersin ÜniversitesiJeoloji Mühendisliği Ana Bilim Dalı
PROF. DR. FEVZİ ÖNER
- Jeoistatistiksel analiz için bir bilgisayar programının geliştirilmesi ve Antakya-Akseki-Kızıltaş boksit yatağına uygulanması
Developing a computer program for geostatistical analysis and its applicationto Antalya-Akseki-Kızıltaş bauxite orebody
BAYRAM ALİ MERT
Yüksek Lisans
Türkçe
2004
Maden Mühendisliği ve MadencilikÇukurova ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
Y.DOÇ.DR. AHMET DAĞ
- Akseki-Aydınkent (Antalya) civarının petrol kapanlanmasında etkili olan yapısal özelliklerinin belirlenmesi
Determination of the structural properties which effect of the oil traps around Akseki-Aydınkent (Antalya)
AHMET ACAR
Yüksek Lisans
Türkçe
1993
Jeoloji MühendisliğiAnkara ÜniversitesiJeoloji Mühendisliği Ana Bilim Dalı
PROF. DR. NURETTİN SONEL
- Seydişehir-Akseki yöresi boksitlerinin mineralojik-kimyasal özelliklerinin incelenmesi
Investigation of mineralogic-chemical properties of Seydişehir-Akseki bouxites
A. NAGİHAN ERKAN