Kompozit malzeme zincir bağlantısının gerilme analizi
Stress analysis of the composite chain component
- Tez No: 202624
- Danışmanlar: DOÇ. DR. MİNE DEMİRSOY
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2005
- Dil: Türkçe
- Üniversite: Dokuz Eylül Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Konstrüksiyon ve İmalat Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu arastırmada, kompozit malzemeden (epoksi ? cam elyaf) üretilmis olan degisikgeometrilerdeki zincir baglantı parçaların farklı kuvvetler altında gerilme analizlerinindeneylerle ve nümerik analizlerle yapılmıs ve sonuçları karsılastırılmıstır. Numuneler 4mm ve 5 mm kalınlıgındadır. Numunelerde 4 adet pim deligi bulunmaktadır. Pimlerdenikisi 6 mm (D1) ve diger ikisi 8 mm (D) çapındadır. Çapları 6 mm olan iki piminmerkezleri arasındaki mesafeler (E1) degisken olup, çapları 8 mm olan pimler arasındakimesafe her numunede sabittir. W/D1 oranları 3, 4, 5 ve E1/D1 oranları da 1,6, 1,7, 1,8, 1,9olarak alınmıstır. Deneyler; E1/D1 oranlarının degistigi pimlere, 2,5 kilogramlık dıs kuvvetve diger pimlere Instron - 1114 çekme cihazıyla çesitli kuvvetler (0 ? 1500 N) uygulanarakyapılmıs ve aynı islem 5 kilogramlık dıs kuvvet uygulanarak tekrarlanmıstır. Yapılan budeneyler, ANSYS 5.4 programında sonlu elemanlar metoduyla aynen simüle edilmistir.Ancak ANSYS programında yapılan nümerik analizler 250, 500, 750, 1000, 1250 ve 1500N' luk kuvvetler için yapılmıstır.
Özet (Çeviri)
In this study, the stress analysis of the composite (epoxy ? glass fibre) chain componentspecimens in different geometries were investigated under different tensile forces by usingexperimental and numerical analysis, and the comparisons were made between thenumerical and experimental results. Each specimen was produced in two differentthicknesses (4 mm, 5 mm), and there are 4 pin holes on each specimen. Diameters of twopin holes are 6 mm (D1) , and the other ones are 8 mm (D). While the distance (E1)between the centers of the pin holes, which diameters are 6 mm, are different for eachspecimen with the same thicknesses, the distance between the other two pins staysconstant. The width to diameter (W/D1) ratios and distance between centers of pin holes todiameter (E1/D1) were changed from 3 to 5 and 1,6 to 1,9, respectively. Experiments werefirstly performed loading the two pins, which have different E1/D1 ratios, with 2,5 kg andapplying various tensile forces ( between 0 ? 1500 N) on the other pins by theInstron ? 1114 Tensile Testing Machine. Then, the procedure was repeated loading the twopins with 5 kg. ANSYS 5.4 with finite elemnt method program was used for the numericalanalysis. These analysis were perfromed for only 250, 500, 750, 1000, 1250 and 1500 Ntensile forces.
Benzer Tezler
- Karbon elyaf,grafen nanoplatelet ve zincir uzatıcı katkıların poliamit 6,6 kompozitlerin özellikleri üzerine eş zamanlı etkisinin incelenmesi
Synergetic effect of graphene nanoplatelet,carbon fiber and coupling agent addition on the tribological,mechanical and thermal properties of polyamide 6,6 composites
ECEM KARATAŞ DEMİRAY
Yüksek Lisans
Türkçe
2019
Makine MühendisliğiKocaeli ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. TANER YILMAZ
- Kompozit rulolu zincir bakla ve taşıyıcılarında elastik ve elastoplastik gerilme analizi
The Elastic and elasto-plastic stress analysis of roller chain link plates and carrier made of composite material
NÜSRET AS
Yüksek Lisans
Türkçe
2003
Makine MühendisliğiFırat ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. NURETTİN ARSLAN
- Kenevir liflerinden çevre dostu tümü-selüloz kompozit elde edilmesi
Environmentally friendly all-cellulose composite production from hemp fibers
SİNEM LALOĞLU
Doktora
Türkçe
2026
Ormancılık ve Orman Mühendisliğiİstanbul Üniversitesi-CerrahpaşaOrman Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. CELİL ATİK
- Termoplastik poliüretan sentezi ve kompozit hazırlama uygulamaları
The synthesis of thermoplastic polyurethane and applications of composite preparation
ZERRİN ALTINTAŞ
Doktora
Türkçe
2012
KimyaMarmara ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. NİLHAN KAYAMAN APOHAN
DOÇ. DR. MEMET VEZİR KAHRAMAN
- Şekil verilebilen ve gözenek boyutu ayarlanmış hidroksiapatit bulk malzeme sentezi
Başlık çevirisi yok
EYLÜL ODABAŞ