Geri Dön

Toplam kalite yönetimi uygulamalarının üretim süreçleri üzerindeki etkisi ve bir uygulama

Impact of total quality management applications on production processes and a practise

  1. Tez No: 209204
  2. Yazar: SERPİL SOFUOĞLU
  3. Danışmanlar: Y.DOÇ.DR. MEHMET EMİN OKUR
  4. Tez Türü: Yüksek Lisans
  5. Konular: İşletme, Business Administration
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2007
  8. Dil: Türkçe
  9. Üniversite: Marmara Üniversitesi
  10. Enstitü: Sosyal Bilimler Enstitüsü
  11. Ana Bilim Dalı: İşletme Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 111

Özet

Bu araştırmada, toplam kalite yönetimi ile üretim süreçlerinin birbirlerine olan etkisi anlatılmak istenilmektedir. Amaç, literatür araştırması yaparak toplam kalite yönetimi uygulamaları ile üretim yönetimi uygulamalarından bahsedilerek birbirleri arasında nasıl bir ilişkinin olduğu ve birbirlerini nasıl etkilediğini incelemektir. Birinci bölümde kalite kavramından, kalitenin özelliklerinden, toplam kalite yönetiminin amaçları, ilkeleri ve toplam kalite yönetimini etkileyen faktörlerden bahsedilmiştir. İkinci bölümde, üretim kavramı, üretim yönetiminin amaçları ve proses yaklaşımı konusunda bilgi verilmiştir. Üçüncü bölümde, sürekli iyileştirmeyi sağlayacak takımların kurulması, çalışma esasları, başarısızlık nedenleri, ilerleme alanlarının belirlenmesi ve takımların sağladıkları faydalara ayrılmıştır. Takımların iyi kurulması başarılı bir iyileştirme çalışması için şarttır. Prosesi gözden geçirme ve geliştirme çalışmalarındaki mevcut aşamalar, programın oluşturulması, prosesin tanımlanması, geliştirilen proseslerin doküman haline getirilmesi ve proses gözden geçirme geliştirme çalışmalarının sağladığı faydalar anlatılmıştır. Dördüncü bölümde, toplam kalite yönetimini etkileyen faktörlerin üretim süreçleri ile ilişkisinden bahsedilmiştir. Beşinci bölümde toplam kalite yönetimi ile üretim süreçleri arasındaki ilişkiyi ortaya koymak amacıyla yapılan uygulamaya ve elde edilen sonuçlara yer verilmiştir. Bu ilişki, çevre, tedarikçi seçimi, tedarikçi ilişkileri, ürün tasarımı ve imalat süreci olmak üzere beş boyutta ele alınmıştır. Araştırmadan elde edilen sonuçlara göre, üretim süreçleri üzerinde Toplam Kalite Yönetiminin tüm boyutları uygulandığında, imalat süreci ve çevre boyutlarına, diğer boyutlara oranla daha fazla önem verildiği ortaya çıkmıştır.

Özet (Çeviri)

This study tries to explain the impacts of total quality management applications and production processes on each other. Its purpose is to conduct a literature study and to mention the total quality management applications as well as the production management applications and eventually to examine what sort of a relation exists between the aforesaid and how they affect each other. The first section touches upon the concept of quality, the particularities of quality, the purposes and principles of total quality management and the factors that affect total quality management. The second section provides information on the concept of production, the purposes of production management and the process approach. The third section has been allotted to the establishment of teams that will provide constant development, the operating principles, the reasons behind failure, the determination of improvement fields and the benefits provided by such teams. A good establishment of teams is mandatory for a successful development study. The current phases in the process revision and development studies, the setting up of the program, the definition of the process, the documentation of the developed processes and the benefits provided by the process revision & development studies have been explained. The fourth section touches upon the relations of the factors that affect total quality management with the production processes. The fifth section touches upon the executed application and the results obtained so as to manifest the relations between the total quality management and production processes. This relation has been handled in five dimensions which are environment, supplier selection, supplier relations, product design and production process. The results obtained from the study have shown that production process and environmental dimensions are given more importance than other dimensions when all dimensions of Total Quality Management are applied on the production processes.

Benzer Tezler

  1. Üretim sistemlerine toplam kalite yaklaşımı

    A Total quality approach to production system

    S. BİRGİ MARTİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2001

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. İRFAN SAYGILI

  2. Metal sektöründe faaliyet gösteren KOBİ'lerin rekabet gücünün otomotiv sanayii örneğinde araştırılması

    Investigation of competition power of small and medium sized enterprises (SME) in an example of automotive supplier industry

    SUAT CANOĞULLARI

    Doktora

    Türkçe

    Türkçe

    1999

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. YILMAZ TAPTIK

  3. Toplam kalite yönetimi ve firma performansı arasındaki ilişkinin belirlenmesi: Yapı kimyasalları ve alçı sektörü üzerine İç Anadolu Bölgesi'nde bir araştırma

    Determination of the relationship between total qualitymanagement and firm performance: A research on theconstruction chemicals sector and plaster in the centralanatolia region

    YUSUF BAYDAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    İşletmeAnkara Yıldırım Beyazıt Üniversitesi

    İşletme Ana Bilim Dalı

    DOÇ. DR. HASAN ENGİN ŞENER

  4. ISO 9000 kalite yönetimi ve ISO 14000 çevre yönetim sistemleri uygulamalarının değerlendirilmesi: Türkiye örneği

    An Evaluation of ISO 9000 quality management and ISO 14000 environmental management systems implementations: The case of Turkey

    BERSAM BOLAT

    Doktora

    Türkçe

    Türkçe

    2002

    İşletmeİstanbul Teknik Üniversitesi

    İşletme Mühendisliği Ana Bilim Dalı

    PROF.DR. SITKI GÖZLÜ

  5. Comparison of the architectural design process quality between BIM and traditional design methods

    Mimari tasarımda süreç kalitesinin BIM ve geleneksel tasarım süreci yöntemleri açısından karşılaştırılması

    CANSU YALÇIN

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. HÜSNÜ MURAT GÜNAYDIN