Çelik tel takviyeli zamak-5 alaşımının mekanik özelliklerinin incelenmesi
Investigation of mechanical properties of steel wire reinforced zamac 5 alloy
- Tez No: 212363
- Danışmanlar: YRD. DOÇ. DR. HÜSEYİN ARIKAN
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Metal matrisli kompozitler, Zn-Al alasımları, çelik tel, basınçlı döküm, üç noktadan egme testi, Metal matrix composites, Zn-Al Alloys, steel wire, squeezing casting and three point bending (TPB)
- Yıl: 2007
- Dil: Türkçe
- Üniversite: Selçuk Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 89
Özet
Bu tezde, sürekli çelik tel takviyeli Zamak 5 alasımının mekanik özellikleri arastırıldı. Galvaniz kaplı sürekli çelik tel ile Zn-Al alasımlarından Zamak 5 basınçlı döküm teknigi ile birlestirilerek kompozit kiris numuneler üretildi. Hacimce %1, %2 ve %3 oranlarında sürekli çelik tel takviyesi kullanıldı. Takviyesiz ve takviyeli tüm numunelere ASTM E-399 standardına göre üç noktadan egme testi, TSE 206 standardına uygun basma testi ve TSE 138 standardına göre çekme testi uygulandı. Numunelerin egilme elastisite modülleri, egilme, basma ve çekme dayanımları tespit edildi. Ayrıca, çentikli numunelere de üç noktadan egme testi uygulanarak numunelerin kritik gerilme siddet faktörleri hesaplandı. Takviye oranlarının malzemenin mekanik özelliklerine etkisi incelendi.
Özet (Çeviri)
In this thesis, mechanical properties of continuous steel wire reinforced Zamac 5 alloy have been investigated. Metal matrix composites that formed by combining galvanized steel wires and Zamac-5 with squeezing casting technique, has been produced as beam samples. Steel wire contents were used 1%, 2% and 3% of the total volume of the composite system. Three point bending (TPB), compression and tensile tests according to ASTM E-399, TSE 206 and TSE 138 respectively were applied to unreinforced and reinforced samples. The flexural strength, flexural modulus, compression ad tensile strength were determined. Besides, the notched samples were carried out TPB tests The critical stress intensity factors of the specimens were calculated. Effects of reinforced materials on the mechanical properties were examined.
Benzer Tezler
- Beton borulara çelik lif katkısının boru özelliklerine etkisinin deneysel olarak incelenmesi
Experimental investigation of effects of steel-fiber addition to concrete pipes on their mechanical properties of the pipes
KAMURAN ARI
Yüksek Lisans
Türkçe
2004
İnşaat MühendisliğiErciyes Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF.DR. TEFARUK HAKTANIR
- Tabakalı Kompozitlerin Darbe Direncinin İncelenmesi
Investigation the Impact Resistance of Laminated
ŞERAFETTİN ÇETİN
Yüksek Lisans
Türkçe
2022
Makine MühendisliğiNecmettin Erbakan ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ HAKAN BURAK KARADAĞ
- Fe kılıflı Fe/B4C özlü sert dolgu kaynak elektrodu üretimi ve dolgu karakterizasyonu
Production and fill characterization of hard fill welding rod with Fe sheathed and Fe/B4C cored
MEHMET ÇELİK
Yüksek Lisans
Türkçe
2021
Makine MühendisliğiErciyes ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. EYYUP GERÇEKCİOĞLU
- B4C-SİC takviyeli alüminyum matrisli hibrit nanokompozit üretimi ve işlenebilirliğinin incelenmesi
Investigation of production and machinability of B4C-SIC particle reinforced aluminium matrix hybrid nanocomposite
ZİHNİ ALP ÇEVİK
Doktora
Türkçe
2021
Metalurji MühendisliğiKahramanmaraş Sütçü İmam ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. METİN KÖK
- Çelik tel takviyeli betonların mekanik davranışı
Mechanical behavior of steel fiber reinforced concrete
TOLGA AYDÖNER
Yüksek Lisans
Türkçe
2002
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. M. ALİ TAŞDEMİR