Computer simulation of internal friction in non-linear systems
Başlık çevirisi mevcut değil.
- Tez No: 2904
- Danışmanlar: PROF. DR. TARIK Ö. OĞURTANI
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1988
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 71
Özet
ÖZET DO?RUSAL OLMAYAN SİSTEMLERDEKİ İÇ SÜRTÜNMENİN BİLGİSAYARLA SİMÜLASYONÜ ALTÜNOGLÜ, Abdülkadir Yüksek Lisans Tezi, Met. Müh. Bölümü Tea Yöneticisi : Prof. Dr. Tarık Ömer Ogurtanı Şubat, 1988, 60 Sayfa Bu araştırmada metallerdeki iç sürtünme ile ilgili doğrusal olmayan ikinci dereceden turevsel denklem;“M X”+B A XVd+A*2 X'~2> +K X =F Sin w t " beşinci dereceden Runge-Kutta / Adams Moulton tekniği kullanılarak incelenmiştir. Sonuçlar sönüm kapasitesine -1
Özet (Çeviri)
ABSTRACT COMPUTER SIMULATION OF INTERNAL FRICTION IN NON-LINEAR SYSTEMS ALTUNO?LTJ, Abdülkadir M.S. in Metallurgical Eng. Supervisor: Prof. Dr. Tank O. Ogurtani February, 1988, 60 Pages. In this study a non-linear second order ordinary differential equation;“MX”+ B A X'/ (1+A~2 X'~2) + K X = F Sin w t " related to the internal friction in metals, was investigated using high accurate Runge Kutta fifth order six stage / Adams Moulton method and results were plotted -1 as damping capacity, Q versus normalised relaxation frequency, Ob for various values of constant F (scaled down with respect to maximum drag force). In the non-linear region the shift and reduction in peak height were detected, which are completely in agrement with the Snoek-Koster relaxation. iiiThis type of non-linear problem was studied first time in the literature. Key words : computer simulation, internal friction, non linear systems. IV
Benzer Tezler
- Computer simulation of the coulombic kink chain related to snoekkoster peak in body centered cubic metals
Başlık çevirisi yok
FARUK ŞAHİN ÖNER
Yüksek Lisans
İngilizce
1989
Metalurji MühendisliğiOrta Doğu Teknik ÜniversitesiPROF. DR. TARIK ÖMER OĞURTANI
- Çift girişli türbinli ve tahliyeli aşırı doldurma sistemi korelasyonu ve prototipler için optimizasyonu
Investigation of twin-scroll turbine in turborchargers and using of wastegate system effects
HÜSEYİN BERK ÖZCAN
Yüksek Lisans
Türkçe
2020
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. OSMAN AKIN KUTLAR
- Bir endüstriyel robotun modelleme, simülasyon ve kontrolü
Modeling simulation control of an industrial robot
OSMAN CANBERİ
- Mevcut betonarme yapıların deprem performanslarının belirlenmesi ve viskoz akışkanlı sönümleyiciler ile güçlendirilmesi için artımsal analize dayalı bir algoritma
An algorithm based on incremental analysis to evaluate performance and retrofit with viscous dampers of existing reinforced conrete structures
YAVUZ DURGUN
Doktora
Türkçe
2013
Deprem Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. ERKAN ÖZER
- Yüksek devirli gemi diesel motorlarının analitik ve deneysel incelenmesi
An Analytical and exeperimental investigation of high speed marine diesel engines
OSMAN AZMİ ÖZSOYSAL