Geri Dön

Jıgger makinasında ozon gazı kullanımı ile ön terbiye ve boyama işlemlerinin uygulanabilirliği

The applicability of the pretreatment and dyeing processes at Jigger machine by using ozone gas

  1. Tez No: 379685
  2. Yazar: NAVRUZ PAKSOY
  3. Danışmanlar: DOÇ. DR. ONUR BALCI
  4. Tez Türü: Yüksek Lisans
  5. Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2014
  8. Dil: Türkçe
  9. Üniversite: Kahramanmaraş Sütçü İmam Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 135

Özet

Bu tez çalışmasında, jigger makinesinde ön terbiye işlemlerinin çevre dostu enzimler ve ozon gazı kullanılarak yapılabilme olanakları incelenmiştir. Bu amaçla, ön terbiyede haşıl sökümü ve hidrofilleştirme işlemleri enzim kullanılarak gerçekleştirilmiştir. Haşıl sökümü ve biohidrofilleştirme sonrası ağartma işlemi hidrojen peroksit yerine ozon gazı kullanılarak gerçekleştirilmiştir. Jigger makinesinde ozon gazının, ağartma materyali kullanılabilirliği araştırılmıştır. Bu kapsamda farklı çalışma şartlarında ozon gazı ile ağartma uygulamalarının yapılabilirliği incelenmiştir. Ozon gazının uygulama koşulunun, ve farklı difüzörler ile kumaşa uygulanmasının beyazlık derecesi üzerinde etkili olduğu belirlenmiştir. Jigger makinesinde enzim kullanılarak yeterli hidrofilite değerleri elde edilmiştir. Ozon gazı kullanılarak referansa yakın beyazlık değerlerine ulaşılmıştır. Ayrıca, bu uygulama konvansiyonel yöntem ile kıyaslandığında, ozon gazının kumaş dayanım ve yüzey özellikleri üzerine etkisinin olmadığı görülmüştür. Ön terbiyesi yapılmış numunelerin jigger makinesinde boyama işlemleri gerçekleştirilmiştir. Jigger makinesinde boyama sonrası konvansiyonel yönteme göre renk farklılıklarının yüksek olduğu ve boyama sonrası haslık değerlerinin konvansiyonel yönteme yakın olduğu görülmüştür. Boyama öncesi ve sonrası zamana göre renk değişimi (sararma) incelenmiştir. Ozonlanmış numunelerin beyazlık degerlerinin zamana bağlı olarak düştüğü (sarardığı) görülmüştür. Boyama sonrası ise renk değişiminin, konvansiyonel yöntemdekine benzer olduğu belirlenmiştir.

Özet (Çeviri)

In this thesis, the applying possibility of the pretreatment processes at jigger machine by using environmental-friendly enzymes and ozone gas was investigated. For this aim, the desizing and scouring treatments were carried out by enzymes in the pretreatment process. After the desizing and scouring processes, the bleaching treatments were applied by ozone gas instead of hydrogen peroxide. The usability of ozone gas at the jigger machine was investigated as bleaching material. Within this scope, the using possibility of ozone gaseat different process conditions was investigated. The results showed that the application conditions of ozone gas and usage of different diffuser for ozone application had an effect on the whiteness degree. The sufficient hydrophility was obtained by enzyme applications. We achieved similar whiteness degreeby using ozone gase. In addition, it was seen that the ozone gas had no negative effect on the strength and surface properties of the fabrics when compared this application and conventional process. The pretreated samples were dyed at the jigger machine. The dyeing results showed that there were high color differences between the conventional and ozone bleached fabrics. However, the fastness degrees of these fabrics were similar to each other. The change of color with time was examined for the pretreated and dyed samples. The results showed that the whiteness degrees of samples decreased depending on holding time. However, after dyeing of samples, the color change showed similarity to conventional process.

Benzer Tezler

  1. Grafen oksit ile kaplanan tekstil yüzeylerinin çevre dostu indirgenmesi, fonksiyonel özelliklerin geliştirilmesi ve incelenmesi

    The environmentally friendly reduction of the textile coated with graphene oxide, the development and the examination of functional properties

    NERGİS DEMİREL GÜLTEKİN

    Doktora

    Türkçe

    Türkçe

    2021

    Tekstil ve Tekstil MühendisliğiMarmara Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    PROF. DR. İSMAİL USTA

    PROF. DR. BAHATTİN YALÇIN

  2. Jigger boya makinelerinde kullanılan hız ve gerginlik kontrol sistemlerinin matematiksel analizi

    Mathematical analysis of speed and tension control systems used in jigger dyeing machines

    LÜTFULLAH DAĞKURS

    Yüksek Lisans

    Türkçe

    Türkçe

    2002

    Tekstil ve Tekstil MühendisliğiUludağ Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. RECEP EREN

  3. A life cycle assessment of the membrane processes applied for salt recovery in reactive dyeing

    Reaktif boyamada tuz geri kazanımı için uygulanan membran proseslerinin yaşam döngüsü değerlendirmesi

    NAZ ZEYNEP ŞİMŞEK

    Yüksek Lisans

    İngilizce

    İngilizce

    2022

    Çevre MühendisliğiOrta Doğu Teknik Üniversitesi

    Çevre Mühendisliği Ana Bilim Dalı

    PROF. DR. ÜLKÜ YETİŞ

  4. Çarşamba (Samsun) yöresi kretase oluşuklarının stratigrafisinin incelenmesi

    Stratigraphic investigation of cretaceous formations in the area of Çarşamba (Samsun)

    ERSUN BAYRAKTAROĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    1988

    Jeoloji MühendisliğiAnkara Üniversitesi

    Jeoloji Mühendisliği Ana Bilim Dalı

    DOÇ.DR. VEDİA TOKER

  5. Kömür yıkama tesisleri ince artıklarının değerlendirilmesi

    Recovery of fine coal from tailings of coal washing plants

    VEDAT TAYLAN ENGİN

    Yüksek Lisans

    Türkçe

    Türkçe

    2002

    Maden Mühendisliği ve MadencilikDokuz Eylül Üniversitesi

    Maden Mühendisliği Ana Bilim Dalı

    PROF. DR. E. İLKNUR CÖCEN