Plastik ambalaj üretim tesisinde iş sağlığı ve güvenliği risk değerlendirmesi
Occupational health and safety risk assesment of plastic packaging production facilities
- Tez No: 397873
- Danışmanlar: PROF. DR. FATMA GÜLEN İSKENDER
- Tez Türü: Yüksek Lisans
- Konular: Çevre Mühendisliği, Environmental Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Çevre Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Çevre Bilimleri ve Mühendisliği Bilim Dalı
- Sayfa Sayısı: 205
Özet
İş sağlığı ve güvenliği kavramı, tehlikelerin önlenmesinin yanında risklerin öngörülmesi, değerlendirilmesi ve bu riskleri tamamen ortadan kaldırabilmek ya da zararlarını en aza indirebilmek için yapılacak çalışmaları içermektedir. Evrensel anlamda iş sağlığı ve güvenliği; henüz bir tehlike oluşmamış, işletmede bir arıza oluşmamışken bile işletmede oluşabilecek tehlikelerin ve risklerin öngörülerek bunların kabul edilebilir olup olmadığına karar verme çalışmalarını da beraberinde getirmektedir, yani eski“reaktif”yaklaşımlar yerini“proaktif”yaklaşımlara bırakmıştır. İş sağlığı ve güvenliğinde yeni yaklaşımın ana felsefesi; işyerlerinde risk değerlendirmesinin yapılması, çalışanların görüşlerinin alınması ve katılımlarının sağlanması, uzman katkısının sağlanması, çalışanların işyerindeki tehlikeler konusunda bilgilendirilmesi, çalışanlara eğitim verilmesi, koruma ve önleme bilincinin yerleştirilmesidir. Nitekim gelişmiş ülkelerde yıllardır uygulanan; iş güvenliği birimi kurma, uzman ve hekim istihdamı, iş güvenliği kurulu oluşturma, eğitim ve işyeri içi denetim mekanizmaları gibi önleyici araçlar, zaman içinde ülkemizde de uygulanmaya başlamıştır. Bu yönüyle bakıldığında modern, önleyici iş sağlığı ve güvenliği anlayışının en önemli uygulama basamağı, işyerlerinde uygun bir risk değerlendirmesi yapmaktır. Risk değerlendirmesi, iş sağlığı ve güvenliği çalışmalarının ilk adımıdır. İlk adım doğru atıldığı sürece, diğer çalışmalar da doğru şekilde yürütülebilmektedir. Sürekli gelişen dünya ile birlikte ülkemizde de plastik teknolojisi hızlı bir şekilde değişmekte ve gelişmektedir. Bu gelişmeler beraberinde bazı sıkıntıları da getirmektedir. Müşterilerin daha kaliteli ürün ve daha uygun fiyat beklentileri büyük bir rekabeti ortaya çıkarırken, firmaları sürekli araştırmaya itmektedir. Bunun için firmalar hem kaliteyi artırmak hemde maliyetlerini sürekli düşürmek için çaba sarf etmektedir. Firmalar rekabeti sağlayabilmek için gelişen teknolojiye ayak uydurmak zorunda kalmıştır. Tüm bunları yaparken çalışma şartları sürekli değişmekte insan kaynakları daha da önem kazanmaktadır. Bu yüzden hem üretim, hem müşteri hizmetleri, hem tasarım aşamasında ve ürünün son tüketiciye ulaşıncaya kadar, hatta müşterinin kullanım sonrası sıkıntılarını da çözecek ve tüm bunları yaparken de çalışanların ve işletmenin de güvenliğini etkilemeyecek şekilde olması için gerekli tedbirlerin alınması gerekliliği ön plana çıkmıştır. 6331 sayılı iş sağlığı iş güvenliği kanununun yürürlüğe girmesi ve bu bilincin özellikle bakanlığın denetimleriyle başlamış olması plastik sektöründe PAGEV ve PAGDER öncülüğünde tüm sektörün sürekli bilgilendirilmesi ile iş sağlığı ve iş güvenliği çalışmaları büyük bir hız kazanmıştır. Bu dernek ve vakıfların eğitim programlarına iş sağlığı ve iş güvenliğini almış olması bilinçlendirme çalışmalarını olumlu etkilemiş sektörün büyük kısmında uygulanmaya başlamıştır. Yasayla gelen plastik sektöründe bilinçli ve yetkin çalışan istihdam zorunluluğu mesleki ve iş sağlığı iş güvenliği eğitimleri ile işverenler tarafından yerine getirilecektir. Bu durum hem çalışan için hemde işveren için büyük kazanç sağlayacaktır. Çalışanlara bu sayede güvenli bir çalışma ortamı sağlanırken, işveren içinde, iş kazalarından kaynaklanan maddi ve manevi kayıpların maliyetleri azaltılmış olacaktır. Ayrıca acil durum planları sayesinde iş yeri güvenliği de büyük oranda sağlanacaktır. Bu durum işveren için başlangıçta maliyet artışı gibi görünse de iş kazlarının maddi ve manevi olumsuz etkileri ve iş yeri güvenliğinin sağlanması ile ilerde oluşabilecek yüksek zararlardan işverenler kurtulmuş olacaktır. Bu tezin temel hedefi, 6331 sayılı İş Kanunu'muza göre çıkartılmış olan tüm yönetmeliklerde bir yükümlülük olarak getirilen ve ülkemiz için çok önemli bir kavram olan risk değerlendirme yöntemlerini incelemek ve çok sık kullanılan 5x5 L tipi matris yöntemiyle plastik ambalaj sektöründe uygulamasını yapmaktır. Bu çalışmada, iş sağlığı ve güvenliği kapsamında seçilen plastik ambalaj üretimi yapan fabrikada saha çalışmaları esas alınarak, tesise ilişkin risk analizlerinin yapılması ve risk skorlarının belirlenmesi amaçlanmıştır. Bu kapsamda iş sağlığı ve güvenliği ile ilgili temel tanımlar ve kavramlarla birlikte, risk değerlendirmesinin ulusal ve uluslar arası mevzuatta ve standartlardaki yeri ortaya konulmuştur. Dünyada ve Türkiye'de risk analizi çalışmalarında işletmelerin kullandığı ve literatürde de yer alan farklı yöntemlerin detayları açıklanmış ve karşılaştırılması yapılmıştır. Tesiste üretimin temelini oluşturan levha ekstrüder ve termoform proseslerinin literatür bilgileri verildikten sonra detaylı akım şemaları oluşturulmuştur. Tesisin proseslerde kullandığı kimyasallar, hammaddeler ve katkı malzemesi verileri toplanmıştır. Tesiste oluşan atıklar listenmiş ve tesisin çevre mevzuatına göre yeri belirlenerek, yönetmeliklere olan uyumu araştırılmıştır. Çalışmada, plastik ambalaj üretiminin iki önemli prosesi olan levha ekstrüder ve ısıl şekilleme (termoform) proseslerinde, 5x5 L tipi matris yöntemi kullanılarak risk analizi çalışması yapılmıştır. Tesis saha denetimlerinde ana tehlikeler başta olmak üzere, görünen tüm tehlikeler listelenmiş, olasılıkları ve şiddetleri belirlenmiş ve bu değerler kullanılarak risk skoru hesaplanmıştır. Bulunan risk skorlarına göre yüksek, orta ve düşük riskler olarak sınıflandırma yapılmış ve risklere yönelik alınması gereken önlemler belirlenmiştir. Çalışmada 60 adet tehlike belirlenmiş olup bunların 20 adeti yüksek risk statüsündedir. Bulunan tehlikeler için alınması gereken önlemler belirlenmiştir.
Özet (Çeviri)
The occupational health and safety prevent the financial and social process originating from industrial accidents and occupational diseases caused by operational environments. Besides, studies play important roles in the issues such as ; protection and promotion of workers' health, development of working capacity and skills,establishment and prosecution of safe and healthy environment for all stakeholders. Each year, considerable amount of people lose their life or become disabled due to work accidents or occupational diseases which may be prevented or are to be prevented legally. That is why risk assessment is so important, as the key to healthy workplaces. Risk assessment is a dynamic process that allows enterprises and organisations to put in place a proactive policy of managing workplace risks. For these reasons, it is important that all types and sizes of enterprise carry out regular assessments. Proper risk assessment includes, among others things, making sure that all relevant risks are taken into account (not only the immediate or obvious ones), checking the efficiency of the safety measures adopted, documenting the outcomes of the assessment and reviewing the assessment regularly to keep it updated. It is seen that the increase in occupational accidents and deaths in recent years are the results of insufficient precautions on work health and safety issues; and the desired results are not achieved by changing regulations. In order to minimize risks and their negative consequences, risk analysis is needed. Risk analysis indicates some alternatives to reduce the unfavorable outcomes. Nowadays the technology is developing day by day so that we need risk analysis more than ever. Risk analysis helps people to figure out the reasons of accidents or incidents reasons and to do that; firstly identifies hazards, then estimates risks and finally finds some ways to manage it. The occupational health and safety concept, besides preventing dangerous situations, includes predicting and considering risks, removing them off completely or minimizing their effects. On a global scale, this concept involves foreseeing hazards and deciding whether or not they are on an acceptable level even before they arise. This means that, the proactive approach replaces the old reactive one. Main philosophy behind this new approach consists of risk assesment at work place, receiving employees' opinion and contribution, procuring experts' assistance, informing and training staff on hazards at workplace and raising awareness on protection and prevention. Turkey started to employ methods used by developed countries for years, those are, founding an occupational safety unit and council, employing experts and medical attendants, using protection tools like training and internal audit mechanism. From this point of view, the main step of preventive occupational health and safety is making a suitable risk assesment. It is also the first step of this process. That is why, it is really important to make a correct risk assesment to carry out the rest of the process smoothly. In our country, along with the constantly advancing world, plastic technology is also rapidly changing and evolving. These developments also bring some difficulties with it. Customers' expectations of higher quality products and lower prices, exposing a great competition between companies and urging them to continious researches. Therefore, companies looking to increase the quality and striving to reduce cost. Firms have been forced to keep pace with evolving technology to ensure competition. While all of these occur, working conditions are constantly changing and human resources are gaining more and more importance. For this reason, managements of the companies will take the necessary measures to ensure the requirement has been in the forefront for the safety of employees and the company in both production stage and customer service, both at the design stage until the product reaches to the final consumer, even after the customer's use or to solve difficulties after use. With the enactment of occupational health & safety legislation no: 6331 and especially after the ministry's control has started, all of the industry to be kept informed under the leadership of PAGEV and PAGDER and occupational health and safety studies have gained a great speed. Educational programs of these associations and foundations have a positive impact on occupational health and safety awareness activities and in the majority of industry it started to be implemented. Obligation from the law, it became a necessity to employ conscious and competent staff in plastic industry. In this condition, both the employees and the employers will gain a great benefit. Thus, while maintaining a safe working environment for employees, the cost of material and moral losses arising from work-related accidents will be reduced for employers. Moreover, through the emergency plans, large proportion of workplace safety will also be provided. This situation may seem like a cost increase for employers at the beginning. However, by ensuring the material and spiritual negative effects of work-related accidents and workplace safety, employers will be throw up the higher losses that may occur in the future In this study, it is aimed to determine occupational health and safety risk scores and carry out risk analysis according to the site visits within the chosen plastic packaging factory. In this study, definitions related to occupational health and safety is made together with the risk analysis definitions that are made in national and international legislation and standards. In this study; after giving plate extruder and termoforming processes' literature information, detailed flow diagram is formed. Chemicals, raw materials and additives data used by the facility is collected. Facility's waste is listed, according to environmental legislation, it is located and its regulatory compliance is researched. General information about the risk of accidents occurring and working parts of the machine are given in plastic packaging manufacturing facilities. Facility inspections and observations made in the field, which may affect the workers' health and safety hazards are identified. For the identified hazards, what would be the likelihood of danger and violence arise, analyzed with the observations and experience are determined numerically. Numerically determined by multiplying the severity and probability values, it has emerged a risk score. This risk score values determined for each hazard and danger with high and medium risk assessment score are listed in the table. In this study, different risk analysis methodologies that are used by the plants and also appear in the literature are described in details. In this study, plastic packaging factory is visited and risk analysis study has been made by using 5x5 L Matrix methodology. All possible hazards are listed, likelihood and severity of the hazards are determined and by using these values, risk scores are calculated. Accordingly,comparisons are made by using risk scores for the hazards and the highest risks are determined. Field tours were conducted in the company where 20 high risk processes were determined and risk assessment was implemented for each of these processes.
Benzer Tezler
- Plastik sektöründe fine kinney metodu ile risk değerlendirmesi
Risk assessment with fine kinney method in plastic industry
YASEMİN YAMURLUKLU
Yüksek Lisans
Türkçe
2019
Halk SağlığıGazi Üniversitesiİş Sağlığı ve Güvenliği Ana Bilim Dalı
PROF. DR. MUSTAFA NECMİ İLHAN
- Polivinil klorür (PVC) geri dönüşüm tesisinin yangın güvenliği ve fine kinney analiz metodu ile yangın riskinin değerlendirilmesi
Fire safety of polyvinyl chloride (PVC) recycling facility and assessment of fire risk using fine kinney analysis method
ALİ ZEYNELGİL
Yüksek Lisans
Türkçe
2024
KimyaSakarya ÜniversitesiYangın ve Yangın Güvenliği Anabilim Dalı
PROF. DR. MUSTAFA ŞAHİN DÜNDAR
- Plastik imalat sektöründe iş sağlığı ve güvenliği risk değerlendirmesi: Küçük ölçekli bir plastik ambalaj üretim tesisi örneği
Occupational health and safety risk assessment in the plastic manufacturing sector: An example of a small-scale plastic packaging production facility
SUNA YILDIRIM
Yüksek Lisans
Türkçe
2022
İşletmeİstanbul Rumeli Üniversitesiİş Sağlığı ve Güvenliği Ana Bilim Dalı
PROF. DR. BEYHAN BOLAK HİSARLIGİL
- Rijit plastik gıda ambalajı imalat prosesinde görüntü işleme tabanlı ürün kalite kontrolü
Image processing based product quality control in rigid plastic food packaging manufacturing process
İSMET FATİH ŞEKEROĞLU
Yüksek Lisans
Türkçe
2019
Makine MühendisliğiKonya Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. METE KALYONCU
- Ham polietilen ve %50 geri dönüştürülmüş polietilen içeren esnek ambalaj üretiminin karşılaştırmalı yaşam döngüsü analizi
Comparative life cycle assessment of packaging production containing virgin polyethylene and 50% recycled polyethylene
SAVAŞ OĞUZ
Yüksek Lisans
Türkçe
2024
Kimya MühendisliğiYıldız Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. DİLEK DURANOĞLU DİNÇER
PROF. DR. GÖKÇEN ALEV ÇİFTÇİOĞLU