Geri Dön

A wellbore heat transfer model for steam injection as enhanced oil recovery method

Geliştirimiş petrol kurtarım yöntemi olan buhar enjeksiyonu için kuyu içi ısı transfer modeli

  1. Tez No: 398656
  2. Yazar: RAYAN HOSAM ALDEEN RASHEED
  3. Danışmanlar: DOÇ. DR. RECEP YUMRUTAŞ, PROF. DR. MAHMUT PARLAKTUNA
  4. Tez Türü: Yüksek Lisans
  5. Konular: Makine Mühendisliği, Mechanical Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2015
  8. Dil: İngilizce
  9. Üniversite: Gaziantep Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Enerji Bilim Dalı
  13. Sayfa Sayısı: 127

Özet

Petrol kuyularında ham petrolün vizkositesinin artması petrol üretim kapasitesini azaltmaktadır. Bu yüzden, petrol üretimini artırmak için vizkozitenin düşürülmesi gerekmektedir. Bu amaçla, ağır petrolün çıkarılmasında en önemli yöntemlerden biri olan buhar enjeksiyon yöntemi kullanılmaktadır. Buhar enjeksiyon yönteminin kullanıldığı kuyularda; buhardan kuyu çevresindeki jeolojik yapıya geçen ısı transferinin hassas olarak hesaplanması, böyle bir sistemin tasarımı için oldukça önemlidir. Bu tez çalışmasında, buhar jeneratörü, buhar taşıma boruları ve petrol kuyusundan oluşan ısıl sistemin ısı transfer analizi gerçekleştirilmiştir. Kuyu çevresinde bulunan jeolojik yapının ısıl ve fiziksel özelliklerinin ısıl sistem performansı üzerindeki etkilerini görmek amacıyla formülasyonları esas alan bir denklem çözücü (EES, Engineering Equation Solver) program hazırlanmıştır. Bu program kullanılarak buharın kuruluk derecesi, sıcaklığı ve basıncı ile buhardan kuyu çevresine geçen ısı transferi; ayrıca buhar ile buhar CO2 karışım enjeksiyonu için hesaplanmıştır. Hesaplamalardan elde edilen sonuçlar grafiklerle verilerek tartışılmıştır. Son olarak, GLM (General Linear Model), ANOVA (Analysis of Variance) ve analitik model kullanılarak istatistiksel analizler yapılmıştır. Bu analizler; boru uzunluğu ve dış çapı, kuyu derinliği, yalıtım malzemelerinin özellikleri ve buhar enjeksiyon zamanı gibi bazı önemli parametreleri kalibre etmek için basit formüller elde edilmiş ve buhar enjeksiyon sisteminin değerlendirilmesinde kullanılmıştır.

Özet (Çeviri)

Increasing of viscosity in heavy oil reservoir lessens oil production capacity. Therefore, it is necessary to decrease the oil viscosity in order to increase the production capacity. For this purpose, steam injection method is one of the most important techniques which are used to enhance the heavy oil production capacity. The accurate estimation regarded the heat loss from steam to geological structure surrounding the well is of utmost importance for design of such a thermal system. In this thesis, thermal analysis for the thermal system consisting of a surface transmission line and a wellbore well is performed. Formulations for the heat losses along the steam distribution line and wellbore during steam injection, and some parameters are expressed in this analysis. A computer program in EES (Engineering Equation Solver) based on the formulations is prepared to see effects of thermophysical properties of the geological structure surrounding the well on the performance parameters of the system. The performance parameters such as steam quality, temperatures and pressures of the steam, and heat loss from the wellbore are computed by using the program for both conditions of steam injection and steam with the non-condensable gas CO2. Results obtained from the computations are given as figures and discussed in this study. Finally, statistical analyses by using General Linear Model (GLM), Analysis of Variance (ANOVA) and analytical modeling through multiple linear regression technique are carried out. The analyses are used to obtain simple mathematical formulations for calibrating some significant parameters such as line length, outside radius of pipe, wellbore depth, properties of insulation materials and steam injection time in order to evaluate the steam injection system.

Benzer Tezler

  1. Steam injection model for gas production from a hydrate reservour

    Hidrat reservuarında buhar enjeksiyonu ile gaz üretimi

    NURAY CEYHAN

    Yüksek Lisans

    İngilizce

    İngilizce

    1996

    Petrol ve Doğal Gaz MühendisliğiOrta Doğu Teknik Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MAHMUT PARLAKTUNA

  2. Estimation of formation temperatures from return line mud temperatures for several geothermal fields

    Bir takım jeotermal sahaların geri dönüş hattındaki çamur sıcaklıklarından formasyon sıcaklığının tahmin edilmesi

    OĞUZ BERK EVCİMEN

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    Petrol ve Doğal Gaz Mühendisliğiİstanbul Teknik Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MUSTAFA HAKAN ÖZYURTKAN

  3. A study on heat transfer inside the wellbore during drilling operations

    Sondaj esnasında kuyu içerisindeki ısı aktarımı ile ilgili bir çalışma

    ESAT CAN APAK

    Yüksek Lisans

    İngilizce

    İngilizce

    2006

    Petrol ve Doğal Gaz MühendisliğiOrta Doğu Teknik Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. EVREN ÖZBAYOĞLU

  4. Modeling and interpreting transient sandface temperatures in presence of momentum and skin effects under nonisothermal single-phase liquid flow conditions

    Petrol rezervuarlarında tek-fazlı sıvı akışı koşullarında momentum ve zar etkileri altında kuyudibi sıcaklık davranışlarının modellenmesi ve yorumlanması

    SERHAT KOÇAK

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    Petrol ve Doğal Gaz Mühendisliğiİstanbul Teknik Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    PROF. DR. MUSTAFA ONUR

  5. Batı Karadeniz'in Tuna Deltası'ndaki gaz hidratlardan farklı kuyu konfigürasyonlarında gaz üretimi

    Gas production from the gas hydrates in the danube delta of the Western Black Sea with different wellbore configurations

    İBRAHİM MUHAMMED UBEYD

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Petrol ve Doğal Gaz MühendisliğiBatman Üniversitesi

    Petrol ve Doğal Gaz Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ŞÜKRÜ MEREY